00 mV
Fixes: db4a555f7c4c ("regulator: axp20x: use defines for masks")
Signed-off-by: Rask Ingemann Lambertsen
---
drivers/regulator/axp20x-regulator.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/regulator/axp20x-regulator.c
b/drivers/regulator/ax
hunk above should go with your patch
"[RFC PATCH 9/9] ARM: suniv: f1c100s: add device tree for Lichee Pi Nano"
instead.
--
Rask Ingemann Lambertsen
hunk above should go with your patch
"[RFC PATCH 9/9] ARM: suniv: f1c100s: add device tree for Lichee Pi Nano"
instead.
--
Rask Ingemann Lambertsen
of the stack overflow.
As a side effect of this rewrite, you no longer get a space added in front
of the kernel command line when no bootargs property was found in the FDT.
Signed-off-by: Rask Ingemann Lambertsen <r...@formelder.dk>
Tested-by: Pavel Machek <pa...@ucw.cz>
Tested-by: Sebas
of the stack overflow.
As a side effect of this rewrite, you no longer get a space added in front
of the kernel command line when no bootargs property was found in the FDT.
Signed-off-by: Rask Ingemann Lambertsen
Tested-by: Pavel Machek
Tested-by: Sebastian Reichel
Fixes: d0f34a11ddab ("ARM: 7
On Tue, Jul 18, 2017 at 09:39:10AM +0200, Richard Genoud wrote:
> On 16/07/2017 23:43, Rask Ingemann Lambertsen wrote:
[snip]
> > +/* This is called early on from head.S, so it can't use much stack. */
> > +static void merge_fdt_bootargs(void *fdt, const char *atag_cmdline)
>
On Tue, Jul 18, 2017 at 09:39:10AM +0200, Richard Genoud wrote:
> On 16/07/2017 23:43, Rask Ingemann Lambertsen wrote:
[snip]
> > +/* This is called early on from head.S, so it can't use much stack. */
> > +static void merge_fdt_bootargs(void *fdt, const char *atag_cmdline)
>
of the stack overflow.
As a side effect of this rewrite, you no longer get a space added in front
of the kernel command line when no bootargs property was found in the fdt.
Signed-off-by: Rask Ingemann Lambertsen <r...@formelder.dk>
Fixes: d0f34a11ddab ("ARM: 7437/1: zImage: Allow DTB c
of the stack overflow.
As a side effect of this rewrite, you no longer get a space added in front
of the kernel command line when no bootargs property was found in the fdt.
Signed-off-by: Rask Ingemann Lambertsen
Fixes: d0f34a11ddab ("ARM: 7437/1: zImage: Allow DTB command line concaten
e peripherals that we support so far.
>
> Signed-off-by: Andre Przywara <andre.przyw...@arm.com>
> [Icenowy: dropped all GPIO pinctrl nodes, change red LED gpio,
> change MMC cd to active-low, rename some node names to prevent
> underscores]
> Signed-off-by: I
so far.
>
> Signed-off-by: Andre Przywara
> [Icenowy: dropped all GPIO pinctrl nodes, change red LED gpio,
> change MMC cd to active-low, rename some node names to prevent
> underscores]
> Signed-off-by: Icenowy Zheng
Reviewed-by: Rask Ingemann Lambertsen
> diff --git
device tree
s/Trasitional/Transitional/ I guess.
> files which included sun8i-h3-ccu.h can compile.
>
> Signed-off-by: Icenowy Zheng <icen...@aosc.xyz>
> ---
> Changes in v5:
> - Add the reason to create trasitional headers in commit message.
Likewise.
--
Rask Ingemann Lambertsen
device tree
s/Trasitional/Transitional/ I guess.
> files which included sun8i-h3-ccu.h can compile.
>
> Signed-off-by: Icenowy Zheng
> ---
> Changes in v5:
> - Add the reason to create trasitional headers in commit message.
Likewise.
