On Tue, Oct 14, 2014 at 2:11 PM, Krzysztof Kozłowski
wrote:
> On 14.10.2014 10:14, Thomas Abraham wrote:
>> Add support for S2MPS15 PMIC which is similar to S2MPS11 PMIC. The S2MPS15
>> PMIC supports 27 LDO regulators, 10 buck regulators, RTC, three 32.768KHz
>> clock output
On Tue, Oct 14, 2014 at 2:13 PM, Krzysztof Kozłowski
wrote:
> On 14.10.2014 10:14, Thomas Abraham wrote:
>> Add dt-binding documentation for s2mps15 PMIC device. The s2mps15 device
>> is similar to s2mps11/14 PMIC device and has 27 LDO and 10 buck regulators.
>>
>> Cc:
On Tue, Oct 14, 2014 at 2:18 PM, Krzysztof Kozłowski
wrote:
> On 14.10.2014 10:17, Thomas Abraham wrote:
>> The S2MPS15 PMIC is similar in functionality to S2MPS11/14 PMIC. It contains
>> 27 LDO and 10 Buck regulators and allows programming these regulators via a
>> I2C inter
The S2MPS15 PMIC is similar in functionality to S2MPS11/14 PMIC. It contains
27 LDO and 10 Buck regulators and allows programming these regulators via a
I2C interface. This patch adds initial support for LDO/Buck regulators of
S2MPS15 PMIC.
Signed-off-by: Thomas Abraham
---
drivers/regulator
eries adds initial
support for LDO/Buck regulators of S2MPS15 PMIC.
Thomas Abraham (2):
dt-bindings: mfd: s2mps11: add documentation for s2mps15 PMIC
mfd: sec: Add support for S2MPS15 PMIC
Documentation/devicetree/bindings/mfd/s2mps11.txt | 11 +-
drivers/mfd/
Add dt-binding documentation for s2mps15 PMIC device. The s2mps15 device
is similar to s2mps11/14 PMIC device and has 27 LDO and 10 buck regulators.
Cc: devicet...@vger.kernel.org
Signed-off-by: Thomas Abraham
---
Documentation/devicetree/bindings/mfd/s2mps11.txt | 11 ---
1 files
Add support for S2MPS15 PMIC which is similar to S2MPS11 PMIC. The S2MPS15
PMIC supports 27 LDO regulators, 10 buck regulators, RTC, three 32.768KHz
clock outputs and battery charger. This patch adds initial support for
LDO and buck regulators of S2MPS15 device.
Signed-off-by: Thomas Abraham
On Tue, Jul 29, 2014 at 11:35 AM, Mike Turquette wrote:
> Quoting Stephen Boyd (2014-06-24 17:06:13)
>> Sometimes clocks can't accept their parent source turning off
>> while the source is reprogrammed to a different rate. Most
>> notably some CPU clocks require a way to switch away from the
>> cu
On Mon, Jul 21, 2014 at 6:40 PM, Bartlomiej Zolnierkiewicz
wrote:
>
> Hi,
>
> On Monday, July 21, 2014 01:43:53 PM Daniel Drake wrote:
>> On Fri, Jul 18, 2014 at 5:00 PM, Bartlomiej Zolnierkiewicz
>> wrote:
>> > Recent patch by Tomasz Figa ("irqchip: gic: Fix core ID calculation
>> > when topolog
On Wed, Jun 18, 2014 at 2:09 PM, Chanwoo Choi wrote:
> This patchset use cpufreq-cpu0 driver to support Exynos3250 cpufreq. So, this
> patchset is based on following patchset[1] by Thomas Abraham.
> [1] http://www.spinics.net/lists/arm-kernel/msg339392.html
>
> Changes from v1:
On Fri, May 16, 2014 at 2:33 PM, Viresh Kumar wrote:
> Douglas Anderson, recently pointed out an interesting problem due to which
> udelay() was expiring earlier than it should.
>
> While transitioning between frequencies few platforms may temporarily switch
> to
> a stable frequency, waiting for
nclude/linux/cpufreq.h | 21
> include/linux/pm_opp.h | 20 ---
> 7 files changed, 167 insertions(+), 146 deletions(-)
> create mode 100644 drivers/cpufreq/cpufreq_opp.c
Works fine on Exynos.
