On Sun 2024-06-16 20:55:41, Markus Elfring wrote:
> > The SY7802 is a current-regulated charge pump which can regulate two
> > current levels for Flash and Torch modes.
> >
> > It is a high-current synchronous boost converter with 2-channel high
> > side current sources. Each channel is able to del
Hi!
> The tag is there in the repository:
>
>
> https://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-stable-rt.git/commit/?h=v5.10.214-rt106-rebase
>
> When I released 5.10.215-rt107 (and its -rebase counterpart),
> 5.10.214-rt106-rebase
> was no longer pointing to a commit inside that
Hi!
> I'm pleased to announce the 5.10.214-rt106 stable release.
>
> This release is simply an update to the new stable 5.10.214 version and no
> RT-specific changes have been performed.
>
> You can get this release via the git tree at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/rt/lin
Hi!
> I'm pleased to announce the 5.10.213-rt105 stable release.
>
> This release is an update to the new stable 5.10.213 version and no extra
> changes have been performed.
Thanks for release.
I see v5.10.214-rt106-rc1 is out there and now v5.10.215-rt107-rc1,
but I don't see v5.10.214-rt106 (
but having basic support
> > in mainline is needed to be able to work on the other stuff
> > (networking, cameras, power management).
> >
> > Signed-off-by: Ondrej Jirman
> > Co-developed-by: Martijn Braam
> > Co-developed-by: Samuel Holland
> > Signed-of
Hi!
> > Add binding for anx7688 usb type-c bridge. I don't have a datasheet,
> > but I did best I could.
> >
> > Signed-off-by: Pavel Machek
>
> ...
>
> > + cabledet-gpios:
> > +maxItems: 1
> > +description: GPIO co
ainline is needed to be able to work on the other stuff
(networking, cameras, power management).
Signed-off-by: Ondrej Jirman
Co-developed-by: Martijn Braam
Co-developed-by: Samuel Holland
Signed-off-by: Pavel Machek
---
v2: Fix checkpatch stuff. Some cleanups, adapt to dts format in 1/2.
v3:
Add binding for anx7688 usb type-c bridge. I don't have a datasheet,
but I did best I could.
Signed-off-by: Pavel Machek
---
v2: implement review feedback
v3: fix single character pointed by robot
diff --git a/Documentation/devicetree/bindings/usb/analogix,anx7688.yaml
b/Document
Hi!
> I'm sorry to keep you waiting.
Thanks for comments.
> > + struct gpio_desc *gpio_reset;
> > + struct gpio_desc *gpio_cabledet;
> > +
> > + uint32_t src_caps[8];
>
> Use u32 instead of uint32_t.
Will replace globally.
> > +static int anx7688_reg_read(struct anx7688 *anx7688, u8 reg
here, but having basic support
> in mainline is needed to be able to work on the other stuff
> (networking, cameras, power management).
>
> Signed-off-by: Ondrej Jirman
> Co-developed-by: Martijn Braam
> Co-developed-by: Samuel Holland
> Signed-off
Hi!
> Add binding for anx7688 usb type-c bridge. I don't have a datasheet,
> but I did best I could.
>
> Signed-off-by: Pavel Machek
Any more comments here? Automatic system told me I need to replace one
character
ainline is needed to be able to work on the other stuff
(networking, cameras, power management).
Signed-off-by: Ondrej Jirman
Co-developed-by: Martijn Braam
Co-developed-by: Samuel Holland
Signed-off-by: Pavel Machek
---
v2: Fix checkpatch stuff. Some cleanups, adapt to dts format in 1/2.
di
Add binding for anx7688 usb type-c bridge. I don't have a datasheet,
but I did best I could.
Signed-off-by: Pavel Machek
---
v2: implement review feedback
diff --git a/Documentation/devicetree/bindings/usb/analogix,anx7688.yaml
b/Documentation/devicetree/bindings/usb/analogix,anx7688
Hi!