--
Rask Ingemann Lambertsen
= < 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
> + cd-inverted;
You should be able to simplify those last two lines to just
cd-gpios = < 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
(see the paragraph which begins with "*NOTE* on CD and WP polarity."
in 'Documentation/devicetree/bindings/mmc/mmc.txt'.)
--
Rask Ingemann Lambertsen
= < 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
> + cd-inverted;
You should be able to simplify those last two lines to just
cd-gpios = < 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
(see the paragraph which begins with "*NOTE* on CD and WP polarity."
in 'Documentation/devicetree/bindings/mmc/mmc.txt'.)
--
Rask Ingemann Lambertsen
/dev/null
> +++ b/arch/arm64/boot/dts/allwinner/sunxi-h3-h5.dtsi
> @@ -0,0 +1 @@
> +../../../../arm/boot/dts/sunxi-h3-h5.dtsi
> \ No newline at end of file
But it's missing more than just a newline, isn't it? Shouldn't it read
#include <../../../../arm/boot/dts/sunxi-h3-h5.dtsi>
?
--
Rask Ingemann Lambertsen
h5.dtsi
> @@ -0,0 +1 @@
> +../../../../arm/boot/dts/sunxi-h3-h5.dtsi
> \ No newline at end of file
But it's missing more than just a newline, isn't it? Shouldn't it read
#include <../../../../arm/boot/dts/sunxi-h3-h5.dtsi>
?
--
Rask Ingemann Lambertsen
+ cd-inverted;
You ought to be able to replace those last two lines with just
cd-gpios = < 5 6 GPIO_ACTIVE_LOW>;
> + disable-wp;
> + bus-width = <4>;
> + status = "okay";
> +};
--
Rask Ingemann Lambertsen
+ cd-inverted;
You ought to be able to replace those last two lines with just
cd-gpios = < 5 6 GPIO_ACTIVE_LOW>;
> + disable-wp;
> + bus-width = <4>;
> + status = "okay";
> +};
--
Rask Ingemann Lambertsen
in master
mode. This patch lets the driver use the new device tree property
"xpowers,master-mode" to set the correct operating mode for the board.
Fixes: 8824ee857348 ("mfd: axp20x: Add support for AXP806 PMIC")
Signed-off-by: Rask Ingemann Lambertsen <r...@formelder.dk>
in master
mode. This patch lets the driver use the new device tree property
"xpowers,master-mode" to set the correct operating mode for the board.
Fixes: 8824ee857348 ("mfd: axp20x: Add support for AXP806 PMIC")
Signed-off-by: Rask Ingemann Lambertsen
---
Changes from v1 to
in master
mode. To let the device tree describe which mode of operation is needed,
this patch introduces a new property "xpowers,master-mode".
Fixes: 204ae2963e10 ("mfd: axp20x: Add bindings for AXP806 PMIC")
Signed-off-by: Rask Ingemann Lambertsen <r...@formelder.dk>
A
in master
mode. To let the device tree describe which mode of operation is needed,
this patch introduces a new property "xpowers,master-mode".
Fixes: 204ae2963e10 ("mfd: axp20x: Add bindings for AXP806 PMIC")
Signed-off-by: Rask Ingemann Lambertsen
Acked-by: Chen-Yu Tsai
---
ince kernel
4.9 when the AXP806 support was added.
Patch 1 adds the "xpowers,master-mode" property to the AXP806 binding.
Patch 2 adds support for it to the axp20x driver.
Rask Ingemann Lambertsen (2):
dts: mfd: axp20x: Add "xpowers,master-mode" property for AXP806 PMICs
m
ince kernel
4.9 when the AXP806 support was added.
Patch 1 adds the "xpowers,master-mode" property to the AXP806 binding.
Patch 2 adds support for it to the axp20x driver.
Rask Ingemann Lambertsen (2):
dts: mfd: axp20x: Add "xpowers,master-mode" property for AXP806 PMICs
m
On Thu, Feb 16, 2017 at 07:29:57PM +0100, Maxime Ripard wrote:
> On Thu, Feb 16, 2017 at 07:17:54AM +0100, Rask Ingemann Lambertsen wrote:
> > > > Supported features (+ means tested):
[...]
