Добрый день, Вам нужен срочный кредит, чтобы купить дом или оплатить
счета или Xmas кредит, если да, свяжитесь с нами со следующей
информацией по адресу:? 3% ставке.
Имя заявителя (Ф.И.О.):
Пол: ...
Требуется Сумма кредита :.
Кредит Продолжительность :.
Цель займа :.
Ежемесячный доход :.
телефонны
This message is generated daily by a cron job that builds media_tree for
the kernels and architectures in the list below.
Results of the daily build of media_tree:
date: Fri Nov 21 04:00:14 CET 2014
git branch: test
git hash: c02ef64aab828d80040b5dce934729312e698c33
gcc versio
Hello Chris,
Do all of your transponders have such issue or only some special transponders?
Could you list the parameters for them? for example, dvb-s or dvb-s2 type,
frequency, symbol rate.
The dvbsky.net firmware "dvb-fe-ds3103.fw" is version 3.7.
Annti uses the firmware "dvb-demod-m88ds3103.f
Hi Hans,
On Fri, Nov 21, 2014 at 2:55 AM, Hans de Goede wrote:
> On sun6i the cir block is attached to the reset controller, add support
> for de-asserting the reset if a reset controller is specified in dt.
>
> Signed-off-by: Hans de Goede
> ---
> drivers/media/rc/sunxi-cir.c | 25
No need, because si214x is same si215x without analog filter path.
20.11.2014, 22:10, "Olli Salonen" :
> Crazycat, do you think you could change the firmware loading for Si2148
> as discussed here though and send a new patch?
--
To unsubscribe from this list: send the line "unsubscribe linux-media
The toggle bit shouldn't be cleared before the toggle value is calculated.
This should probably go into 3.17.x as well.
Fixes: 120703f9eb32 ([media] rc-core: document the protocol type)
Tested-by: Stephan Raue
Signed-off-by: David Härdeman
Cc: sta...@vger.kernel.org
---
drivers/media/rc/ir-rc6
Dear Sir
Did your website get hit by Google Penguin update on October 17th 2014? What
basically is Google Penguin Update? It is actually a code name for Google
algorithm which aims at decreasing your websites search engine rankings that
violate Googles guidelines by using black hat SEO techniq
When new parameters are added for si2168 driver, the parameters have to be
explicitly defined for each device if the
si2168_config struct is not initialized to all zeros.
Signed-off-by: Olli Salonen
---
drivers/media/usb/dvb-usb/cxusb.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drive
When new parameters are added for si2168 driver, the parameters have to be
explicitly defined for each device if the
si2168_config struct is not initialized to all zeros.
Signed-off-by: Olli Salonen
---
drivers/media/usb/dvb-usb-v2/af9035.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/dr
When new parameters are added for si2168 driver, the parameters have to be
explicitly defined for each device if the
si2168_config struct is not initialized to all zeros.
Signed-off-by: Olli Salonen
---
drivers/media/usb/em28xx/em28xx-dvb.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/dr
Hi,
On 11/20/2014 04:31 PM, Gregor Jasny wrote:
> Hello,
>
> do you consider something from these commits as important enough for a bugfix
> release?
>
>> Hans de Goede (2):
>> rc_keymaps: allwinner: S/KEY_HOME/KEY_HOMEPAGE/
>> v4lconvert: Fix decoding of jpeg data with no vertic
On Mon, 17 Nov 2014, Michael Holzer wrote:
I'd see merit to show the supported chips explicitly as otherwise users
may be confused if a new unsupported chip (lets assume Si2159)
appears and the message is generic as proposed "Si215x".
To get clarity for this case source code reading would be re
Reviewed-by: Olli Salonen
On Fri, 14 Nov 2014, CrazyCat wrote:
Geniatech Mygica T230 DVB-T/T2/C USB stick support.
Signed-off-by: Evgeny Plehov
---
drivers/media/dvb-core/dvb-usb-ids.h | 1 +
drivers/media/usb/dvb-usb/cxusb.c| 127 +++
2 files changed, 128
Reviewed-by: Olli Salonen
On Fri, 14 Nov 2014, CrazyCat wrote:
TS clock polarity control implemented.
Signed-off-by: Evgeny Plehov
---
drivers/media/dvb-frontends/si2168.c | 7 +--
drivers/media/dvb-frontends/si2168.h | 4
drivers/media/dvb-frontends/si2168_priv.h | 1 +
3 fi
Hi Max,
I think this is ok. In the nearby future, would be good to move TT
CT2-4650 CI support to the dvbsky driver as that one is a rebadged T680CI
anyway. If you will add T330 support as well, we could move CT2-4400 too..
