On Tuesday, February 22, 2011 22:42:58 Sylwester Nawrocki wrote:
Hi everybody,
On 02/22/2011 06:00 PM, Hans Verkuil wrote:
On Tuesday, February 22, 2011 17:27:47 Guennadi Liakhovetski wrote:
On Tue, 22 Feb 2011, Stan wrote:
In principle I agree with this bus negotiation.
- So.
On Wednesday, February 23, 2011 09:10:42 Hans Verkuil wrote:
Unfortunately, if a subdev is set to 'sample at rising edge', then that does
not necessarily mean that the host should sample at the same edge. Depending
on the clock line routing and the integrity of the clock signal the host may
On Wed, 23 Feb 2011, Hans Verkuil wrote:
On Tuesday, February 22, 2011 22:42:58 Sylwester Nawrocki wrote:
Hi everybody,
On 02/22/2011 06:00 PM, Hans Verkuil wrote:
On Tuesday, February 22, 2011 17:27:47 Guennadi Liakhovetski wrote:
On Tue, 22 Feb 2011, Stan wrote:
In principle
On Tue, 22 Feb 2011, Hans Verkuil wrote:
On Tuesday, February 22, 2011 17:39:25 Guennadi Liakhovetski wrote:
On Tue, 22 Feb 2011, Hans Verkuil wrote:
Hi
Any thoughts about the subj? Hasn't anyone run into a need to select
inputs on subdevices until now? Something like
On Wednesday, February 23, 2011 11:13:57 Guennadi Liakhovetski wrote:
On Tue, 22 Feb 2011, Hans Verkuil wrote:
On Tuesday, February 22, 2011 17:39:25 Guennadi Liakhovetski wrote:
On Tue, 22 Feb 2011, Hans Verkuil wrote:
Hi
Any thoughts about the subj? Hasn't anyone run
Hi Nick,
On 02/22/2011 11:54 PM, Nick Pelling wrote:
Hi yujinzhi,
At 22:00 22/02/2011 +0800, =?GB2312?B?0+C999bH?= wrote:
I have port a embeded linux system on my board based on EP9315, with
support for usb video capture device, V4L2. Do you need V4L2 based on
usb video capture device or
Hi Guennadi,
On Tuesday 22 February 2011 12:40:32 Guennadi Liakhovetski wrote:
On Tue, 22 Feb 2011, Stanimir Varbanov wrote:
This RFC patch adds a new subdev sensor operation named
g_interface_parms. It is planned as a not mandatory operation and it is
driver's developer decision to use it
Hi Sergio,
On Tuesday 22 February 2011 15:01:57 Aguirre, Sergio wrote:
On Tuesday, February 22, 2011 7:33 AM Hans Verkuil wrote: On Tuesday,
February 22, 2011 12:40:32 Guennadi Liakhovetski wrote:
On Tue, 22 Feb 2011, Stanimir Varbanov wrote:
This RFC patch adds a new subdev sensor
FIMC is hardware function like csc, post, rotatin and so on.
It is necessary to send some data to FB from FIMC.
So, I have registered FB driver as v4l2 sub-device of FIMC.
| v4l2_device |
| fimc-0 |
|
On Tuesday 22 February 2011 18:08:40 Guennadi Liakhovetski wrote:
On Tue, 22 Feb 2011, Hans Verkuil wrote:
[snip]
I also think that there is a reasonable chance that such bugs can happen.
Take a scenario like this: someone writes a new host driver. Initially
there is only support for
Add I2C/V4L2 subdev driver for M-5MOLS camera sensor with integrated
image signal processor.
Signed-off-by: Heungjun Kim riverful@samsung.com
Signed-off-by: Sylwester Nawrocki s.nawro...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
Hello,
This is fifth version of
On Tue, 2011-02-22 at 14:34 +0200, Dennis Kurten wrote:
On Tue, Feb 15, 2011 at 4:23 PM, Dennis Kurten dennis.kur...@gmail.com
wrote:
Hello Andy, I've tried some of your suggestions, but no luck so far.
On Tue, Feb 15, 2011 at 4:09 AM, Andy Walls awa...@md.metrocast.net wrote:
On Mon,
On Wednesday, February 23, 2011 15:06:49 Aguirre, Sergio wrote:
Guennadi and Hans,
snip
The only static data I am concerned about are those that affect signal
integrity.
