On 01/20/2013 11:22 PM, Ondrej Zary wrote:
Allow disabling I2C gate handling by external configuration.
This is required by cards that have all devices on a single I2C bus,
like AverMedia A706.
My personal opinion is that I2C gate control should be disabled setting
callback to NULL (same for
On Monday 21 January 2013, Antti Palosaari wrote:
On 01/20/2013 11:22 PM, Ondrej Zary wrote:
Allow disabling I2C gate handling by external configuration.
This is required by cards that have all devices on a single I2C bus,
like AverMedia A706.
My personal opinion is that I2C gate control
Hi Sylwester!
On Sat January 19 2013 22:27:21 Sylwester Nawrocki wrote:
This patch adds a helper function that allows to modify range,
i.e. minimum, maximum, step and default value of a v4l2 control,
after the control has been created and initialized. This is helpful
in situations when range
On Sun January 20 2013 22:15:51 Frank Schäfer wrote:
Hi Hans,
I noticed that there's code in the v4l2 core that enables/disables
ioctls and checks some of the parameters depending on the device type.
While reading the code an comparing it to the V4L2 API document, some
more questions came
On Sat January 19 2013 22:27:20 Sylwester Nawrocki wrote:
Add common header file defining standard image sizes, so we can
avoid redefining those in each driver.
Signed-off-by: Sylwester Nawrocki sylvester.nawro...@gmail.com
---
include/media/image-sizes.h | 34
On 01/21/2013 10:18 AM, Ondrej Zary wrote:
On Monday 21 January 2013, Antti Palosaari wrote:
On 01/20/2013 11:22 PM, Ondrej Zary wrote:
Allow disabling I2C gate handling by external configuration.
This is required by cards that have all devices on a single I2C bus,
like AverMedia A706.
My
On Sat January 19 2013 22:27:22 Sylwester Nawrocki wrote:
This patch adds V4L2 sub-device driver for OV9650/OV9652 image sensors.
The driver exposes following V4L2 controls:
- auto/manual exposure,
- auto/manual white balance,
- auto/manual gain,
- brightness, saturation, sharpness,
-
On Sun January 20 2013 00:41:31 Peter Senna Tschudin wrote:
replace:
#if defined(CONFIG_MEDIA_TUNER_TEA5761) || \
defined(CONFIG_MEDIA_TUNER_TEA5761_MODULE)
with:
#if IS_ENABLED(CONFIG_MEDIA_TUNER_TEA5761)
This change was made for: CONFIG_MEDIA_TUNER_TEA5761
Also replaced:
#if
On Sat January 19 2013 22:38:13 Sylwester Nawrocki wrote:
All host drivers using this subdev driver are already converted
to use the control framework so the compatibility ops can be dropped.
Signed-off-by: Sylwester Nawrocki sylvester.nawro...@gmail.com
Acked-by: Hans Verkuil
On Thu January 17 2013 08:31:50 Jan Stumpf wrote:
Hi!
I'm trying to get an Hauppauge Live Usb 2 video grabber to run on on Omap4
(Gumstix Duovero). I'm using Sakomans omap-3.6 head kernel sources from
http://git.sakoman.com/git/gitweb.cgi?p=linux.git;a=summary . The hardware is
On Tue January 15 2013 08:55:40 Lad, Prabhakar wrote:
This patch removes the field description of fields that no
longer exists, along side aligns the field description of
fields.
Signed-off-by: Lad, Prabhakar prabhakar@ti.com
Acked-by: Hans Verkuil hans.verk...@cisco.com
Regards,
On Tue January 15 2013 09:00:53 Lad, Prabhakar wrote:
The current code was implemented with some default configurations,
this default configuration works on board and doesn't work on other.
This patch accepts the configuration through platform data and configures
the encoder depending on the
Hi,
On Monday 14 January 2013 15:22:55 Ezequiel Garcia wrote:
This kind of memcpy() is error-prone. Its replacement with a struct
assignment is prefered because it's type-safe and much easier to read.