Tested-by: Thomas Abraham
>
> --
> 1.7.9.5
>
> --
On 14 March 2013 17:31, Alexander Graf wrote:
>
> On 14.03.2013, at 05:19, Thomas Abraham wrote:
>
>> On 14 March 2013 05:29, Alexander Graf wrote:
>>> On my Exynos 5 based Arndale system, I need to pull the reset line down
>>> and then let it go up again to
On 14 March 2013 05:29, Alexander Graf wrote:
> On my Exynos 5 based Arndale system, I need to pull the reset line down
> and then let it go up again to actually perform a reset. Without that
> reset, I can't find any USB hubs on my bus, rendering the USB controller
> useless.
>
> We also only nee
On 7 March 2013 05:41, Kukjin Kim wrote:
> Thomas Abraham wrote:
>>
>> Changes since v1:
>> - Change the compatible string from "samsung,pinctrl-exynos5250" to
>> "samsung,exynos5250-pinctrl".
>> - Rebased to v3.9-rc1
>>
>
> Thom
Add Samsung Exynos5250 SoC specific data to enable pinctrl support for
all platforms based on Exynos5250.
Signed-off-by: Thomas Abraham
Reviewed-by: Tomasz Figa
Acked-by: Linus Walleij
---
drivers/pinctrl/pinctrl-exynos.c | 108 +
drivers/pinctrl/pinctrl
Skip the wakeup interrupt registration for Exynos5250 if pinctrl support
is enabled for Exynos5250.
Signed-off-by: Thomas Abraham
Reviewed-by: Tomasz Figa
Acked-by: Linus Walleij
---
arch/arm/mach-exynos/common.c |1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/arch
Skip exynos5250 gpiolib registration if pinctrl support for exynos5250
is enabled.
Signed-off-by: Thomas Abraham
Reviewed-by: Tomasz Figa
Acked-by: Linus Walleij
---
drivers/gpio/gpio-samsung.c |1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/drivers/gpio/gpio
fic data which is
used by the Samsung pinctrl driver to setup the pinctrl/pinmux/eint
controllers. The second and third patches skips the wakeup interrupt and
gpiolib registration if the pinctrl support is enabled for Exynos5250.
Thomas Abraham (3):
pinctrl: exynos: add exynos5250 SoC specific d
On 27 December 2012 22:28, Kukjin Kim wrote:
> Thomas Abraham wrote:
>>
>> Hi Linus,
>>
>> On 14 December 2012 21:21, Linus Walleij wrote:
>> > On Thu, Dec 13, 2012 at 12:54 PM, Thomas Abraham
>> > wrote:
>> >
>> >> Add
L;
> + }
> +
> + return 0;
> +}
> +#else
> +static int s5m8767_pmic_dt_parse_pdata(struct sec_pmic_dev *iodev,
> + struct sec_platform_data *pdata)
> +{
> + return 0;
> +}
> +#endif /* CONFIG_OF */
> +
>
On 4 January 2013 00:23, Tushar Behera wrote:
> The node entry is added as per documentation and legacy board file.
>
> Signed-off-by: Tushar Behera
> ---
> The patch is rebased on v3.8-rc1.
>
> arch/arm/boot/dts/exynos4210-origen.dts | 150
> +++
> 1 files changed,
On 21 December 2012 09:11, Dongjin Kim wrote:
> This patch adds support for pin configuration using pinctrl subsystem to
> dw_mmc-exynos driver. The property 'wp-gpios' can be specified for write
> protect but 'samsung,cd-pinmux-gpio' and gpios used for clock, command and
> data lines will be igno
Hi Dongjin,
On 17 December 2012 13:55, Dongjin Kim wrote:
> Add initial dtb file for Hardkernel's ODROID-X board based on EXYNOS4412 SoC.
>
> Signed-off-by: Dongjin Kim
> ---
> arch/arm/boot/dts/Makefile |1 +
> arch/arm/boot/dts/exynos4412-odroidx.dts | 52
> ++
> },
> }, {
> .clk= {
> - .name = "sclk_dwmmc",
> + .name = "ciu",
> .parent = &exynos4_clk_dout_mmc4.clk,
>
Hi Dongjin,
On 14 December 2012 20:29, Dongjin Kim wrote:
> Replace clock instance name of MSHC controller for BIC and CIU of Exynos4412.