> > + reset-gpios:
> > +maxItems: 1
>
> blank line
>
> > + avdd10-supply:
> > +description:
> > + 1.0V power supply
>
> Keep description in one line and add a blank line. This code is not that
> readable.
>
> > + i2c-supply:
> > +description:
> > + Power supply
>
Hi!
> > Add binding for anx7688 usb type-c bridge. I don't have a datasheet,
> > but I did best I could.
> >
> > Signed-off-by: Pavel Machek
> >
>
> You miss proper diffstat which makes reviewing difficult.
> Actually entire patch is corrupte
Add binding for anx7688 usb type-c bridge. I don't have a datasheet,
but I did best I could.
Signed-off-by: Pavel Machek
diff --git a/Documentation/devicetree/bindings/usb/analogix,anx7688.yaml
b/Documentation/devicetree/bindings/usb/analogix,anx7688.yaml
new file mode 100644
Hi!
> > From: Ondrej Jirman
> >
> > This is driver for ANX7688 USB-C HDMI, with flashing and debugging
> > features removed. ANX7688 is rather criticial piece on PinePhone,
> > there's no display and no battery charging without it.
>
> Don't remove the flashing part. Some Pinephones come withou
Hi!
> > --- /dev/null
> > +++ b/drivers/usb/typec/anx7688.c
> > @@ -0,0 +1,1866 @@
> > +/*
> > + * ANX7688 USB-C HDMI bridge/PD driver
> > + *
>
>
>
> Did this pass checkpatch? I need a spdx line for new files please,
> don't force us to go back and guess in the future, that isn't nice.
Thank
ainline is needed to be able to work on the other stuff
(networking, cameras, power management).
Signed-off-by: Ondrej Jirman
Signed-off-by: Martijn Braam
Signed-off-by: Samuel Holland
Signed-off-by: Pavel Machek
diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig
index 2f
Hi!
> > We (as in cip project), are trying to do -cip-rt releases
> > once a month. Are there any plans for 5.10-rt release any time soon?
> > That would help us ;-).
>
> I already pushed v5.10-rt-next (containing v5.10.209-rt101-rc1) to
> kernel.org and kernelci should pick that up for comprehen
Hi!
We (as in cip project), are trying to do -cip-rt releases
once a month. Are there any plans for 5.10-rt release any time soon?
That would help us ;-).
Best regards,
Pavel
--
DENX Software Engineering GmbH,Managing Direct
Hi!
> Isn't this simply the case of picking the gc2145 bits from Megis tree?
>
> https://megous.com/git/linux/tree/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi?h=orange-pi-5.10#n410
Well, that, adjusting dts bits to the new driver, testing and
submitting the patch. And it looks someon
Hi!
In 6.8-rc0, driver for gc2145 (front camera on pinephone) was merged,
but we don't have corresponding dts entries. Does anyone have setup
where they can fix it easily?
[If you have hints how to set-up pinephone for kernel development,
that would be welcome. Currently I have mobian with rather
Hi!
> This serie adds support for the GalaxyCore GC2145 sensor.
> Initialization is based on scripts provided by GalaxyCore,
> allowing 3 fixed configurations supported for the time being.
There is another version of the driver, from Ondrej Jirman, floating
around. See mail "gc2145 camera driver
Hi!
> I'm pleased to announce the 5.10.199-rt97 stable release.
>
> This release is an update to the new stable 5.10.199 version and no
> RT-specific changes were made, with the exception of a fix to a build
> failure due to upstream changes affecting only the PREEMPT_RT code.
Thanks for the rel
Hi!
> With the driver for ktd2026 recently applied to linux-leds[1], the LED
> can be enabled on longcheer l8910 and l9100.
Please make sure sysfs name is consistent with notification LED on
other phones, as documented by well-known-leds.txt.
Best regards,
Hi!
> > I'm having some fun with usb host. Good news is it works with
> > externally powered hub... after a while. I get some error messages
> > about inability to go host mode, but with enough patience it
> > eventually does enter host mode and I see my keyboard/mouse.