Reviewed-by: Olli Salonen
Cheers,
-olli
On Thu, 13 Nov 2014, Nibbl
On Wed, 19 Nov 2014, Éder Zsolt wrote:
Hi,
I found at the site: http://www.linuxtv.org/wiki/index.php/ATSC_PCIe_Cards
that if I have a TV-tuner card which is currently unsupported, you may help
me how I can make workable this device.
I have an Asus MyCinema EHD3-100/NAQ/FM/AV/MCE RC dual TV
Hi,
On 11/20/2014 07:24 PM, Chen-Yu Tsai wrote:
> Hi,
>
> On Thu, Nov 20, 2014 at 7:55 AM, Hans de Goede wrote:
>> Add a driver for mod0 clocks found in the prcm. Currently there is only
>> one mod0 clocks in the prcm, the ir clock.
>>
>> Signed-off-by: Hans de Goede
>> ---
>> Documentation/de
Hi,
On Thu, Nov 20, 2014 at 7:55 AM, Hans de Goede wrote:
> Add a driver for mod0 clocks found in the prcm. Currently there is only
> one mod0 clocks in the prcm, the ir clock.
>
> Signed-off-by: Hans de Goede
> ---
> Documentation/devicetree/bindings/clock/sunxi.txt | 1 +
> drivers/clk/sunxi
Em Thu, 20 Nov 2014 16:55:24 +0100
Hans de Goede escreveu:
> Add support for the larger fifo found on sun5i and sun6i, having a separate
> compatible for the ir found on sun5i & sun6i also is useful if we ever want
> to add ir transmit support, because the sun5i & sun6i version do not have
> tran
Em Thu, 20 Nov 2014 16:55:23 +0100
Hans de Goede escreveu:
> On sun6i the cir block is attached to the reset controller, add support
> for de-asserting the reset if a reset controller is specified in dt.
>
> Signed-off-by: Hans de Goede
As this is meant to be merged via some other tree:
Acked
Em Thu, 20 Nov 2014 16:31:09 +0100
Gregor Jasny escreveu:
> Hello,
>
> do you consider something from these commits as important enough for a
> bugfix release?
>From my side, those are bug fixes that affect two RC6 tables:
ir-keytable: fix a regression introduced by fe2aa5f767eba
On sun6i the cir block is attached to the reset controller, add support
for de-asserting the reset if a reset controller is specified in dt.
Signed-off-by: Hans de Goede
---
drivers/media/rc/sunxi-cir.c | 25 +++--
1 file changed, 23 insertions(+), 2 deletions(-)
diff --git
The Mele M9 has an ir receiver, enable it.
Signed-off-by: Hans de Goede
---
arch/arm/boot/dts/sun6i-a31-m9.dts | 6 ++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts
b/arch/arm/boot/dts/sun6i-a31-m9.dts
index 4202c64..94ddf9c 100644
--- a/arch/arm/boot/dts/
Add an ir_clk sub-node to the prcm node.
Signed-off-by: Hans de Goede
---
arch/arm/boot/dts/sun6i-a31.dtsi | 7 +++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index a01b215..4aa628b 100644
--- a/arch/arm/boot/dts/sun6i-a3
Add a driver for mod0 clocks found in the prcm. Currently there is only
one mod0 clocks in the prcm, the ir clock.
Signed-off-by: Hans de Goede
---
Documentation/devicetree/bindings/clock/sunxi.txt | 1 +
drivers/clk/sunxi/Makefile| 2 +-
drivers/clk/sunxi/clk-sun6i-prc
Add a node for the ir receiver found on the A31.
Signed-off-by: Hans de Goede
---
arch/arm/boot/dts/sun6i-a31.dtsi | 10 ++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 4aa628b..d33e758 100644
--- a/arch/arm/boot
Add pinmux settings for the ir receive pin of the A31.
Signed-off-by: Hans de Goede
---
arch/arm/boot/dts/sun6i-a31.dtsi | 7 +++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index d33e758..90b7537 100644
--- a/arch/arm/boo
Add support for the larger fifo found on sun5i and sun6i, having a separate
compatible for the ir found on sun5i & sun6i also is useful if we ever want
to add ir transmit support, because the sun5i & sun6i version do not have
transmit support.
Note this commits also adds checking for the end-of-pa
Before this commit sunxi_factors_register uses of_iomap(node, 0) to get
the clk registers. The sun6i prcm has factor clocks, for which we want to
use sunxi_factors_register, but of_iomap(node, 0) does not work for the prcm
factor clocks, because the prcm uses the mfd framework, so the registers
are
Hi Maxime, et al,
Here is a patch series adding support for the ir receiver found on sun6i,
it is the same one as found on sun5i (which is very similar to the sun4i
one we already support), except that as usual on sun6i it needs a reset
to be de-asserted.
More interesting is the clocking of it, i
The sun6i prcm has mod0 compatible clocks, these need a separate driver
because the prcm uses the mfd framework, but we do want to re-use the
standard mod0 clk handling from clk-mod0.c for this, export
sun4i_a10_mod0_data, so that the prcm mod0 clk driver can use this.