After thinking carefully about this I realized that there is really only
one
setting that is relevant to
On Wed, 23 Feb 2011, Hans Verkuil wrote:
On Wednesday, February 23, 2011 15:06:49 Aguirre, Sergio wrote:
Guennadi and Hans,
snip
The only static data I am concerned about are those that affect signal
integrity.
After thinking carefully about this I realized that there is
-Original Message-
From: Hans Verkuil [mailto:hansv...@cisco.com]
Sent: Wednesday, February 23, 2011 3:32 AM
To: Hans Verkuil
Cc: Sylwester Nawrocki; Guennadi Liakhovetski; Stan; linux-
me...@vger.kernel.org; Laurent Pinchart; Aguirre, Sergio
Subject: Re: [RFC/PATCH 0/1] New
On Wednesday 23 February 2011 15:06:49 Aguirre, Sergio wrote:
snip
The only static data I am concerned about are those that affect signal
integrity.
After thinking carefully about this I realized that there is really
only one setting that is relevant to that: the sampling edge.
Hi,
-Original Message-
From: Laurent Pinchart [mailto:laurent.pinch...@ideasonboard.com]
Sent: Wednesday, February 23, 2011 10:15 AM
To: Hans Verkuil
Cc: Aguirre, Sergio; Guennadi Liakhovetski; Hans Verkuil; Sylwester
Nawrocki; Stan; linux-media@vger.kernel.org
Subject: Re:
On Wednesday, February 23, 2011 17:14:41 Laurent Pinchart wrote:
On Wednesday 23 February 2011 17:02:57 Hans Verkuil wrote:
On Wednesday, February 23, 2011 16:30:42 Laurent Pinchart wrote:
On Wednesday 23 February 2011 15:06:49 Aguirre, Sergio wrote:
snip
The only static data
On Wednesday 23 February 2011 17:28:39 Hans Verkuil wrote:
On Wednesday, February 23, 2011 17:14:41 Laurent Pinchart wrote:
On Wednesday 23 February 2011 17:02:57 Hans Verkuil wrote:
[snip]
When you switch polarity for data/field/hsync/vsync signals on a simple
bus you just invert
Hi Guennadi,
On Wednesday 23 February 2011 10:31:21 Guennadi Liakhovetski wrote:
[snip]
Currently soc-camera auto-configures the following parameters:
hsync polarity
vsync polarity
data polarity
Data polarity ? Are there sensors that can invert the data polarity ?
master / slave mode
On Wed, 23 Feb 2011, Laurent Pinchart wrote:
Hi Guennadi,
On Wednesday 23 February 2011 10:31:21 Guennadi Liakhovetski wrote:
[snip]
Currently soc-camera auto-configures the following parameters:
hsync polarity
vsync polarity
data polarity
Data polarity ? Are there sensors
Hi Michael,
On Monday 21 February 2011 15:47:28 Michael Jones wrote:
Hi Laurent,
sorry to resurrect this from a month ago...
I've continued to export omap_pm_set_min_bus_tput() to enable building
the omap3-isp module, although Paul Wamsley's reply you referred to
clearly indicates that
On Wed, 23 Feb 2011, Aguirre, Sergio wrote:
Hi,
-Original Message-
From: Laurent Pinchart [mailto:laurent.pinch...@ideasonboard.com]
Sent: Wednesday, February 23, 2011 10:15 AM
To: Hans Verkuil
Cc: Aguirre, Sergio; Guennadi Liakhovetski; Hans Verkuil; Sylwester
Nawrocki;
Hello
The DVB-T2 USB stick appears to be in stock in the UK.
Product page:
http://www.pctvsystems.com/Products/ProductsEuropeAsia/Digitalproducts/PCTVnanoStickT2/tabid/248/language/en-GB/Default.aspx
Play.com, Dabs and Amzon.co.uk list it as in stock.
Is there any work started on a driver at
On Wed, Feb 23, 2011 at 11:49 AM, Nicolas Will n...@youplala.net wrote:
Hello
The DVB-T2 USB stick appears to be in stock in the UK.