> > > > + SATA port on on-board SATA-to-USB bridge *
[...]
> > >
On Thu, Feb 16, 2017 at 07:29:57PM +0100, Maxime Ripard wrote:
> On Thu, Feb 16, 2017 at 07:17:54AM +0100, Rask Ingemann Lambertsen wrote:
> > > > Supported features (+ means tested):
[...]
> > > > + SATA port on on-board SATA-to-USB bridge *
[...]
> > >
in master
mode. This patch lets the driver use the new device tree property
"xpowers,master-mode" to set the correct operating mode for the board.
Fixes: b101829a029a ("mfd: axp20x: Fix AXP806 access errors on cold boot")
Signed-off-by: Rask Ingemann Lambertsen <r...@formelder.d
in master
mode. This patch lets the driver use the new device tree property
"xpowers,master-mode" to set the correct operating mode for the board.
Fixes: b101829a029a ("mfd: axp20x: Fix AXP806 access errors on cold boot")
Signed-off-by: Rask Ingemann Lambertsen
in master
mode. To let the device tree describe which mode of operation is needed,
this patch introduces a new property "xpowers,master-mode".
Fixes: b101829a029a ("mfd: axp20x: Fix AXP806 access errors on cold boot")
Signed-off-by: Rask Ingemann Lambertsen <r...@formelder.
in master
mode. To let the device tree describe which mode of operation is needed,
this patch introduces a new property "xpowers,master-mode".
Fixes: b101829a029a ("mfd: axp20x: Fix AXP806 access errors on cold boot")
Signed-off-by: Rask Ingemann Lambertsen
---
Documentation/devi
ince kernel
4.9 when the AXP806 support was added.
Patch 1 adds the "xpowers,master-mode" property to the AXP806 binding.
Patch 2 adds support for it to the axp20x driver.
Rask Ingemann Lambertsen (2):
dts: mfd: axp20x: Add xpowers,master-mode property for AXP806 PMICs
mfd: axp20x
ince kernel
4.9 when the AXP806 support was added.
Patch 1 adds the "xpowers,master-mode" property to the AXP806 binding.
Patch 2 adds support for it to the axp20x driver.
Rask Ingemann Lambertsen (2):
dts: mfd: axp20x: Add xpowers,master-mode property for AXP806 PMICs
mfd: axp20x
uot;
"2.1 High Level View
---
The most important thing to understand is that the DT is simply a data
structure that describes the hardware."
--
Rask Ingemann Lambertsen
uot;
"2.1 High Level View
---
The most important thing to understand is that the DT is simply a data
structure that describes the hardware."
--
Rask Ingemann Lambertsen
On Fri, Feb 17, 2017 at 11:08:59AM +0800, Chen-Yu Tsai wrote:
> On Fri, Feb 17, 2017 at 5:16 AM, Rask Ingemann Lambertsen
> <r...@formelder.dk> wrote:
> > In summary: I'll propose a new property "extended-address" or so to the
> > existing "x-powers,axp806&qu
On Fri, Feb 17, 2017 at 11:08:59AM +0800, Chen-Yu Tsai wrote:
> On Fri, Feb 17, 2017 at 5:16 AM, Rask Ingemann Lambertsen
> wrote:
> > In summary: I'll propose a new property "extended-address" or so to the
> > existing "x-powers,axp806" compatible
ting unconditionally
to 0xff. A new "x-powers,axp808" compatible and new AXP808_ID is therefore
not needed. This should make for a simpler and smaller patch.
On Wed, Feb 15, 2017 at 12:35:39AM +0100, Rask Ingemann Lambertsen wrote:
> As to touching the register at 0xff, it would be int
ting unconditionally
to 0xff. A new "x-powers,axp808" compatible and new AXP808_ID is therefore
not needed. This should make for a simpler and smaller patch.
