Antonio Ospite schrieb:
On Sun, 4 Oct 2009 00:31:24 +0200 (CEST)
Guennadi Liakhovetski wrote:
On Sat, 3 Oct 2009, Antonio Ospite wrote:
[...]
Anyways your patch works, but the picture is now shifted, see:
http://people.openezx.org/ao2/a780-pxa-camera-mt9m111-shifted.jpg
Is this
Hi,
Good one,
Acked-by: Hans de Goede
Jean-Francois, can you please add this patch to your tree?
Thanks,
Hans
On 10/04/2009 10:55 PM, Németh Márton wrote:
From: Márton Németh
The original implementation of pac_find_sof() does not always find
the Start Of Frame (SOF) marker. Replace it wi
Hi there,
with kernel 2.6.30.8 my "TwinhanDTV USB-Ter USB1.1 / Magic Box I"
worked.
Now with kernel 2.6.32-rc3 (and 2.6.31.1) the modules seems to be
loaded fine, but tzap/kaffeine/mplayer can not tune to a channel:
dmesg says:
dvb-usb: found a 'TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA U
Commit b4028437876866aba4747a655ede00f892089e14 has broken again re-use of
device objects across device_register() / device_unregister() cycles. Fix
soc-camera by nullifying the struct after device_unregister().
Signed-off-by: Guennadi Liakhovetski
---
diff --git a/drivers/media/video/soc_camer
On Sun, 04 Oct 2009 21:54:37 -0400, Andy Walls wrote:
> On Mon, 2009-10-05 at 01:23 +0300, Aleksandr V. Piskunov wrote:
> > So the solution(?) I found was to decrease the udelay in
> > ivtv_i2c_algo_template from 10 to 5. Guess it just doubles the frequency
> > of ivtv i2c bus or something like tha
> > Basicly during the I2C operation that reads scancode, controller seems
> > to stop processing input from IR sensor, resulting a loss of keypress.
> >
> > So the solution(?) I found was to decrease the udelay in
> > ivtv_i2c_algo_template from 10 to 5. Guess it just doubles the frequency
> > of
On Mon, 5 Oct 2009 11:50:31 +0300, Aleksandr V. Piskunov wrote:
> > Try:
> >
> > # modprobe ivtv newi2c=1
> >
> > to see if that works first.
> >
>
> udelay=10, newi2c=0 => BAD
> udelay=10, newi2c=1 => BAD
> udelay=5, newi2c=0 => OK
> udelay=5, newi2c=1 => BAD
The udelay value is only u
On Mon, Oct 05, 2009 at 11:04:02AM +0200, Jean Delvare wrote:
> On Mon, 5 Oct 2009 11:50:31 +0300, Aleksandr V. Piskunov wrote:
> > > Try:
> > >
> > > # modprobe ivtv newi2c=1
> > >
> > > to see if that works first.
> > >
> >
> > udelay=10, newi2c=0 => BAD
> > udelay=10, newi2c=1 => BAD
> >
On Mon, 2009-10-05 at 10:29 +0200, Jean Delvare wrote:
> On Sun, 04 Oct 2009 21:54:37 -0400, Andy Walls wrote:
> > On Mon, 2009-10-05 at 01:23 +0300, Aleksandr V. Piskunov wrote:
> > >
> > > So question is:
> > > 1) Is it ok to decrease udelay for this board?
> >
> > Sure, I think. It would act
Hi,
I'm currently trying to replay a transport stream from a file, having
read through the v3 API docs and this mailing list I'm fairly certain I
have a good understanding of how to do this. I am however using the
test_dvr_play test program from the dvb-apps suite rather than writing
my own c
Hi Dênis,
Em Sat, 3 Oct 2009 10:02:26 -0300
Dênis Goes escreveu:
> Hi People...
>
> I'm a programmer and I want to help in development of tm6010 driver to
> finish the driver and use my PixelView 405 USB card.