> >
> > And usually in tha
Hi!
I'm having some fun with usb host. Good news is it works with
externally powered hub... after a while. I get some error messages
about inability to go host mode, but with enough patience it
eventually does enter host mode and I see my keyboard/mouse.
And usually in that process, one of my cpu
Hi!
> Current code blindly writes over the SWERR and the OVERFLOW bits. Write
> back the bits actually read instead so the driver avoids clobbering the
> OVERFLOW bit that comes after the register is read.
I believe this is incorrect. Changelog explains that we need to
preserve bits in the regist
Hi!
> [ Upstream commit a79ace4b312953c5835fafb12adc3cb6878b26bd ]
>
> These patches fix a series of spelling errors in net/tipc module.
This should not be in -stable, it just cleans up comments.
Best regards,
Pavel
Apr 2021 13:05:09 +.
> Anything received after that time might be too late.
CIP testing did not find any problems here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y
Tested-by: Pavel Machek
Hi!
> [ Upstream commit 0c85a7e87465f2d4cbc768e245f4f45b2f299b05 ]
>
> In case of rs failure in rds_send_remove_from_sock(), the 'rm' resource
> is freed and later under spinlock, causing potential use-after-free.
> Set the free pointer to NULL to avoid undefined behavior.
This patch is crazy. T
Hi!
> From: Aditya Pakki
>
> [ Upstream commit 0c85a7e87465f2d4cbc768e245f4f45b2f299b05 ]
>
> In case of rs failure in rds_send_remove_from_sock(), the 'rm' resource
> is freed and later under spinlock, causing potential use-after-free.
> Set the free pointer to NULL to avoid undefined behavior
On Sun 2021-04-18 09:11:43, Sebastian Fricke wrote:
> Hey Joe,
>
> On 18.04.2021 00:09, Joe Perches wrote:
> >On Sun, 2021-04-18 at 06:08 +, Sebastian Fricke wrote:
> >>Remove a redundant space to improve the quality of the comment.
> >
> >I think this patch is not useful.
> >
> >It's not redu
here: (some boards are
unavailable)
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.19.y
Tested-by: Pavel Machek (CIP)
Best regards,
Pavel
here: (some boards
are unavailable)
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.4.y
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.19.y
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y
Tested-by: Pavel
here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.4.y
Tested-by: Pavel Machek (CIP)
Best regards,
Pavel
--
DENX Software Engineering GmbH,
here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y
Tested-by: Pavel Machek (CIP)
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office:
here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.19.y
Tested-by: Pavel Machek (CIP)
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office:
Hi!
> The XT digital calibration feature allows to improve the RTC accuracy,
> using a Distributed Digital Calibration function.
> See ch. 5.9.1 of AB08XX Series Ultra Low Power RTC IC User's Guide
> https://abracon.com/realtimeclock/AB08XX-Application-Manual.pdf
>
> Signed-off-by: Kirill Kaprano
't want that to run with clock being disabled and DMA
being unmapped.
We certainly don't want phy_disconnect() being undone by
phy_connect_direct() running in the workqueue.
IOW this patch is not enough to fix the bugs, and at least fix below
is needed to get something reasonable.
Signed
Hi!
> > Could I get some comments on the gnss patch? It is fairly simple, and
> > I believe it is ready for merge.
>
> Let's get the mux driver in shape first.
Well, gnss driver is now completely independent of that in the new
versions.
> > Here's new version of the serdev multiplexing patch fo
here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.4.y
Tested-by: Pavel Machek (CIP)
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kir
roblems here: (Siemens boards
are unavailable)
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.19.y
Tested-by: Pavel Machek (CIP)
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: W
roblems here: (Siemens boards
are unavailable)
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y
Tested-by: Pavel Machek (CIP)
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: W
Hi!