On Wed, Feb 15, 2017 at 12:35:39AM +0100, Rask Ingemann Lambertsen wrote:
> As to touching the register at 0xff, it would be int
On Fri, Feb 10, 2017 at 09:59:20AM +0100, Maxime Ripard wrote:
> Hi,
>
> On Thu, Feb 09, 2017 at 12:34:06AM +0100, Rask Ingemann Lambertsen wrote:
> > The Suncip CX-A99 board is found in at least four brands of media players.
> > It features an Allwinner A80 ARM SoC and i
On Fri, Feb 10, 2017 at 09:59:20AM +0100, Maxime Ripard wrote:
> Hi,
>
> On Thu, Feb 09, 2017 at 12:34:06AM +0100, Rask Ingemann Lambertsen wrote:
> > The Suncip CX-A99 board is found in at least four brands of media players.
> > It features an Allwinner A80 ARM SoC and i
On Fri, Feb 10, 2017 at 05:22:21PM +0800, Chen-Yu Tsai wrote:
> On Fri, Feb 10, 2017 at 4:59 PM, Maxime Ripard
> <maxime.rip...@free-electrons.com> wrote:
> > Hi,
> >
> > On Thu, Feb 09, 2017 at 12:34:06AM +0100, Rask Ingemann Lambertsen wrote:
[...]
> >> d
On Fri, Feb 10, 2017 at 05:22:21PM +0800, Chen-Yu Tsai wrote:
> On Fri, Feb 10, 2017 at 4:59 PM, Maxime Ripard
> wrote:
> > Hi,
> >
> > On Thu, Feb 09, 2017 at 12:34:06AM +0100, Rask Ingemann Lambertsen wrote:
[...]
> >> diff --git a/arch/arm/boot/dts/sun9i-a80
> > On Thu, Feb 09, 2017 at 12:34:06AM +0100, Rask Ingemann Lambertsen wrote:
[...]
> >> + /* 1.8 V (enabled). */
> >> + reg_aldo2: aldo2 {
> >> + regulator-boot-on;
> >>
tter... One can figure out the LEDs are connected to the
> PL group and maybe realize they are powered this way. Not that easy the other
> way around.
The LEDs are controlled by PG10 and PG11 but get their power from cldo1,
which is connected to the (common) anode of the red and blue LED. Cldo1 also
supplies the SoCs "VCC-PL", which powers pin group L that controls the USB
2.0 Vbus and vdd-cpub regulators. Pin group L has nothing to do with the
LEDs. Thus I think the regulator name is appropriate in this case.
--
Rask Ingemann Lambertsen
or support.
Signed-off-by: Rask Ingemann Lambertsen <r...@formelder.dk>
Acked-by: Chen-Yu Tsai <w...@csie.org>
---
Changes in v2:
- Noted in the commit message that another commit for better AXP806 support
means the driver no longer works with an AXP808.
- axp808_writeable_table was cha
or support.
Signed-off-by: Rask Ingemann Lambertsen
Acked-by: Chen-Yu Tsai
---
Changes in v2:
- Noted in the commit message that another commit for better AXP806 support
means the driver no longer works with an AXP808.
- axp808_writeable_table was changed to use the common part (between AXP806 an
The regulators are the same as on the AXP806.
Signed-off-by: Rask Ingemann Lambertsen <r...@formelder.dk>
Acked-by: Mark Brown <broo...@kernel.org>
Acked-by: Chen-Yu Tsai <w...@csie.org>
---
No changes in v2.
drivers/regulator/axp20x-regulator.c | 7 +--
1 file changed,
The regulators are the same as on the AXP806.