>
> What the status of tm6010 driver ??? How to obtain the correct tridvid.sys
> fil
Em Wed, 23 Sep 2009 20:47:17 +0300
"Igor M. Liplianin" escreveu:
> Mauro,
>
> Please pull from http://mercurial.intuxication.org/hg/v4l-dvb-commits
>
> for the following 2 changesets:
>
> 01/02: Add support for TBS-likes remotes
> http://mercurial.intuxication.org/hg/v4l-dvb-commits?cmd=change
Upcoming I2C v4l2_subdev drivers need a way to control the subdevice
power state from the core. This use case is already partially covered by
the tuner s_standby operation, but no way to explicitly come back from
the standby state is available.
Rename the tuner s_standby operation to core s_power,
Hi Mario,
On Mon, 5 Oct 2009, Mario Bachmann wrote:
with kernel 2.6.30.8 my "TwinhanDTV USB-Ter USB1.1 / Magic Box I"
worked.
Now with kernel 2.6.32-rc3 (and 2.6.31.1) the modules seems to be
loaded fine, but tzap/kaffeine/mplayer can not tune to a channel:
dmesg says:
dvb-usb: found a 'Twinha
On Mon, Oct 5, 2009 at 6:02 AM, Aleksandr V. Piskunov
wrote:
> Yup, also tried udelay=4, IR controller handles it without problems,
> though cx25840 and xc2028 doesn't seem to like the 125 KHz frequency,
> refusing to communicate. xc2028 even stopped responding, requiring a cold
> reboot.
The i2c
Hello,
On Friday, October 02, 2009 6:25 PM Ivan T. Ivanov wrote:
> On Fri, 2009-10-02 at 13:45 +0200, Marek Szyprowski wrote:
> > Hello,
> >
> > During the V4L2 mini-summit and the Media Controller RFC discussion on
> > Linux Plumbers 2009 Conference a mem2mem video device has been mentioned
> >
Hello,
On Monday, October 05, 2009 7:43 AM Hiremath, Vaibhav wrote:
> In terms of V4L2 framework such device would be both video
> > sink
> > and source at the same time. The main problem is how the video nodes
> > (/dev/videoX) should be assigned to such a device.
> >
> > The simplest way of imp
Hello,
On Monday, October 05, 2009 7:59 AM Hiremath, Vaibhav wrote:
> -Original Message-
> From: linux-media-ow...@vger.kernel.org
> [mailto:linux-media-ow...@vger.kernel.org] On Behalf Of
> Hiremath, Vaibhav
> Sent: Monday, October 05, 2009 7:59 AM
> To: Ivan T. Ivanov; Marek Szyprowski
Hi,
On Mon, 2009-10-05 at 15:54 +0200, Marek Szyprowski wrote:
> Hello,
>
> On Friday, October 02, 2009 6:25 PM Ivan T. Ivanov wrote:
>
> > On Fri, 2009-10-02 at 13:45 +0200, Marek Szyprowski wrote:
> > > Hello,
> > >
> > > During the V4L2 mini-summit and the Media Controller RFC discussion on
Am Mon, 5 Oct 2009 15:50:13 +0200 (CEST)
schrieb Patrick Boettcher :
> Hi Mario,
>
> On Mon, 5 Oct 2009, Mario Bachmann wrote:
> > with kernel 2.6.30.8 my "TwinhanDTV USB-Ter USB1.1 / Magic Box I"
> > worked.
> >
> > Now with kernel 2.6.32-rc3 (and 2.6.31.1) the modules seems to be
> > loaded fin
On Mon, 5 Oct 2009, Paul Mundt wrote:
> On Sat, Oct 03, 2009 at 01:21:30PM +0200, Guennadi Liakhovetski wrote:
> > Signed-off-by: Guennadi Liakhovetski
> > ---
> > arch/sh/boards/mach-kfr2r09/setup.c | 139
> > +++
> > 1 files changed, 139 insertions(+), 0 delet
I need to use the analog part, the Mandriva team from bugzilla try to help me ,
but in the end they suggest to look for help at you; the problem and trials are
found here:
https://qa.mandriva.com/show_bug.cgi?id=54131
can you help me please, I don't wan go back to windows...
http://pigulici.110mb
Hi Mauro,
As agreed upon, I regenerated my tree, which now includes 4 fixes and a
new sensor driver. All marked "Priority: high."