>
> Signed-off-by: Dongjin Kim
> ---
> arch/arm/mach-exynos/clock-exynos4.c | 25 ++---
> 1 file changed, 14 insertions(+), 11 deletion
Hi Linus,
On 14 December 2012 21:21, Linus Walleij wrote:
> On Thu, Dec 13, 2012 at 12:54 PM, Thomas Abraham
> wrote:
>
>> Add Samsung Exynos5250 SoC specific data to enable pinctrl support for
>> all platforms based on Exynos5250.
>>
>> Signed-off-by: Th
Skip the wakeup interrupt registration for Exynos5250 if pinctrl support
is enabled for Exynos5250.
Signed-off-by: Thomas Abraham
---
arch/arm/mach-exynos/common.c |1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos
Skip exynos5250 gpiolib registration if pinctrl support for exynos5250
is enabled.
Signed-off-by: Thomas Abraham
---
drivers/gpio/gpio-samsung.c |1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index 01f7fe9
Add Samsung Exynos5250 SoC specific data to enable pinctrl support for
all platforms based on Exynos5250.
Signed-off-by: Thomas Abraham
---
drivers/pinctrl/pinctrl-exynos.c | 108 +
drivers/pinctrl/pinctrl-samsung.c |2 +
drivers/pinctrl/pinctrl
iolib registration if the pinctrl support is enabled for Exynos5250.
Thomas Abraham (3):
pinctrl: exynos: add exynos5250 SoC specific data
gpio: samsung: skip gpiolib registration if pinctrl support is enabled for
exynos5250
arm: exynos: skip wakeup interrupt registration for exynos5250 if pi
ctrl] Error 2
> make: *** [drivers] Error 2
>
> Signed-off-by: Axel Lin
Acked-by: Thomas Abraham
Dear Mr. Kim,
Could you please consider this patch in your next pull request for fixes.
Thanks,
Thomas.
[...]
--
To unsubscribe from this list: send the line "unsubscribe linu
On 27 November 2012 18:30, Naveen Krishna Chatradhi
wrote:
> Adds support for High Speed I2C driver found in Exynos5 and later
> SoCs from Samsung. This driver currently supports Auto mode.
>
> Driver only supports Device Tree method.
>
> Signed-off-by: Taekgyun Ko
> Signed-off-by: Naveen Krishna
Add device tree based discovery support for max8997.
Cc: Karol Lewandowski
Cc: Rajendra Nayak
Cc: Rob Herring
Cc: Grant Likely
Signed-off-by: Thomas Abraham
Acked-by: MyungJoo Ham
Reviewed-by: Tomasz Figa
---
This patch is based on 'topic/max8997' branch of Mark Brown's
On 26 November 2012 19:41, Mark Brown
wrote:
> On Mon, Nov 26, 2012 at 07:16:04PM +0530, Thomas Abraham wrote:
>
>> and this patch applied cleanly. Could you please let me know if there
>> is anything I need to be doing differently for this.
>
> Hrm, try applying it on t
On 26 November 2012 15:21, Mark Brown
wrote:
> On Sat, Nov 24, 2012 at 11:46:51PM +0530, Thomas Abraham wrote:
>
>> The max8997 driver is mainlined. I actually meant to say that, this v6
>> version of dt support patch for max8997, is similar in functionality
>> to the v5
On 24 November 2012 23:29, Mark Brown
wrote:
> On Fri, Nov 23, 2012 at 01:33:15PM +0530, Thomas Abraham wrote:
>
>> This v6 patch is rebased to the latest max8997 driver code and there are no
>> functional changes from v5.
>
> That doesn't seem to be in mainline yet
Add device tree based discovery support for max8997.
Cc: Karol Lewandowski
Cc: Rajendra Nayak
Cc: Rob Herring
Cc: Grant Likely
Signed-off-by: Thomas Abraham
Acked-by: MyungJoo Ham
---
This is the sixth version of this patch. The link to v5 version of this patch
is http://www.mail
In case the gpio based volatage selection mode is not used for either of
buck 1/2/5, then only the BUCKxDVS1 register need to be programmed. So
determine whether dvs mode is used and limit the loop count appropriately.
Cc: MyungJoo Ham
Signed-off-by: Thomas Abraham
---
drivers/regulator
The BUCKxDVSx register programming is now moved prior to setting up of the
gpio based dvs mode. This will ensure that all the BUCKxDVSx registers
are programmed with appropriate voltage values before the gpio based dvs
mode is selected for buck1/2/5.