Signed-off-by: Rask Ingemann Lambertsen
Acked-by: Mark Brown
Acked-by: Chen-Yu Tsai
---
No changes in v2.
drivers/regulator/axp20x-regulator.c | 7 +--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/regulator/axp20x
audio output
- Jack socket with composite video and analog stereo audio
- Bluetooth
- FM radio receiver (assuming it is even wired on the board)
Signed-off-by: Rask Ingemann Lambertsen <r...@formelder.dk>
---
Changes in v6:
- Updated commit message description of SATA-to-USB bridge quirk and
put
- Jack socket with composite video and analog stereo audio
- Bluetooth
- FM radio receiver (assuming it is even wired on the board)
Signed-off-by: Rask Ingemann Lambertsen
---
Changes in v6:
- Updated commit message description of SATA-to-USB bridge quirk and added
note about experimenta
The AXP808 does not support address space extension, but is otherwise
identical to the AXP806, including the chip ID, so add a compatible
string for it to the binding.
Signed-off-by: Rask Ingemann Lambertsen <r...@formelder.dk>
Acked-by: Rob Herring <r...@kernel.org>
Acked-by: Che
The AXP808 does not support address space extension, but is otherwise
identical to the AXP806, including the chip ID, so add a compatible
string for it to the binding.
Signed-off-by: Rask Ingemann Lambertsen
Acked-by: Rob Herring
Acked-by: Chen-Yu Tsai
---
No changes in v2.
Documentation
An entry for the AXP806 was forgotten, so add one.
Fixes: 204ae2963e10 ("mfd: axp20x: Add bindings for AXP806 PMIC")
Signed-off-by: Rask Ingemann Lambertsen <r...@formelder.dk>
Acked-by: Chen-Yu Tsai <w...@csie.org>
Acked-by: Rob Herring <r...@kernel.org>
---
No ch
An entry for the AXP806 was forgotten, so add one.
Fixes: 204ae2963e10 ("mfd: axp20x: Add bindings for AXP806 PMIC")
Signed-off-by: Rask Ingemann Lambertsen
Acked-by: Chen-Yu Tsai
Acked-by: Rob Herring
---
No changes in v2.
Documentation/devicetree/bindings/mfd/axp20x.txt | 1
kernel.org/patch/9530319/
Rask Ingemann Lambertsen (5):
dts: mfd: axp20x: Add AXP806 to list of current AXP20x family members
dts: mfd: axp20x: Add binding for the AXP808
mfd: axp20x: Add support for the AXP808 PMIC
regulator: axp20x: Add support for the AXP808 PMIC
ARM: dts: sun9i: Initi
kernel.org/patch/9530319/
Rask Ingemann Lambertsen (5):
dts: mfd: axp20x: Add AXP806 to list of current AXP20x family members
dts: mfd: axp20x: Add binding for the AXP808
mfd: axp20x: Add support for the AXP808 PMIC
regulator: axp20x: Add support for the AXP808 PMIC
ARM: dts: sun9i: Initi
The sunxi RSB bus is used for peripherals like voltage regulators and
real-time clocks which should be available early in the boot process.
As a module, the driver will not be available until the root fs has been
mounted, so build the driver into the kernel.
Signed-off-by: Rask Ingemann
The sunxi RSB bus is used for peripherals like voltage regulators and
real-time clocks which should be available early in the boot process.
As a module, the driver will not be available until the root fs has been
mounted, so build the driver into the kernel.
Signed-off-by: Rask Ingemann
Enable the AC100 RTC driver so boards with it can keep track of time.
Signed-off-by: Rask Ingemann Lambertsen <r...@formelder.dk>
---
This patch will have no effect if patch 2/4 is not applied.
arch/arm/configs/multi_v7_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/ar
Enable the AC100 RTC driver so boards with it can keep track of time.
Signed-off-by: Rask Ingemann Lambertsen
---
This patch will have no effect if patch 2/4 is not applied.
arch/arm/configs/multi_v7_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/configs
The AXP20X regulator support is currently built as a module, which means
it's not available until the root fs has been mounted, but the boot loader
might not have enabled the required regulators, so build their drivers
into the kernel.
Signed-off-by: Rask Ingemann Lambertsen <r...@formelder
The AXP20X regulator support is currently built as a module, which means
it's not available until the root fs has been mounted, but the boot loader
might not have enabled the required regulators, so build their drivers
into the kernel.