Please pull from http://linuxtv.org/hg/~gliakhovetski/v4l-dvb
for the following 6 changesets:
01/06: sh_mobile_ceu: add soft reset function
http://linuxtv.org/hg/~g
Hello Morimoto-san
On Mon, 5 Oct 2009, Kuninori Morimoto wrote:
> Dear Guennadi
>
> > diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
> > index e706cee..2851e5e 100644
> > --- a/drivers/media/video/Makefile
> > +++ b/drivers/media/video/Makefile
> > @@ -79,6 +79,7 @@ obj
> -Original Message-
> From: Marek Szyprowski [mailto:m.szyprow...@samsung.com]
> Sent: Monday, October 05, 2009 7:26 PM
> To: Hiremath, Vaibhav; linux-media@vger.kernel.org
> Cc: kyungmin.p...@samsung.com; Tomasz Fujak; Pawel Osciak; Marek
> Szyprowski
> Subject: RE: Mem2Mem V4L2 devices
This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date:Mon Oct 5 19:00:08 CEST 2009
path:http://www.linuxtv.org/hg/v4l-dvb
changeset: 13046:c7aa399e5dac
gcc version: gcc
> -Original Message-
> From: Marek Szyprowski [mailto:m.szyprow...@samsung.com]
> Sent: Monday, October 05, 2009 7:26 PM
> To: Hiremath, Vaibhav; 'Ivan T. Ivanov'; linux-media@vger.kernel.org
> Cc: kyungmin.p...@samsung.com; Tomasz Fujak; Pawel Osciak; Marek
> Szyprowski
> Subject: RE: Mem2
On Monday 05 of October 2009 at 00:23:47, Aleksandr V. Piskunov wrote:
> On Sat, Oct 03, 2009 at 11:44:20AM -0400, Andy Walls wrote:
> > Aleksandr and Jean,
> >
> > Zdrastvoitye & Bonjour,
> >
> > To support the AVerMedia M166's IR microcontroller in ivtv and
> > ir-kbd-i2c with the new i2c binding
Hi Vaibhav,
On Mon, 2009-10-05 at 23:57 +0530, Hiremath, Vaibhav wrote:
> > -Original Message-
> > From: Marek Szyprowski [mailto:m.szyprow...@samsung.com]
> > Sent: Monday, October 05, 2009 7:26 PM
> > To: Hiremath, Vaibhav; 'Ivan T. Ivanov'; linux-media@vger.kernel.org
> > Cc: kyungmin.
> -Original Message-
> From: Ivan T. Ivanov [mailto:iiva...@mm-sol.com]
> Sent: Tuesday, October 06, 2009 12:27 AM
> To: Hiremath, Vaibhav
> Cc: Marek Szyprowski; linux-media@vger.kernel.org;
> kyungmin.p...@samsung.com; Tomasz Fujak; Pawel Osciak
> Subject: RE: Mem2Mem V4L2 devices [RFC]
On Tue, 2009-10-06 at 00:31 +0530, Hiremath, Vaibhav wrote:
> > -Original Message-
> > From: Ivan T. Ivanov [mailto:iiva...@mm-sol.com]
> > Sent: Tuesday, October 06, 2009 12:27 AM
> > To: Hiremath, Vaibhav
> > Cc: Marek Szyprowski; linux-media@vger.kernel.org;
> > kyungmin.p...@samsung.com
Thanks,
Vaibhav Hiremath
Platform Support Products
Texas Instruments Inc
Ph: +91-80-25099927
> -Original Message-
> From: Ivan T. Ivanov [mailto:iiva...@mm-sol.com]
> Sent: Tuesday, October 06, 2009 12:39 AM
> To: Hiremath, Vaibhav
> Cc: Marek Szyprowski; linux-media@vger.kernel.org;
> k
>>
>> 1. How to set different color space or size for input and output buffer
>> each? It could be solved by adding a set of ioctls to get/set source
>> image format and size, while the existing v4l2 ioctls would only refer
>> to the output buffer. Frankly speaking, we don't like this idea.