Cc: MyungJoo Ham
Signed-off-by: Thomas
This patch series includes two minor updates to the gpio dvs code in max8997
regulator driver and adds device tree support for the same driver.
Thomas Abraham (3):
regulator: max8997: reorder buck1/2/5 dvs setup code
regulator: max8997: limit the number of dvs registers programmed in non-dvs
Dear Mr. Ham,
Thanks for your comments.
On 21 November 2012 20:01, MyungJoo Ham wrote:
> On Wed, Nov 21, 2012 at 11:23 PM, Thomas Abraham
> wrote:
>> If gpio based voltage selection for buck 1/2/5 are not used, then the
>> execution
>> of gpio dvs setup code dur
If gpio based voltage selection for buck 1/2/5 are not used, then the execution
of gpio dvs setup code during probe can be skipped completly.
Cc: MyungJoo Ham
Cc: Mark Brown
Signed-off-by: Thomas Abraham
---
drivers/regulator/max8997.c | 31 ++-
1 files changed
On 5 November 2012 21:14, Axel Lin wrote:
> This fixes below build error when !CONFIG_OF_GPIO.
>
> CC drivers/pinctrl/pinctrl-samsung.o
> drivers/pinctrl/pinctrl-samsung.c: In function
> 'samsung_pinctrl_parse_dt_pins':
> drivers/pinctrl/pinctrl-samsung.c:557:19: warning: unused variable '
parameter is added to combiner_init function that allows non-dt platform code
to specify the number of combiners available.
Signed-off-by: Thomas Abraham
---
arch/arm/mach-exynos/common.c | 210 +--
drivers/irqchip/Makefile|1 +
drivers/irqchip
ata->parse_dt) {
> + ret = drv_data->parse_dt(host);
> if (ret)
> return ERR_PTR(ret);
> }
> @@ -2080,6 +2084,7 @@ static struct dw_mci_board *dw_mci_parse_dt(struct
> dw_mci *host)
>
> int dw_mci_probe(struct dw_mci
Hi Sylwester,
Thanks for reviewing this patch series.
On 6 October 2012 00:21, Sylwester Nawrocki
wrote:
> Hello,
>
> On 10/01/2012 02:09 PM, chander.kash...@linaro.org wrote:
>> From: Thomas Abraham
>>
>> Register clocks for Exynos4 platfotms using common clock fram
.kash...@linaro.org wrote:
>> From: Thomas Abraham
>>
>> Register clocks for Exynos4 platfotms using common clock framework.
>> Also included are set of helper functions for clock registration
>> that can be reused on other Samsung platforms as well.
>&
Hi Tomasz,
On 3 October 2012 19:40, Tomasz Figa wrote:
> Hi Chander, Thomas,
>
> I can see one more problem here.
>
> Based on the fact that sdhci-s3c driver receives only the endpoint gate
> clock (hsmmc), doesn't the following setup make the driver unable to change
> the frequency of this clock
Hi Tomasz,
Thanks for reviewing this patch series.
On 3 October 2012 16:26, Tomasz Figa wrote:
> Hi Chander, Thomas,
>
> On Monday 01 of October 2012 17:39:19 chander.kash...@linaro.org wrote:
>> From: Thomas Abraham
>>
>> This patch series migrates Exynos4 cl
On 5 September 2012 19:20, Tomasz Figa wrote:
> Hi Thomas,
>
> Thomas Abraham wrote:
>> Add a new device tree enabled pinctrl and gpiolib driver for Samsung
>> SoC's. This driver provides a common and extensible framework for all
>> Samsung SoC's to i
nformation about the pins, pin groups, pin functions and
gpio chips, which are SoC specific, are parsed from device tree node.
Cc: Linus Walleij
Cc: Kukjin Kim
Signed-off-by: Thomas Abraham
---
This is a repost of the v3 version of this patch and includes the fixes
suggested by Stephen Wa
On 3 September 2012 16:44, Linus Walleij wrote:
> On Thu, Aug 23, 2012 at 1:15 PM, Thomas Abraham
> wrote:
>
>> Add a new device tree enabled pinctrl and gpiolib driver for Samsung
>> SoC's. This driver provides a common and extensible framework for all
>> Sam
On 28 August 2012 04:52, Linus Walleij wrote:
> On Tue, Aug 21, 2012 at 9:22 PM, Thomas Abraham
> wrote:
[...]