Signed-off-by: Rask Ingemann Lambertsen
---
This patch
Enable the AC100 RTC driver so boards with it can keep track of time.
Signed-off-by: Rask Ingemann Lambertsen <r...@formelder.dk>
Acked-by: Chen-Yu Tsai <w...@csie.org>
---
arch/arm/configs/sunxi_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/configs/sunxi
Enable the AC100 RTC driver so boards with it can keep track of time.
Signed-off-by: Rask Ingemann Lambertsen
Acked-by: Chen-Yu Tsai
---
arch/arm/configs/sunxi_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig
On Mon, Feb 06, 2017 at 11:29:07AM +0800, Chen-Yu Tsai wrote:
> On Mon, Feb 6, 2017 at 5:33 AM, Rask Ingemann Lambertsen
> <r...@formelder.dk> wrote:
> > >8
> > Subject: [PATCH] ARM: sunxi_defconfig: Enable AC100 RTC driver
&
On Mon, Feb 06, 2017 at 11:29:07AM +0800, Chen-Yu Tsai wrote:
> On Mon, Feb 6, 2017 at 5:33 AM, Rask Ingemann Lambertsen
> wrote:
> > >8
> > Subject: [PATCH] ARM: sunxi_defconfig: Enable AC100 RTC driver
> >
> > Enab
s well?
>8
Subject: [PATCH] ARM: sunxi_defconfig: Enable AC100 RTC driver
Enable the AC100 RTC driver so boards with it can keep track of time.
Signed-off-by: Rask Ingemann Lambertsen <r...@formelder.dk>
---
arch/arm/configs/sunxi_defconfig | 2 ++
1 file change
s well?
>8
Subject: [PATCH] ARM: sunxi_defconfig: Enable AC100 RTC driver
Enable the AC100 RTC driver so boards with it can keep track of time.
Signed-off-by: Rask Ingemann Lambertsen
---
arch/arm/configs/sunxi_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --g
On Thu, Feb 02, 2017 at 03:36:41PM +0800, Chen-Yu Tsai wrote:
> Hi,
>
> On Fri, Jan 27, 2017 at 5:27 AM, Rask Ingemann Lambertsen
> <r...@formelder.dk> wrote:
[...]
> > diff --git a/arch/arm/boot/dts/sun9i-a80-cx-a99.dts
> > b/arch/arm/boot/dts/sun9i-a80-cx-a9
On Thu, Feb 02, 2017 at 03:36:41PM +0800, Chen-Yu Tsai wrote:
> Hi,
>
> On Fri, Jan 27, 2017 at 5:27 AM, Rask Ingemann Lambertsen
> wrote:
[...]
> > diff --git a/arch/arm/boot/dts/sun9i-a80-cx-a99.dts
> > b/arch/arm/boot/dts/sun9i-a80-cx-a99.dts
> > new file
On Thu, Feb 02, 2017 at 03:23:33PM +0800, Chen-Yu Tsai wrote:
> On Fri, Jan 27, 2017 at 5:25 AM, Rask Ingemann Lambertsen
> <r...@formelder.dk> wrote:
[...]
> > diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
> > index 25115fe..2d3383e 100644
> > --- a/
On Thu, Feb 02, 2017 at 03:23:33PM +0800, Chen-Yu Tsai wrote:
> On Fri, Jan 27, 2017 at 5:25 AM, Rask Ingemann Lambertsen
> wrote:
[...]
> > diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
> > index 25115fe..2d3383e 100644
> > --- a/drivers/mfd/axp20x.c
> &
Please Cc: linux-arm-ker...@lists.infradead.org on replies as I accidentally
left it out when mailing out this series. I have sent a copy with identical
message-ids to linux-arm-ker...@lists.infradead.org, so replies should be
threaded properly.
--
Rask Ingemann Lambertsen
Please Cc: linux-arm-ker...@lists.infradead.org on replies as I accidentally
left it out when mailing out this series. I have sent a copy with identical
message-ids to linux-arm-ker...@lists.infradead.org, so replies should be
threaded properly.