Cc: Laurent Pinchart laurent.pinch...@ideasonboard.com
Signed-off-by: Peter Senna Tschudin
Hi William,
On Monday 14 January 2013 14:21:29 William Swanson wrote:
On 01/09/2013 02:35 PM, Laurent Pinchart wrote:
On Tuesday 08 January 2013 14:49:41 William Swanson wrote:
I believe the data is combined in a single buffer, with alternate fields
interleaved.
Could you please
Convert all uses of devm_request_and_ioremap() to the newly introduced
devm_ioremap_resource() which provides more consistent error handling.
devm_ioremap_resource() provides its own error messages so all explicit
error messages can be removed from the failure code paths.
Signed-off-by: Thierry
Hi Johannes,
On Friday 11 January 2013 16:00:19 Johannes Schellen wrote:
From: Johannes Schellen johannes.schel...@rwth-aachen.de
This patch fixes a bug which causes all histogram regions to start in the
top left corner of the image. The histogram region coordinates are 16 bit
values which
Hi Hans,
Thanks for the review!
On Mon, Jan 21, 2013 at 3:31 PM, Hans Verkuil hverk...@xs4all.nl wrote:
On Tue January 15 2013 09:00:53 Lad, Prabhakar wrote:
The current code was implemented with some default configurations,
this default configuration works on board and doesn't work on other.
On Thu January 3 2013 18:03:49 Sylwester Nawrocki wrote:
From: Guennadi Liakhovetski g.liakhovet...@gmx.de
This patch adds a document describing common OF bindings for video
capture, output and video processing devices. It is curently mainly
focused on video capture devices, with data busses
Those optional operations are used to release and reacquire the queue
lock when videobuf2 needs to perform operations that sleep for a long
time, such as waiting for a buffer to be complete. Implement them to
avoid blocking qbuf or streamoff calls when a dqbuf is in progress.
Signed-off-by:
Add conversion from videomode to drm_display_mode
Signed-off-by: Steffen Trumtrar s.trumt...@pengutronix.de
Reviewed-by: Thierry Reding thierry.red...@avionic-design.de
Acked-by: Thierry Reding thierry.red...@avionic-design.de
Tested-by: Thierry Reding thierry.red...@avionic-design.de
Tested-by:
Add helper to get fb_videomode from devicetree.
Signed-off-by: Steffen Trumtrar s.trumt...@pengutronix.de
Reviewed-by: Thierry Reding thierry.red...@avionic-design.de
Acked-by: Thierry Reding thierry.red...@avionic-design.de
Tested-by: Thierry Reding thierry.red...@avionic-design.de
Tested-by:
Add a function to convert from the generic videomode to a fb_videomode.
Signed-off-by: Steffen Trumtrar s.trumt...@pengutronix.de
Reviewed-by: Thierry Reding thierry.red...@avionic-design.de
Acked-by: Thierry Reding thierry.red...@avionic-design.de
Tested-by: Thierry Reding
This adds support for reading display timings from DT into a struct
display_timings. The of_display_timing implementation supports multiple
subnodes. All children are read into an array, that can be queried.
If no native mode is specified, the first subnode will be used.
For cases where the
Hi!
There was still no maintainer, that commented, ack'd, nack'd, apply'd the
series. So, this is just a resend.
The patches were tested with:
- v15 on Tegra by Thierry
- sh-mobile-lcdcfb by Laurent
- MX53QSB by Marek
- Exynos: smdk5250 by Leela
- AM335X
Add display_timing structure and the according helper functions. This allows
the description of a display via its supported timing parameters.
Also, add helper functions to convert from display timings to a generic
videomode
structure.
The struct display_timing specifies all needed parameters
The struct display_timing is specific to the via subsystem. The naming leads to
collisions with the new struct display_timing, which is supposed to be a shared
struct between different subsystems.
To clean this up, prepend the existing struct with the subsystem it is specific
to.
Signed-off-by:
Add helper to get drm_display_mode from devicetree.