>>>> +/* list of all possible config options supported */
>>>> +struct pin_config {
>>>> + char*prop_cfg;
>>&g
On 24 August 2012 04:42, Stephen Warren wrote:
> On 08/23/2012 05:15 AM, Thomas Abraham wrote:
>> Add a new device tree enabled pinctrl and gpiolib driver for Samsung
>> SoC's. This driver provides a common and extensible framework for all
>> Samsung SoC's to
: Thomas Abraham
---
drivers/pinctrl/Kconfig |4 +
drivers/pinctrl/Makefile |1 +
drivers/pinctrl/pinctrl-exynos.c | 560 ++
drivers/pinctrl/pinctrl-exynos.h | 217 +++
4 files changed, 782 insertions(+), 0 deletions
Pinctrl driver includes support for configuring the external wakeup
interrupts. On exynos platforms that use pinctrl driver, the setup
of wakeup interrupts in the exynos platform code can be skipped.
Cc: Kukjin Kim
Signed-off-by: Thomas Abraham
---
arch/arm/mach-exynos/common.c | 26
nformation about the pins, pin groups, pin functions and
gpio chips, which are SoC specific, are parsed from device tree node.
Cc: Linus Walleij
Cc: Kukjin Kim
Signed-off-by: Thomas Abraham
---
.../bindings/pinctrl/samsung-pinctrl.txt | 196 +
drivers/pinct
Pinctrl driver, when enabled, registers all the gpio pins and hence the
registration of gpio pins by this driver can be skipped.
Signed-off-by: Thomas Abraham
Acked-by: Grant Likely
Acked-by: Linus Walleij
---
drivers/gpio/gpio-samsung.c | 21 +
1 files changed, 21
e pin-control driver.
Thomas Abraham (4):
pinctrl: add samsung pinctrl and gpiolib driver
pinctrl: add exynos4210 specific extensions for samsung pinctrl driver
gpio: exynos4: skip gpiolib registration if pinctrl driver is used
ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is
On 22 August 2012 03:08, Stephen Warren wrote:
> On 08/21/2012 05:25 AM, Linus Walleij wrote:
>> On Wed, Aug 15, 2012 at 9:57 PM, Thomas Abraham
>> wrote:
>>
>>> Add a new device tree enabled pinctrl and gpiolib driver for Samsung
>>> SoC's.
>
On 21 August 2012 17:34, Linus Walleij wrote:
> On Wed, Aug 15, 2012 at 9:57 PM, Thomas Abraham
> wrote:
>
>> Pinctrl driver includes support for configuring the external wakeup
>> interrupts. On exynos platforms that use pinctrl driver, the setup
>> of wakeup interr
On 21 August 2012 17:35, Linus Walleij wrote:
> On Wed, Aug 15, 2012 at 9:57 PM, Thomas Abraham
> wrote:
>
>> Pinctrl driver, when enabled, registers all the gpio pins and hence the
>> registration of gpio pins by this driver can be skipped.
>>
>> Acked-by:
On 21 August 2012 17:32, Linus Walleij wrote:
> On Wed, Aug 15, 2012 at 9:57 PM, Thomas Abraham
> wrote:
>
>> Add information about the Exynos4210 pin banks and driver data which is
>> used by the Samsung pinctrl driver. In addition to this, the support for
>> externa
Hi Linus,
Thanks for your time to review the Samsung pinctrl driver patches. I
have inlined the reply to your comments.
On 21 August 2012 16:55, Linus Walleij wrote:
> On Wed, Aug 15, 2012 at 9:57 PM, Thomas Abraham
> wrote:
>
>> Add a new device tree enabled pinctrl and gpi
; ---
> drivers/thermal/exynos_thermal.c | 111
> +-
> 1 files changed, 110 insertions(+), 1 deletions(-)
Reviewed-by: Thomas Abraham
Few minor comments inline below.