--
Rask Ingemann Lambertsen
ceiver (assuming it is even wired on the board)
Signed-off-by: Rask Ingemann Lambertsen <r...@formelder.dk>
---
Changes in v5:
- Switched pinmux modes to generic properties and dropped
#include as a consequence.
- Dropped pinctrl properties from GPIO nodes and dropped the pinmux
no
ver (assuming it is even wired on the board)
Signed-off-by: Rask Ingemann Lambertsen
---
Changes in v5:
- Switched pinmux modes to generic properties and dropped
#include as a consequence.
- Dropped pinctrl properties from GPIO nodes and dropped the pinmux
nodes for them.
- AXP808 regulators ad
.org/patch/9530319/
Rask Ingemann Lambertsen (5):
DT: mfd: axp20x: Add AXP806 to list of current AXP20x family members
DT: mfd: axp20x: Add binding for the AXP808
mfd: axp20x: Add support for the AXP808 PMIC
regulator: axp20x: Add support for the AXP808 PMIC
ARM: dts: sun9i: Initi
.org/patch/9530319/
Rask Ingemann Lambertsen (5):
DT: mfd: axp20x: Add AXP806 to list of current AXP20x family members
DT: mfd: axp20x: Add binding for the AXP808
mfd: axp20x: Add support for the AXP808 PMIC
regulator: axp20x: Add support for the AXP808 PMIC
ARM: dts: sun9i: Initi
The regulators are the same as on the AXP806.
Signed-off-by: Rask Ingemann Lambertsen <r...@formelder.dk>
---
drivers/regulator/axp20x-regulator.c | 7 +--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/regulator/axp20x-regulator.c
b/drivers/regulator/
The regulators are the same as on the AXP806.
Signed-off-by: Rask Ingemann Lambertsen
---
drivers/regulator/axp20x-regulator.c | 7 +--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/regulator/axp20x-regulator.c
b/drivers/regulator/axp20x-regulator.c
index a3ade9e
for the interrupts on the AXP808 and enables
the regulator sub-device. The next patch in the series adds the actual
regulator support.
Signed-off-by: Rask Ingemann Lambertsen <r...@formelder.dk>
---
drivers/mfd/axp20x-rsb.c | 1 +
drivers/mfd/axp20x.c
for the interrupts on the AXP808 and enables
the regulator sub-device. The next patch in the series adds the actual
regulator support.
Signed-off-by: Rask Ingemann Lambertsen
---
drivers/mfd/axp20x-rsb.c | 1 +
drivers/mfd/axp20x.c | 28
include/linux/mfd
The AXP808 does not support address space extension, but is otherwise
identical to the AXP806, including the chip ID, so add a compatible
string for it to the binding.
Signed-off-by: Rask Ingemann Lambertsen <r...@formelder.dk>
---
Documentation/devicetree/bindings/mfd/axp20x.txt | 7
The AXP808 does not support address space extension, but is otherwise
identical to the AXP806, including the chip ID, so add a compatible
string for it to the binding.
Signed-off-by: Rask Ingemann Lambertsen
---
Documentation/devicetree/bindings/mfd/axp20x.txt | 7 ---
1 file changed, 4
An entry for the AXP806 was forgotten, so add one.
Signed-off-by: Rask Ingemann Lambertsen <r...@formelder.dk>
Fixes: 204ae2963e10 ("mfd: axp20x: Add bindings for AXP806 PMIC")
---
Documentation/devicetree/bindings/mfd/axp20x.txt | 1 +
1 file changed, 1 insertion(+)
diff --git
An entry for the AXP806 was forgotten, so add one.
Signed-off-by: Rask Ingemann Lambertsen
Fixes: 204ae2963e10 ("mfd: axp20x: Add bindings for AXP806 PMIC")
---
Documentation/devicetree/bindings/mfd/axp20x.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetre
Card insertion and removal currently goes undetected. AFAIK there's no
way to generate interrupts on card changes in this slot, so use polling.