> > > However, these functions alone don't provide any guarantees at the
> > > system level. Drivers need to ensure that the only a single consumer has
> > > access to the reset at the same time. In order for the SOR to be able to
> > > exclusively access its reset, it must therefore ensure th
sure that the SOR
> power domain is not powered off by holding on to a runtime PM reference
> to that power domain across the reset assert/deassert operation.
Yeah, but it should not leak the PM reference in the error handling.
Signed-off-by: Pavel Mach
Hi!
> From: Nathan Rossi
>
> [ Upstream commit 8a28af7a3e85ddf358f8c41e401a33002f7a9587 ]
>
> The aq_nic_start function can fail in a variety of cases which leaves
> the device in broken state.
>
> An example case where the start function fails is the
> request_threaded_irq which can be interr
);
> }
The switch only takes the lock in 3 branches, but it is released
unconditionally at the end.
Something like this?
Best regards,
Pavel
Signed-off-by: Pavel Machek (CIP)
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tl
Hi!
> From: Marc Kleine-Budde
>
> [ Upstream commit 3e77f70e734584e0ad1038e459ed3fd2400f873a ]
>
> This patch moves the CAN driver related infrastructure into a separate subdir.
> It will be split into more files in the coming patches.
I don't think this is suitable for stable. I don't think a
Hi!
> From: Eric Whitney
> A per filesystem percpu counter exported via sysfs is added to allow
> users or developers to track the number of times the retry limit is
> exceeded without resorting to debugging methods. This should provide
> some insight into worst case retry behavior.
This adds
Hi!
> On Tue, 30 Mar 2021 at 08:43, Hao Fang wrote:
> >
> > s/Hisilicon/HiSilicon/g.
> > It should use capital S, according to
> > https://www.hisilicon.com/en/terms-of-use.
> >
> > Signed-off-by: Hao Fang
> > /*
> > * Copyright (c) 2013 Linaro Ltd.
> > - * Copyright (c) 2013 Hisilicon Limit
here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.4.y
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.19.y
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y
Tested-by: Pavel Machek (CIP)
ny's, bugs are probably Pavel's.
Signed-off-by: Pavel Machek
Co-authored-by: Tony Lindgren
---
v2: Fix compile error.
---
sound/soc/codecs/Kconfig| 8 +
sound/soc/codecs/Makefile | 4 +
sound/soc/codecs/motmdm-state.c | 177
sound/soc/codecs/motmdm.c | 6
On Fri 2021-03-26 16:13:51, Zhang Jianhua wrote:
> If CONFIG_ATH9K=y, the following errors will be seen while compiling
> gpio.c
>
> drivers/net/wireless/ath/ath9k/gpio.o: In function `ath_deinit_leds':
> gpio.c:(.text+0x604): undefined reference to `led_classdev_unregister'
> gpio.c:(.text+0x604)
Hi!
> > > > > - err = ht16k33_brightness_set(priv, MAX_BRIGHTNESS);
> > > > > + of_property_read_u32(node, "color", &color);
> > > > > + seg->led.name = devm_kasprintf(dev, GFP_KERNEL,
> > > > > + DRIVER_NAME ":%s:" LED_FUNCTION_BACKLIGHT,
> > > > > +
Hi!
> Introduce a new multiple GPIOs LED driver. This LED will made of
> multiple GPIOs (up to 8) and will map different brightness to different
> GPIOs states which defined in dts file.
>
> Signed-off-by: Hermes Zhang
> index ..7aef82701f86
> --- /dev/null
> +++ b/drivers/leds/sim
Dan's address bounces, and has been bouncing for some time as he moved
to other projects.
I believe TI should be more careful with this, and should assign
alternate contacts for their drivers.
Anyway what we can do now is to remove the obsolete address.
Signed-off-by: Pavel Machek
---
Hi!
> Add support for RT4505 flash LED controller. It can support up to 1.5A
> flash current with hardware timeout and low input voltage protection.