Signed-off-by: Steffen Trumtrar s.trumt...@pengutronix.de
Reviewed-by: Thierry Reding thierry.red...@avionic-design.de
Acked-by: Thierry Reding thierry.red...@avionic-design.de
Tested-by: Thierry Reding thierry.red...@avionic-design.de
Hi Mauro,
The following changes since commit 3151d14aa6e983aa36d51a80d0477859f9ba12af:
[media] media: remove __dev* annotations (2013-01-11 13:03:24 -0200)
are available in the git repository at:
git://linuxtv.org/pinchartl/uvcvideo.git uvcvideo-next
Ezequiel Garcia (1):
uvcvideo:
Hi Andrzej,
On Tuesday 15 January 2013 15:34:47 Andrzej Hajda wrote:
On 12.01.2013 23:05, Sakari Ailus wrote:
Andrzej Hajda wrote:
Hi,
I have included this proposition already in the post [PATCH RFC 0/2]
V4L: Add auto focus area control and selection but it left unanswered.
I repost
Hi,
ov7670 and ov7675 sensors have the possibility of querying the average
value of the Y/Cb components of the image reading a register. This
could be useful for applications such as calise [1]. This program
grabs frames from a video camera, calculates the average brightness
and then adjusts
Hi Sylwester,
Just two comments...
On Thu January 3 2013 18:09:22 Sylwester Nawrocki wrote:
From: Guennadi Liakhovetski g.liakhovet...@gmx.de
Add a V4L2 OF parser, implementing bindings documented in
Documentation/devicetree/bindings/media/video-interfaces.txt.
Signed-off-by: Guennadi
Hi,
Thanks for the patches I'll pick up 5 - 21 and add them to
my tree for Mauro.
Regards,
Hans
On 01/19/2013 05:33 PM, Peter Senna Tschudin wrote:
replace:
#if defined(CONFIG_VIDEO_CX88_DVB) || \
defined(CONFIG_VIDEO_CX88_DVB_MODULE)
with:
#if IS_ENABLED(CONFIG_VIDEO_CX88_DVB)
On Mon, Jan 21, 2013 at 10:47 AM, Hans de Goede hdego...@redhat.com wrote:
Hi,
Thanks for the patches I'll pick up 5 - 21 and add them to
my tree for Mauro.
I have sent V2 of this patches with another subject and with fixed
commit message for two patches.
Regards,
Hans
On 01/19/2013
Hi Mike,
On Monday 14 January 2013 17:10:15 Mike Turquette wrote:
Quoting Laurent Pinchart (2013-01-08 05:43:52)
Hello,
Now that the OMAP3 supports the common clock framework, clock rate
back-propagation is available for the ISP clocks. Instead of setting the
cam_mclk parent clock
Em Sun, 20 Jan 2013 14:07:07 +0100
Frank Schäfer fschaefer@googlemail.com escreveu:
Hi Mauro,
the patches 16225, 16231, 16232 at patchwork are superseeded:
pwclient update -s 'superseded' 16225
pwclient update -s 'superseded' 16231
pwclient update -s 'superseded' 16232
Updated.
Hi,
From: Sakari Ailus [mailto:sakari.ai...@iki.fi]
Sent: Saturday, January 19, 2013 6:43 PM
Hi Kamil,
Thanks for the patch.
On Mon, Jan 14, 2013 at 10:36:04AM +0100, Kamil Debski wrote:
Set proper timestamp type in drivers that I am sure that use either
MONOTONIC or COPY timestamps.
After updating the kernel on Fedora 18 module dvb-usb-it913x seems to
have dissapeared.
This has meant my dvb stick ( ID 1b80:e409 Afatech IT9137FN Dual DVB-T
[KWorld UB499-2T]) no longer works
Is this a Redhat only thing or is it upstream
--
To unsubscribe from this list: send the line
I know this comes late, but we have a number of broken
configurations in ARM in v3.8 that were still building
in v3.7, and I'd like to get them all fixed in the
final 3.8 release.
It would be nice if the respective maintainers could
have a look at these patches and apply them directly
when they
38 matches
Mail list logo