Signed-off-by: Rask Ingemann Lambertsen <r...@formelder.dk>
---
arch/arm/boot/dts/tegra20-trimslice.dts | 1 +
1 file changed, 1 insertion(+)
Card insertion and removal currently goes undetected. AFAIK there's no
way to generate interrupts on card changes in this slot, so use polling.
Signed-off-by: Rask Ingemann Lambertsen
---
arch/arm/boot/dts/tegra20-trimslice.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot
A typo or copy-paste bug means that the register access intended for
regulator dcdce goes to dcdcb instead. This patch corrects it.
Signed-off-by: Rask Ingemann Lambertsen <r...@formelder.dk>
Fixes: 2ca342d391e3 (regulator: axp20x: Support AXP806 variant)
---
I have a board where dcdcb
A typo or copy-paste bug means that the register access intended for
regulator dcdce goes to dcdcb instead. This patch corrects it.
Signed-off-by: Rask Ingemann Lambertsen
Fixes: 2ca342d391e3 (regulator: axp20x: Support AXP806 variant)
---
I have a board where dcdcb powers the DRAM, which I
pins = "PF6";
> > + function = "gpio_in";
> > + bias-pull-up;
> > + };
>
> We are starting to drop pinmux nodes for gpio usage.
How do we get the equivalent of bias-pull-up/down and drive-strength if we
run across a pin that needs it?
--
Rask Ingemann Lambertsen
function = "gpio_in";
> > + bias-pull-up;
> > + };
>
> We are starting to drop pinmux nodes for gpio usage.
How do we get the equivalent of bias-pull-up/down and drive-strength if we
run across a pin that needs it?
--
Rask Ingemann Lambertsen
On Thu, Dec 15, 2016 at 12:57:10AM +0100, Alexandre Belloni wrote:
> The license test has been mangled at some point then copy pasted across
s/test/text/
--
Rask Ingemann Lambertsen
On Thu, Dec 15, 2016 at 12:57:10AM +0100, Alexandre Belloni wrote:
> The license test has been mangled at some point then copy pasted across
s/test/text/
--
Rask Ingemann Lambertsen
ng a
new file here, please use hyphens instead.
[1] https://www.mail-archive.com/linux-kernel%40vger.kernel.org/msg1122967.html
[2] https://www.mail-archive.com/linux-kernel%40vger.kernel.org/msg1145633.html
--
Rask Ingemann Lambertsen
e0 {
> + be0: display-backend@01e6 {
Underscores should not be used in node names. [1][2] Since you're adding a
new file here, please use hyphens instead.
[1] https://www.mail-archive.com/linux-kernel%40vger.kernel.org/msg1122967.html
[2] https://www.mail-archive.com/linux-kernel%40vger.kernel.org/msg1145633.html
--
Rask Ingemann Lambertsen
On Mon, Sep 05, 2016 at 02:31:47PM +1000, James Pettigrew wrote:
> The NanoPi NEO is a minimal H3 based SBC. It comes with 256/512M RAM, a
> micro SD slot, 10/100Mbit ethernet and a single USB-A port.
>
> Signed-off-by: James Pettigrew <ja...@innovum.com.au>
Reviewed-by: Rask I
On Mon, Sep 05, 2016 at 02:31:47PM +1000, James Pettigrew wrote:
> The NanoPi NEO is a minimal H3 based SBC. It comes with 256/512M RAM, a
> micro SD slot, 10/100Mbit ethernet and a single USB-A port.
>
> Signed-off-by: James Pettigrew
Reviewed-by: Rask Ingemann Lambertsen
--
R
warnings about this sort of
mismatch when your device tree is compiled as part of Das U-Boot.
> +_pio {
> + leds_r_opc: led_pins@0 {
Likewise.
[1] https://www.mail-archive.com/linux-kernel%40vger.kernel.org/msg1122967.html
[2] https://www.mail-archive.com/linux-kernel%40vger.kernel.org/msg1145633.html
--
Rask Ingemann Lambertsen
1 - 100 of 135 matches
Mail list logo