>
> Signed-off-by: ChiYuan Huang
> Acked-by: Jacek Anaszewski
Thank you, applied and pushed out.
Best regards,
Hi!
> Commit
>
> feac7685def1 ("leds: Kconfig: LEDS_CLASS is usually selected.")
>
> is missing a Signed-off-by from its author and committer.
Thank you, fixed.
Pavel
--
http://www.livejournal.com/~pavelmachek
signature.asc
Hi!
> See below.
Please trim.
> > + led-gpios:
> > +description: Array of one or more GPIOs pins used to control the LED.
> > +minItems: 1
> > +maxItems: 8 # Should be enough
>
> We also have a case with multi color LEDs (which is probably a more common
> than multi intensity LED.
Hi!
> Remove unnecessary Kconfig symbol LEDS_BLINK
> Improve Kconfig help text to make it more useful.
>
> Signed-off-by: Rahul Tanwar
Thanks for the patch, I applied it by hand.
> +++ b/drivers/leds/blink/leds-lgm-sso.c
> @@ -1,8 +1,8 @@
> // SPDX-License-Identifier: GPL-2.0
> /*
> - * Inte
On Thu 2021-03-25 18:19:03, ChiYuan Huang wrote:
> Pavel Machek 於 2021年3月25日 週四 下午6:01寫道:
> >
> > Hi!
> >
> > > > > create mode 100644 drivers/leds/flash/Kconfig
> > > > > create mode 100644 drivers/leds/flash/Makefile
> > &g
Hi!
> > > create mode 100644 drivers/leds/flash/Kconfig
> > > create mode 100644 drivers/leds/flash/Makefile
> > > create mode 100644 drivers/leds/flash/leds-rt4505.c
> >
> > Acked-by: Jacek Anaszewski
> >
> Any problem with this patch? Do I need to submit it again?
It won't apply on curre
here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y
Tested-by: Pavel Machek (CIP)
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office:
Hi!
> > + of_property_read_string(node, "default-state", &state);
> > + if (!strcmp(state, "on"))
> > + multi_gpio_led_set(&priv->cdev, LED_FULL);
> > + else
> > + multi_gpio_led_set(&priv->cdev, LED_OFF);
>
> Again LED_FULL and LED_OFF...
> What about default-state = "k
On Wed 2021-03-24 15:56:30, Hermes Zhang wrote:
> From: Hermes Zhang
>
> Introduce a new multiple GPIOs LED driver. This LED will made of
> multiple GPIOs (up to 8) and will map different brightness to different
> GPIOs states which defined in dts file.
>
> Signed-off-by: Hermes Zhang
> ---
>
Hi!
> > From: Hermes Zhang
> >
> > Introduce a new multiple GPIOs LED driver. This LED will made of
> > multiple GPIOs (up to 8) and will map different brightness to different
> > GPIOs states which defined in dts file.
>
> I wonder how many boards have such LEDs.
>
> Also if it wouldn't be be
On Wed 2021-03-24 06:58:21, Alexander Dahl wrote:
> Hello Hermes,
>
> > Hermes Zhang hat am 24.03.2021 03:48 geschrieben:
> >
> >
> > From: Hermes Zhang
> >
> > Document the device tree bindings of the multiple GPIOs LED driver
> > Documentation/devicetree/bindings/leds/leds-multi-gpio.yaml.
On Fri 2021-03-05 11:52:38, Johan Hovold wrote:
> On Fri, Mar 05, 2021 at 11:46:35AM +0100, Pavel Machek wrote:
> > Hi!
> >
> > > > > For motorola modem case, we may have a GNSS device on channel 4.
> > > > > Let's add that to the binding and
Hi!
> CC linux-leds (which I intended, but forgot to add)
>
> cover letter at
> https://lore.kernel.org/linux-devicetree/20210322144848.1065067-1-ge...@linux-m68k.org/
Still does not tell me... riscv on fpga with 4 character display. What
is this? :-).
