Ethernet PHY on BananaPi M2 Berry provides RX and TX delays. Fix ethernet
node to reflect that fact.
Fixes: 27e81e1970a8 ("ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC
ethernet controller")
Signed-off-by: Pablo Greco
---
arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts | 2
to 3.3 V in order to fix this.
Fixes: 23edc168bd98 ("ARM: dts: sun8i: Add board dts file for Banana Pi M2
Berry")
Fixes: 27e81e1970a8 ("ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC
ethernet controller")
Signed-off-by: Pablo Greco
---
arch/arm/boot/dts/sun8i-v40-banana
t;net: phy: realtek: fix rtl8211e
rx/tx delay config").
Fixes: 8a5b272fbf44 ("ARM: dts: sun7i: Add Banana Pi board")
Signed-off-by: Pablo Greco
---
arch/arm/boot/dts/sun7i-a20-bananapi.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sun7i-a20-
Ethernet PHY on BananaPi M2 Berry provides RX and TX delays. Fix ethernet
node to reflect that fact.
Fixes: 27e81e1970a8 ("ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC
ethernet controller")
Signed-off-by: Pablo Greco
---
arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts | 2
t;net: phy: realtek: fix rtl8211e
rx/tx delay config").
Fixes: 8a5b272fbf44 ("ARM: dts: sun7i: Add Banana Pi board")
Signed-off-by: Pablo Greco
---
arch/arm/boot/dts/sun7i-a20-bananapi.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sun7i-a20-
to 3.3 V in order to fix this.
Fixes: 23edc168bd98 ("ARM: dts: sun8i: Add board dts file for Banana Pi M2
Berry")
Fixes: 27e81e1970a8 ("ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC
ethernet controller")
Signed-off-by: Pablo Greco
---
arch/arm/boot/dts/sun8i-v40-banana
Now that the regulators are tied to the GPIO bank, we can remove the
unneeded regulator-always-on in reg_aldo2
Signed-off-by: Pablo Greco
---
arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
b
Just like the Bananapi M2 Ultra, enable the ahci controller and
the two regulators needed to activate it.
Reviewed-by: Jagan Teki
Signed-off-by: Pablo Greco
---
arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts | 18 ++
1 file changed, 18 insertions(+)
diff --git a/arch/arm
.
And any other devices that use muxed pins are guaranteed to be
initialized after the pin controller. Thus having the CLK_OUT_A pinmux
reference be in the pin controller node is a good choice without having
to deal with implementation issues.
Signed-off-by: Pablo Greco
---
arch/arm/boot/dts
This patch adds the hdmi nodes to the Bananapi M2 Berry, the same way it
was done to the Bananapi M2 Ultra
Signed-off-by: Pablo Greco
---
arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts | 29 +++
1 file changed, 29 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-v40
Just like was done for the bananapi-m2-ultra, add the second wifi/bt
regulator and mark both as always-on.
Signed-off-by: Pablo Greco
---
arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts | 15 +++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi
Since the bananapi-m2-ultra and the bananapi-m2-berry have the same
WiFi/Bluetooth, add the required nodes to the bananapi-m2-berry.
Signed-off-by: Pablo Greco
---
arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts | 21 +
1 file changed, 21 insertions(+)
diff --git a/arch
12 matches
Mail list logo