Product page:
http://www.pctvsystems.com/Products/ProductsEuropeAsia/Digitalproducts/PCTVnanoStickT2/tabid/248/language/en-GB/Default.aspx
Play.com, Dabs and
Hi Guennadi,
-Original Message-
From: Guennadi Liakhovetski [mailto:g.liakhovet...@gmx.de]
Sent: Wednesday, February 23, 2011 10:46 AM
To: Aguirre, Sergio
Cc: Laurent Pinchart; Hans Verkuil; Sylwester Nawrocki; Stan; linux-
me...@vger.kernel.org
Subject: RE: [RFC/PATCH 0/1] New
On Wed, 2011-02-23 at 12:07 -0500, Devin Heitmueller wrote:
On Wed, Feb 23, 2011 at 11:49 AM, Nicolas Will n...@youplala.net wrote:
Hello
The DVB-T2 USB stick appears to be in stock in the UK.
Product page:
On Wed, Feb 23, 2011 at 12:45 PM, Steve Kerrison
st...@stevekerrison.com wrote:
That would be me :)
I have indeed, but don't have much to speak of seeing as when I started
I'd never touched Linux kernel-space driver development.
At the moment I have hardware and usb data from myself and
This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date:Wed Feb 23 19:00:23 CET 2011
git master: 1b59be2a6cdcb5a12e18d8315c07c94a624de48f
git media-master: gcc version:
Hi Folks,
I bought a new Hauppauge WinTV USB 2 tuner card and was hoping to use it in
linux. I specifically looked up to find whether this card is supported or not,
and I found that it's indeed supported by em28xx drivers.
So i was hoping that this card would be autodetected and register all
On Wed, Feb 23, 2011 at 2:46 PM, Vivek Periaraj
vivek.peria...@gmail.com wrote:
Hi Folks,
I bought a new Hauppauge WinTV USB 2 tuner card and was hoping to use it in
linux. I specifically looked up to find whether this card is supported or not,
and I found that it's indeed supported by em28xx
On Wed, 2011-02-23 at 16:09 -0500, Devin Heitmueller wrote:
Hello there,
I was debugging some PAL issues with cx231xx, and noticed some
unexpected behavior with regards to selecting PAL standards.
In particular, tvtime has an option for PAL which corresponds to the
underlying value 0xff.
On Wed, Feb 23, 2011 at 4:53 PM, Andy Walls awa...@md.metrocast.net wrote:
When the standard set is ambiguous drivers may return EINVAL or choose
any of the requested standards.
Returning -EINVAL is really not desired behavior.
If you don't have standard autodetection before the DIF, your
Em 23-02-2011 18:09, Devin Heitmueller escreveu:
Hello there,
I was debugging some PAL issues with cx231xx, and noticed some
unexpected behavior with regards to selecting PAL standards.
In particular, tvtime has an option for PAL which corresponds to the
underlying value 0xff. This
Em 23-02-2011 18:26, Devin Heitmueller escreveu:
On Wed, Feb 23, 2011 at 4:25 PM, Vivek Periaraj
vivek.peria...@gmail.com wrote:
Hi Devin,
Thanks for the reply!
Like you advised, I took the latest code and started building it as mentioned
in this link --
On Wed, Feb 23, 2011 at 5:29 PM, Mauro Carvalho Chehab
mche...@redhat.com wrote:
Not all PAL standards. Only the european PAL standards (B/G/D/K/I/H):
Correct.
PAL/M, PAL/N, PAL/Nc and PAL/60 are not part of it. This is the equivalent
of the V4L1 definition for PAL (on V4L1, there was just
Em 23-02-2011 19:56, Devin Heitmueller escreveu:
However, the cx231xx has code for setting up the DIF which basically
says:
if (standard V4L2_STD_MN) {
...
} else if ((standard == V4L2_STD_PAL_I) |
(standard V4L2_STD_PAL_D) |
(standard
Hi,
Are there any 100% supported USB analog video capture devices for
V4L2? I'd like to be sure before I buy a device. All I require is RCA
and SVideo + onboard audio capture (i.e. no extra line in cable...)
I'm in Australia so devices that can be found via www.staticice.com.au
or ebay.com.au
Add I2C/V4L2 subdev driver for M-5MOLS camera sensor with integrated
image signal processor.
Signed-off-by: Heungjun Kim riverful@samsung.com
Signed-off-by: Sylwester Nawrocki s.nawro...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
Hello,
This is fifth version of
Hello,
I hope this patch. I missed 1 file, sorry.
I would submit another patch as the same name and same version.
Thanks,
Heungjun Kim
2011-02-23 오후 9:08, Kim, HeungJun 쓴 글:
Add I2C/V4L2 subdev driver for M-5MOLS camera sensor with integrated
image signal processor.
Signed-off-by:
40 matches
Mail list logo