[PATCH v4 1/1] add support for Seagate BlackArmor NAS220

in blue color. The third led is wired to show the SATA activity on the two drives. Signed-off-by: Evgeni Dobrev --- arch/arm/boot/dts/Makefile |1 + arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts | 172 ++ 2 files changed, 173 insertions

[PATCH v4 0/1] add support for Seagate BlackArmor NAS220

reduce button labels to "Reset" and "Power" use GPIO_ACTIVE_LOW for regulator's gpio property v3: documented UART pinout in dts v2: indent with tabs only removed NAND layout Evgeni Dobrev (1): add support for Seagate BlackA

Re: [PATCH v3 1/1] add support for Seagate BlackArmor NAS220

Hello Sebastian, On Thu, Dec 25, 2014 at 02:08:12PM +0100, Sebastian Hesselbarth wrote: > On 22.12.2014 13:57, Evgeni Dobrev wrote: > >This patch adds support for Seagate BlackArmor NAS220. > > > >The Seagate BlackArmor NAS 220 is a NAS system based on Marvell 88f6192. It &g

[PATCH v3 1/1] add support for Seagate BlackArmor NAS220

in blue color. The third led is wired to show the SATA activity on the two drives. Signed-off-by: Evgeni Dobrev --- arch/arm/boot/dts/Makefile|1 + arch/arm/boot/dts/kirkwood-nas220.dts | 166 + 2 files changed, 167 insertions(+) create mode

[PATCH v3 0/1] add support for Seagate BlackArmor NAS220

v3: documented UART pinout in dts v2: indent with tabs only removed NAND layout Evgeni Dobrev (1): add support for Seagate BlackArmor NAS220 arch/arm/boot/dts/Makefile|1 + arch/arm/boot/dts/kirkwood-nas220.dts | 166 + 2 files

[PATCH v2 1/1] add support for Seagate BlackArmor NAS220

in blue color. The third led is wired to show the SATA activity on the two drives. Signed-off-by: Evgeni Dobrev --- arch/arm/boot/dts/Makefile|1 + arch/arm/boot/dts/kirkwood-nas220.dts | 158 + 2 files changed, 159 insertions(+) create mode

[PATCH v2 0/1] add support for Seagate BlackArmor NAS220

v2: indent with tabs only removed NAND layout Evgeni Dobrev (1): add support for Seagate BlackArmor NAS220 arch/arm/boot/dts/Makefile|1 + arch/arm/boot/dts/kirkwood-nas220.dts | 158 + 2 files changed, 159 insertions(+) create

[PATCH v2 1/1] ARM: dts: kirkwood: enable phy driver for SATA controller on 88f6192

This patch enables the phy drivers for the SATA controller on Marvell's 88f6192. Without them it is not possible to use SATA drives attached to this processor. Signed-off-by: Evgeni Dobrev --- arch/arm/boot/dts/kirkwood-6192.dtsi |2 ++ 1 file changed, 2 insertions(+) diff --git a/arc

[PATCH v2 0/1] ARM: dts: kirkwood: enable phy driver for SATA controller on 88f6192

v2: indent with tabs only wrap change log at 80 chars Evgeni Dobrev (1): enable phy driver for SATA controller on 88f6192 arch/arm/boot/dts/kirkwood-6192.dtsi |2 ++ 1 file changed, 2 insertions(+) -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubs

Re: [PATCH 1/2] ARM: dts: kirkwood: enable phy driver for SATA controller on 88f6192

Hello Thomas, On Tue, Dec 16, 2014 at 05:01:38PM +0100, Thomas Petazzoni wrote: > Dear Evgeni Dobrev, > > On Mon, 15 Dec 2014 21:37:24 +0100, Evgeni Dobrev wrote: > > This patch enables the phy drivers for the SATA controller on Marvell's > > 88f6192. Without them it i

Re: [PATCH 2/2] ARM: dts: kirkwood: add dts support for Seagate BlackArmor NAS220

Hi Andrew, On Tue, Dec 16, 2014 at 09:56:45AM +0100, Andrew Lunn wrote: > On Mon, Dec 15, 2014 at 09:38:55PM +0100, Evgeni Dobrev wrote: > > This patch adds support for Seagate BlackArmor NAS220. > > Hi Evgeni > > Thanks for the patch. It looks good apart from a few minor

[PATCH 1/2] ARM: dts: kirkwood: enable phy driver for SATA controller on 88f6192

This patch enables the phy drivers for the SATA controller on Marvell's 88f6192. Without them it is not possible to use SATA drives attached to this processor. Signed-off-by: Evgeni Dobrev --- arch/arm/boot/dts/kirkwood-6192.dtsi |2 ++ 1 file changed, 2 insertions(+) diff --git a

[PATCH 2/2] ARM: dts: kirkwood: add dts support for Seagate BlackArmor NAS220

results in blue color. The third led is wired to show the SATA activity on the two drives. Signed-off-by: Evgeni Dobrev --- arch/arm/boot/dts/Makefile|1 + arch/arm/boot/dts/kirkwood-nas220.dts | 182 + 2 files changed, 183 insertions(+) create