> On Tue, Mar 23, 2021 at 11:08 AM Robin
Hi!
> > index e201b4b1655a..46704c341b17 100644
> > --- a/arch/arc/include/asm/cacheflush.h
> > +++ b/arch/arc/include/asm/cacheflush.h
> > @@ -112,6 +112,6 @@ do {
> > \
> > } while (0)
> >
> > #define copy_from_user_page(vma,
Hi!
> > > (a) the traditional include guard optimization HAS NO HIDDEN SEMANTIC
> > > MEANING. It's a pure optimization that doesn't actually change
> > > anything else. If you don't do the optimization, absolutely nothing
> > > changes.
> >
> > And if the parser is well written the optimisation
here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.4.y
Tested-by: Pavel Machek (CIP)
Best regards,
Pavel
--
DENX Software Engineering GmbH,
here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.19.y
Tested-by: Pavel Machek (CIP)
Best regards,
Pavel
--
DENX Software Engi
here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y
Tested-by: Pavel Machek (CIP)
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office:
Hi!
> > First try was on x86-32. It took me a whlie to figure out the problem,
> > hence the diff below.
>
> Thanks a lot for trying it out and for the feedback! :-)
Thanks for your work :-).
> The supported architectures are in
> Documentation/rust/arch-support.rst, so we should link to that.
Hi!
First try was on x86-32. It took me a whlie to figure out the problem,
hence the diff below.
Next I was not sure what to do with rustup. I'm not sure if advice
below is good.
Then I got failure because libclang (?) was not installed. I installed
it. But I guess that should be mentioned in do
Not everyone knows what vDPA stands for, explain it in Kconfig.
Signed-off-by: Pavel Machek (CIP)
diff --git a/drivers/vdpa/Kconfig b/drivers/vdpa/Kconfig
index ffd1e098bfd2..8cb37b3dd279 100644
--- a/drivers/vdpa/Kconfig
+++ b/drivers/vdpa/Kconfig
@@ -3,9 +3,9 @@ menuconfig VDPA
dev_get_mac_address() does not always initialize whole
structure. Unfortunately, other code copies such structure to
userspace, leaking information. Fix it.
Signed-off-by: Pavel Machek (CIP)
Cc: sta...@kernel.org
diff --git a/net/core/dev.c b/net/core/dev.c
index 6c5967e80132..28283a9eb63a
Not everyone knows what vDPA stands for, explain it in Kconfig.
Signed-off-by: Pavel Machek (CIP)
diff --git a/drivers/vdpa/Kconfig b/drivers/vdpa/Kconfig
index ffd1e098bfd2..8cb37b3dd279 100644
--- a/drivers/vdpa/Kconfig
+++ b/drivers/vdpa/Kconfig
@@ -3,9 +3,9 @@ menuconfig VDPA
Bitfield manipulation in enetc_mac_config() looks wrong. Fix
it. Untested.
Signed-off-by: Pavel Machek (CIP)
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
index 224fc37a6757..b85079493933 100644
--- a/drivers/net/ethernet
Hi!
> > I assume this is just to install a trojan horse when opening the
> > attached zip (also I assume most of you will work on linux and it
> > might not be a Problem for you anyhow ;-) .
> >
> > Virus total reports a Trojan horse, but only for with 2 out of 61
> > virus scan engines (and I
here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y
Tested-by: Pavel Machek (CIP)
Best regards,
Pavel
--
DENX Software Engineering GmbH,
here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.19.y
Tested-by: Pavel Machek (CIP)
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office:
On Fri 2021-03-19 17:44:32, Rafael J. Wysocki wrote:
> On Sat, Mar 13, 2021 at 11:27 AM Pavel Machek wrote:
> >
> > On Fri 2021-03-12 11:24:30, chris.c...@canonical.com wrote:
> > > From: Chris Chiu
> > >
> > > The .callback of the quirk for Sony VPCEH3U
Hi!