>
> diff --git a/drivers/thermal/exynos_thermal.c
> b/drivers/thermal/exynos_thermal.c
> i
: Thomas Abraham
---
drivers/pinctrl/Kconfig |7 +
drivers/pinctrl/Makefile |1 +
drivers/pinctrl/pinctrl-exynos.c | 555 ++
drivers/pinctrl/pinctrl-exynos.h | 213 +++
4 files changed, 776 insertions(+), 0 deletions
Pinctrl driver includes support for configuring the external wakeup
interrupts. On exynos platforms that use pinctrl driver, the setup
of wakeup interrupts in the exynos platform code can be skipped.
Cc: Kukjin Kim
Signed-off-by: Thomas Abraham
---
arch/arm/mach-exynos/common.c | 26
Pinctrl driver, when enabled, registers all the gpio pins and hence the
registration of gpio pins by this driver can be skipped.
Acked-by: Grant Likely
Acked-by: Linus Walleij
Signed-off-by: Thomas Abraham
---
drivers/gpio/gpio-samsung.c | 21 +
1 files changed, 21
nformation about the pins, pin groups, pin functions and
gpio chips, which are SoC specific, are parsed from device tree node.
Cc: Linus Walleij
Cc: Kukjin Kim
Signed-off-by: Thomas Abraham
---
.../bindings/pinctrl/samsung-pinctrl.txt | 176
drivers/pinct
p the gpio pin
registrations if pinctrl driver support is found to be enabled. The fourth
patch skips the external wakeup interrupt configuration process in the
Exynos4 platform code if the external wakeup interrupt support is provided
by the pin-control driver.
Thomas Abraham (4):
pinctrl
ion [-Wuninitialized]
>
> Signed-off-by: Arnd Bergmann
> Cc: Thomas Abraham
> Cc: Jaswinder Singh
> Cc: Grant Likely
> Cc: Kukjin Kim
> ---
> drivers/spi/spi-s3c64xx.c |2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/spi/spi-
utomatically discard
> it.
>
> Without this patch, building exynos_defconfig results in:
>
> arch/arm/mach-exynos/pm_domains.c:118:123: warning:
> 'exynos_pm_add_dev_to_genpd' defined but not used [-Wunused-function]
>
> Signed-off-by: Arnd Bergmann
> Cc: Thomas A
On 8 August 2012 00:42, Dongjin Kim wrote:
> This patch create a DTS file for ODROID-X, it desribes PMIC max77686 and LED
> gpios base.
>
> Signed-off-by: Dongjin Kim
> ---
> arch/arm/boot/dts/exynos4412-odroidx.dts | 148
> ++
> 1 file changed, 148 insertions(+)
>
On 8 August 2012 00:36, Dongjin Kim wrote:
> This patch creates a DTS file, exynos4.dtsi, for Exynos4210/4x12 and it
> describes common device nodes. SoC specific device nodes are described in
> another DTS file derived from this, exynos4210.dtsi and exynos4412.dtsi.
>
> exynos4412.dtsi is added n
On 6 August 2012 19:27, Dongjin Kim wrote:
> GPIO functions are not registered for Exynos4412 yet,
> therefore exynos4_gpiolib_init() is added to initialize Exynos4412 SoC.
>
> Change-Id: I5945d94c6fbfc309ccf882eba067864a338c04ca
> Signed-off-by: Dongjin Kim
> ---
> drivers/gpio/gpio-samsung.c |
On 7 August 2012 07:58, Olof Johansson wrote:
> Hi,
>
> On Mon, Aug 6, 2012 at 7:05 PM, Dongjin Kim
> wrote:
>> Hello,
>>
>> I am trying to understand what I have to do for device tree.
>>
>> In order to create dts file for ODROID-X hardware, it seems I may need dts
>> file of EXYNOS4412 SoC.
>>
On 6 August 2012 19:40, Dongjin Kim wrote:
> The HKDK4412 is the CPU module developed by Hardkernel which is based on
> Exynos 4412. mach_hkdk4412.c is to run on ODROID-X hardware and Machine ID
> (4289) is registered.
>
> Change-Id: I3af02808c03b9acea916c310390a4904ad92d761
> Signed-off-by: Dong
s.wall...@stericsson.com;
>> linux-kernel@vger.kernel.org;
>> ol...@chromium.org; Sangsu Park; Thomas Abraham; Kukjin Kim
>> Subject: Re: [PATCH] gpio: samsung: Fix off-by-one bug in gpio addresses
>>
>> Acked-by: Doug Anderson
>>
>> ---
>>
&
On 20 July 2012 16:08, Seungwon Jeon wrote:
> July 20, 2012, Thomas Abraham wrote:
>> On 19 July 2012 09:21, Seungwon Jeon wrote:
[...]