>
>I
Hi,
On Mon, 2009-10-05 at 15:02 -0500, Karicheri, Muralidharan wrote:
>
> >>
> >> 1. How to set different color space or size for input and output buffer
> >> each? It could be solved by adding a set of ioctls to get/set source
> >> image format and size, while the existing v4l2 ioctls would on
>>
>> Ivan,
>>
>> There is another use case where there are two Resizer hardware working on
>the same input frame and give two different output frames of different
>resolution. How do we handle this using the one video device approach you
>> just described here?
>
> what is the difference?
>
>- yo
Hi Andy,
On Sun, 04 Oct 2009 16:11:32 -0400, Andy Walls wrote:
> On Sun, 2009-10-04 at 10:54 +0200, Jean Delvare wrote:
> > On Sat, 03 Oct 2009 11:44:20 -0400, Andy Walls wrote:
> > > /* This array should match the IVTV_HW_ defines */
> > > @@ -126,7 +131,8 @@
> > > "wm8739",
> > > "vp27smpx"
Hi,
Dênis Goes wrote:
Hi Matthieu...
I made the same answer yesterday... I want to help in development for use my
PixelView 405 USB.
Do you have the correct tridvid.sys file to extract the firmware ?
No, I took the firmware (for the tuner) somewhere on internet.
Some time ago I have done som
Hi Michael,
> -Original Message-
> From: linux-omap-ow...@vger.kernel.org
> [mailto:linux-omap-ow...@vger.kernel.org] On Behalf Of michael
> Sent: Sunday, October 04, 2009 7:29 PM
> To: Nishanth Menon
> Cc: linux-o...@vger.kernel.org; linux-media@vger.kernel.org
> Subject: Re: ISP OMAP3
Hi,
Are we constrained to use the QBUF/DQBUF/STREAMON/STREAMOFF model for this
specific device (memory to memory)? What about adding new IOCTLs that can be
used for this specific device type that possibly can simplify the
implementation? As we have seen in the discussion, this is not a streamin
Hi,
Aguirre Rodriguez, Sergio Alberto wrote:
Hi Michael,
-Original Message-
From: linux-omap-ow...@vger.kernel.org
[mailto:linux-omap-ow...@vger.kernel.org] On Behalf Of michael
Sent: Sunday, October 04, 2009 7:29 PM
To: Nishanth Menon
Cc: linux-o...@vger.kernel.org; linux-media@vger
Hello,
On Monday, October 05, 2009 8:07 PM Hiremath, Vaibhav wrote:
> -Original Message-
> From: Hiremath, Vaibhav [mailto:hvaib...@ti.com]
> Sent: Monday, October 05, 2009 8:07 PM
> To: Marek Szyprowski; linux-media@vger.kernel.org
> Cc: kyungmin.p...@samsung.com; Tomasz Fujak; Pawel Osc
Hello,
On October 06, 2009 12:31 AM Karicheri, Muralidharan wrote:
> Are we constrained to use the QBUF/DQBUF/STREAMON/STREAMOFF model for this
> specific device (memory to
> memory)? What about adding new IOCTLs that can be used for this specific
> device type that possibly can
> simplify the
Hello,
On Monday, October 05, 2009 8:27 PM Hiremath, Vaibhav wrote:
> > > [Hiremath, Vaibhav] IMO, this implementation is not streaming
> > model, we are trying to fit mem-to-mem
> > > forcefully to streaming.
> >
> > Why this does not fit streaming? I see no problems with streaming
> > over mem2
Hello Hans,
Searching the image encoding type of a new (but old!) webcam and tracing
some decoding functions, I was surprised to see a move of constant
tables to the stack in internal_spca561_decode.
Best regards.
--
Ken ar c'hentañ | ** Breizh ha Linux atav! **
Jef |
44 matches
Mail list logo