> > > help
> > > - Parallel to serial conversion, which is also called SSO
> > > controller,
> > > - can drive external shift register for LED outputs.
> > > - This enables LED support for Serial Shift Output controller(SSO).
> > > + This option enables support for LEDs connected to GPI
rving just IFMODE bits, then ors the IFMODE bits with new values.
I believe this is needed:
Signed-off-by: Pavel Machek (CIP)
Pavel
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
b/drivers/net/ethernet/freescal
Hi!
> Remove unnecessary Kconfig symbol LEDS_BLINK
> Improve Kconfig help text to make it more useful.
>
> Signed-off-by: Rahul Tanwar
> +++ b/drivers/leds/blink/Kconfig
> @@ -1,21 +1,19 @@
> -menuconfig LEDS_BLINK
> - bool "LED Blink support"
> - depends on LEDS_CLASS
> - hel
On Tue 2021-03-16 16:34:50, Geert Uytterhoeven wrote:
> Hi Tianling,
>
> CC Jacek, Pavel
>
> On Tue, Mar 16, 2021 at 4:00 PM Tianling Shen wrote:
> > On 2021-03-16 02:23 Geert Uytterhoeven wrote:
> > > Personally, I'm not so fond of the -%u node names, and prefer
> > > -. With the former, it's
Hi!
> From: Greg Kroah-Hartman
>
> From: Bjorn Helgaas
Dup.
> Remove the bandwidth change notifications for now. Hopefully we can add
> this back when we have a better understanding of why this happens and how
> we can make the messages useful instead of overwhelming.
This is stable, and ev
Hi!
> > From: Greg Kroah-Hartman
> >
> > From: Eric Dumazet
>
> Dup.
Aha, sorry, crossed mails. Still I wonder if hiding assignment into
macro is good:
> > --- a/net/ipv4/tcp_minisocks.c
> > +++ b/net/ipv4/tcp_minisocks.c
> > @@ -510,7 +510,7 @@ struct sock *tcp_create_openreq_child(co
> >
Hi!
> From: Greg Kroah-Hartman
>
> From: Eric Dumazet
Dup.
> We need to add READ_ONCE() annotations, and also make
> sure write sides use corresponding WRITE_ONCE() to avoid
> store-tearing.
> @@ -1037,7 +1037,7 @@ new_segment:
> sk->sk_wmem_queued += copy;
> sk_
Hi!
> From: Greg Kroah-Hartman
>
> From: Eric Dumazet
Two From: fields here.
> [ Upstream commit 7db48e983930285b765743ebd665aecf9850582b ]
>
> There are few places where we fetch tp->copied_seq while
> this field can change from IRQ or other cpu.
And there are few such places even after th
roblems here: (Renesas boards
are still unavailable)
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y
Tested-by: Pavel Machek (CIP)
Best regards,
roblems here: (Renesas boards
are still unavailable)
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.4.y
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.19.y
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y
Test
here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.4.y
Tested-by: Pavel Machek (CIP)
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office:
Hi!
> > I would also be happy to include a fix to that script. My suggestion
> > would be to allow bus=platform, in which case a "devicename" will be
> > required and is allowed to have any value.
>
> Furthermore it might be good to catch that in the led core instead of
> that script. Maybe warn(
Hi!
> Maybe you explain the idea behind choosing only from that namespace? My
> guess would be high-level software being able to toggle leds totally
> indep of the device it runs on. Such software would have to do some
> really nasty directory listing, name parsing, dealing with multiple
> hits. D
> > + struct led_classdev cdev;
> > +};
> > +
> > +static struct simatic_ipc_led simatic_ipc_leds_io[] = {
> > + {1 << 15, "simatic-ipc:green:" LED_FUNCTION_STATUS "-1" },
> > + {1 << 7, "simatic-ipc:yellow:" LED_FUNCTION_STATUS "-1" },
> > + {1 << 14, "simatic-ipc:red:" L
1 - 100 of 5912 matches
Mail list logo