>> >> +static unsigned long exynos5250_dwmmc_caps[4] = {
>> >> + MMC_CAP_UHS_DDR50 | MMC_CAP_1_8V_DDR |
>&
r Exynos SoC's for now.
Splitting into different files will need to defined new callbacks
which I fell is not really required.
Thanks,
Thomas.
>
> Best Regards,
> Jaehoon Chung
>
> On 07/12/2012 09:54 PM, Thomas Abraham wrote:
>> This patch series adds device tree suppor
On 19 July 2012 09:21, Seungwon Jeon wrote:
> Hi,
>
> This version does not seems to consider previous reviews fully.
> Could you check the comments below?
I did try to address all the comments. I will check again and resubmit
if I have missed anything.
>
> July 12, 2012, Tho
Some platforms allow for clock gating and control of bus interface unit clock
and card interface unit clock. Add support for clock lookup of optional biu
and ciu clocks for clock gating and clock speed determination.
Signed-off-by: Abhilash Kesavan
Signed-off-by: Thomas Abraham
---
drivers/mmc
Add device tree based discovery support.
Signed-off-by: Thomas Abraham
---
.../devicetree/bindings/mmc/synposis-dw-mshc.txt | 99 ++
drivers/mmc/host/dw_mmc-pltfm.c| 23 +++
drivers/mmc/host/dw_mmc.c | 201 +++-
drivers
On 16 July 2012 09:53, Chris Ball wrote:
> Hi,
>
> On Thu, Jul 12 2012, Thomas Abraham wrote:
>> diff --git a/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt
>> b/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt
>> new file mode 100644
>> i
On 16 July 2012 09:45, Girish K S wrote:
> On 12 July 2012 18:24, Thomas Abraham wrote:
[...]
>>
>> +#ifdef CONFIG_OF
>> +static struct dw_mci_drv_data synopsis_drv_data = {
>> + .ctrl_type = DW_MCI_TYPE_SYNOPSIS,
>> +};
>> +
>> +static
Instead of aborting the probe in case a slot initialization fails, allow
initialization of as many slots as possible. If there are atleast one
instance of slot that is successfully initialized, allow the driver probe
to succeed.
Signed-off-by: Thomas Abraham
---
drivers/mmc/host/dw_mmc.c | 23
Some platforms allow for clock gating and control of bus interface unit clock
and card interface unit clock. Add support for clock lookup of optional biu
and ciu clocks for clock gating and clock speed determination.
Signed-off-by: Abhilash Kesavan
Signed-off-by: Thomas Abraham
---
drivers/mmc
Add device tree based discovery support.
Signed-off-by: Thomas Abraham
---
.../devicetree/bindings/mmc/synposis-dw-mshc.txt | 108 +++
drivers/mmc/host/dw_mmc-pltfm.c| 24 +++
drivers/mmc/host/dw_mmc.c | 201
extenstions.
Signed-off-by: Abhilash Kesavan
Signed-off-by: Thomas Abraham
---
.../devicetree/bindings/mmc/synposis-dw-mshc.txt | 38 ++-
drivers/mmc/host/dw_mmc-pltfm.c| 15 +++
drivers/mmc/host/dw_mmc.c | 40
with device tree support enabled, such platform callbacks
cannot be supported.
Add a new quirk for notifying the driver about the missing write protect
line so the driver can assume that the card write protection is disabled.
Signed-off-by: Thomas Abraham
Acked-by: Will Newton
---
drivers/mmc
dw_mci' is then incorrect. Fix this by
converting the copy of 'struct device' in 'struct dw_mci' to a reference.
Signed-off-by: Thomas Abraham
---
drivers/mmc/host/dw_mmc-pci.c |2 +-
drivers/mmc/host/dw_mmc-pltfm.c |2 +-
drivers/mmc/host/dw_mmc.c | 56 +++
sixth patch add Samsung Exynos5250 specific extentions to the driver.
This patchset is based on Samsung kernel tree's for-next branch with the
mmc tree's mmc-next branch merged.
Thomas Abraham (6):
mmc: dw_mmc: convert copy of struct device in struct dw_mci to a reference
mmc: dw_
93 matches
Mail list logo