Output ver_linux:
Gnu C 2.96
Gnu make 3.79.1
binutils 2.11.90.0.8
util-linux 2.11e
mount 2.11e
modutils 2.4.6
e2fsprogs 1.21
reiserfsprogs 3.x.0j
PPP2.4.1
Linux C
Output ver_linux:
Gnu C 2.96
Gnu make 3.79.1
binutils 2.11.90.0.8
util-linux 2.11e
mount 2.11e
modutils 2.4.6
e2fsprogs 1.21
reiserfsprogs 3.x.0j
PPP2.4.1
Linux C
Output ver_linux:
Gnu C 2.96
Gnu make 3.79.1
binutils 2.11.90.0.8
util-linux 2.11e
mount 2.11e
modutils 2.4.6
e2fsprogs 1.21
reiserfsprogs 3.x.0j
PPP2.4.1
Linux C
It seem that I have resolved the problem. Yes, I've read 8139too.txt and
I thought to recheck my kernel 2.4.4 configuration.
It looked this:
CONFIG_NET_ETHERNET=y
CONFIG_NET_PCI=y
CONFIG_8139TOO=m
CONFIG_8139TOO_PIO=m
En Sun, 6 May 2001 13:03:03 -0400
Ignacio Monge <[EMAIL PROTECTED]> escribió:
>
> I've compiled 2.4.3mdk-25 source with Athlon optimizations, and the
> problem still happens.
>
> eth0 Link encap:Ethernet HWaddr FF:FF:FF:FF:FF:FF
> inet
I've compiled 2.4.3mdk-25 source with Athlon optimizations, and the
problem still happens.
eth0 Link encap:Ethernet HWaddr FF:FF:FF:FF:FF:FF
inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500
I've compiled 2.4.3mdk-25 source with Athlon optimizations, and the
problem still happens.
eth0 Link encap:Ethernet HWaddr FF:FF:FF:FF:FF:FF
inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500
En Sun, 6 May 2001 13:03:03 -0400
Ignacio Monge [EMAIL PROTECTED] escribió:
I've compiled 2.4.3mdk-25 source with Athlon optimizations, and the
problem still happens.
eth0 Link encap:Ethernet HWaddr FF:FF:FF:FF:FF:FF
inet addr:192.168.0.1 Bcast
It seem that I have resolved the problem. Yes, I've read 8139too.txt and
I thought to recheck my kernel 2.4.4 configuration.
It looked this:
CONFIG_NET_ETHERNET=y
CONFIG_NET_PCI=y
CONFIG_8139TOO=m
CONFIG_8139TOO_PIO=m
Hi, here I again with another problem :)
Since I have installed kenel 2.4.3 & 2.4.4 (nothing went wrong with
default kernel in MDK 8, 2.4.3mdk), my ethernet card is not recognized
correctly.
This is my ifconfig output:
eth0 Link encap:Ethernet HWaddr
Hi, here I again with another problem :)
Since I have installed kenel 2.4.3 2.4.4 (nothing went wrong with
default kernel in MDK 8, 2.4.3mdk), my ethernet card is not recognized
correctly.
This is my ifconfig output:
eth0 Link encap:Ethernet HWaddr
The same thing happens to me. I've tried to start my ethernet, but my
system hangs and, after a forced restart, the BIOS has cleared all my
setup configuration (!).
kernel 2.4.4 / modutils 2.4.5
VIA 868a, Athlon Thunderbidth 1 Ghz, 384 Mb RAM. Mandrake 8. Gcc 2.96.
The same thing happens to me. I've tried to start my ethernet, but my
system hangs and, after a forced restart, the BIOS has cleared all my
setup configuration (!).
kernel 2.4.4 / modutils 2.4.5
VIA 868a, Athlon Thunderbidth 1 Ghz, 384 Mb RAM. Mandrake 8. Gcc 2.96.
Hi.
I have VIA686a too and a UDMA100 hard disk.
This is my cat /proc/ide/via:
--VIA BusMastering IDE Configuration
Driver Version: 3.23
South Bridge: VIA vt82c686a
Revision: ISA
Hi.
I have VIA686a too and a UDMA100 hard disk.
This is my cat /proc/ide/via:
--VIA BusMastering IDE Configuration
Driver Version: 3.23
South Bridge: VIA vt82c686a
Revision: ISA
El Mié 18 Abr 2001 15:16, escribiste:
> I don't know about other possible problems with the kernel, but you must
> use an 80 wire IDE cable for UDMA66/100 to work.
>
> > ---Primary IDE---Secondary IDE--
> > Cable Type: 40w 40w
Hi. I have a ASUS A7V133 Motherboard with AMD ThinderBird 1 Ghz, and
PDC20265/VIA. I've tried all the possible combinations on "IDE, ATA and ATAPI
Block devices". I've read the "Unofficial Asus A7V and Linux ATA100
"Quasi-Mini-Howto" on http://www.geocities.com/ender7007/. But I
Hi. I have a ASUS A7V133 Motherboard with AMD ThinderBird 1 Ghz, and
PDC20265/VIA. I've tried all the possible combinations on "IDE, ATA and ATAPI
Block devices". I've read the "Unofficial Asus A7V and Linux ATA100
"Quasi-Mini-Howto" on http://www.geocities.com/ender7007/. But I
El Mi 18 Abr 2001 15:16, escribiste:
I don't know about other possible problems with the kernel, but you must
use an 80 wire IDE cable for UDMA66/100 to work.
---Primary IDE---Secondary IDE--
Cable Type: 40w 40w
Trying to compile this kernel I got this message:
[...]
make[2]: Cambiando a directorio `/usr/src/linux/mm'
gcc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2
-fomit-frame-pointer -fno-strict-aliasing -pipe -mpreferred-stack-boundary=2
-march=i686
Trying to compile this kernel I got this message:
[...]
make[2]: Cambiando a directorio `/usr/src/linux/mm'
gcc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2
-fomit-frame-pointer -fno-strict-aliasing -pipe -mpreferred-stack-boundary=2
-march=i686
Problem: compile error in linux-2.4.0-prerelease-ac6
System:
Intel Pentium II 233 Mhz 96 Mb RAM
Red Hat Linux System 7.0
Glibc-2.2-5
Gcc-2.95.2-12
Output error:
[...]
ld -m elf_i386 -r -o drm.o tdfx.o drmlib.a
make[4]: Saliendo directorio
Problem: compile error in linux-2.4.0-prerelease-ac6
System:
Intel Pentium II 233 Mhz 96 Mb RAM
Red Hat Linux System 7.0
Glibc-2.2-5
Gcc-2.95.2-12
Output error:
[...]
ld -m elf_i386 -r -o drm.o tdfx.o drmlib.a
make[4]: Saliendo directorio
Kernel Bug: Total freeze of the system after random time.
Description: From 2.4.0test12 (patch 7), 2.4.0-test13pre2 too, my linux system
freeze EVER after a variable time (one hour or two). There is not a backtrace,
or kernel message dump, it only stayed freezed y I must restart the computer.
Kernel Bug: Total freeze of the system after random time.
Description: From 2.4.0test12 (patch 7), 2.4.0-test13pre2 too, my linux system
freeze EVER after a variable time (one hour or two). There is not a backtrace,
or kernel message dump, it only stayed freezed y I must restart the computer.
25 matches
Mail list logo