Signed-off-by: Hans de Goede
Hello,
do you consider something from these commits as important enough for a
bugfix release?
Thanks,
Gregor
Akihiro Tsukada (9):
libdvbv5, dvbv5-scan: generalize channel duplication check
libdvbv5: add as many channels as possible in scanning DVB-T2
libdvbv5: wrong frequen
On Nov 20 SF Markus Elfring wrote:
> From: Markus Elfring
> Date: Thu, 20 Nov 2014 10:49:07 +0100
>
> The dvb_unregister_device() function tests whether its argument is NULL
> and then returns immediately. Thus the test around the call is not needed.
>
> This issue was detected by using the Cocc
Hello,
I yust checked the SNR Level the DVBSky-Card providing with the
drivers from dvbsky.net (media_build-bst-14-141106):
# ./femon -a 0
using '/dev/dvb/adapter0/frontend0'
FE: Montage DS3103/TS2022 (SAT)
status 1f | signal 7323 | snr b064 | ber | unc |
FE_HAS_LOCK
# ./femon
Hi Pavel,
On 11/20/2014 01:12 PM, Pavel Machek wrote:
Hi!
I would also swap the segments of a property name to follow the convention
as in case of "regulator-max-microamp".
Updated version:
==
Optional properties for child nodes:
- max
On Mon, Nov 17, 2014 at 12:59:09PM -0200, Mauro Carvalho Chehab wrote:
> Em Sun, 9 Nov 2014 21:35:17 +
> Sean Young escreveu:
>
> > On Thu, Nov 06, 2014 at 08:56:47AM -0500, Andy Walls wrote:
> > > On November 6, 2014 8:54:28 AM EST, Andy Walls
> > > wrote:
> > > >Sean,
> > > >
> > > >Ir-kb
On 11/19/2014 10:45 AM, Jacek Anaszewski wrote:
Hi Pavel, Sakari,
On 11/18/2014 05:51 PM, Pavel Machek wrote:
Hi!
If the hardware LED changes with one that needs different current, the
block for the adp1653 stays the same, but white LED block should be
updated with different value.
I think
From: Markus Elfring
Date: Thu, 20 Nov 2014 13:26:36 +0100
The functions pvr2_hdw_destroy(), rc_unregister_device() and vfree() perform
also input parameter validation. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus E
Hi!
> >> But regulators already have "regulator-max-microamp" property. So what
> >> about:
> >>
> >> max-microamp : maximum intensity in microamperes of the LED
> >> (torch LED for flash devices)
> >> max-flash-microamp : initial intensity in microamperes of the
> >>
Hi!
> I would also swap the segments of a property name to follow the convention
> as in case of "regulator-max-microamp".
>
> Updated version:
>
> ==
>
> Optional properties for child nodes:
> - max-microamp : maximum intensity in microam
From: Markus Elfring
Date: Thu, 20 Nov 2014 13:01:32 +0100
The functions input_free_device() and rc_close() test whether their argument
is NULL and then return immediately. Thus the test around the call
is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Mark
From: Markus Elfring
Date: Thu, 20 Nov 2014 11:44:20 +0100
The functions i2c_put_adapter() and release_firmware() test whether their
argument is NULL and then return immediately. Thus the test around the call
is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by
Hi Sakari,
On 11/20/2014 10:36 AM, Sakari Ailus wrote:
Hi Jacek,
Thank you for your thoughtful writing on the subject.
I am just doing my best to bring it to a successful end :)
Jacek Anaszewski wrote:
Hi Sakari,
On 09/22/2014 05:21 PM, Jacek Anaszewski wrote:
This patch adds helper func
From: Markus Elfring
Date: Thu, 20 Nov 2014 11:13:16 +0100
The rc_unregister_device() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring
-
From: Markus Elfring
Date: Thu, 20 Nov 2014 10:49:07 +0100
The dvb_unregister_device() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring
Hi Jacek,
Thank you for your thoughtful writing on the subject.
Jacek Anaszewski wrote:
> Hi Sakari,
>
> On 09/22/2014 05:21 PM, Jacek Anaszewski wrote:
>> This patch adds helper functions for registering/unregistering
>> LED class flash devices as V4L2 subdevs. The functions should
>> be called
Hi Pavel, Sakari,
On 11/19/2014 06:53 PM, Sakari Ailus wrote:
Hi Jacek and Pavel,
Jacek Anaszewski wrote:
Hi Pavel, Sakari,
On 11/18/2014 05:51 PM, Pavel Machek wrote:
Hi!
If the hardware LED changes with one that needs different current, the
block for the adp1653 stays the same, but white
From: Markus Elfring
Date: Wed, 19 Nov 2014 23:23:15 +0100
The release_firmware() function was called in some cases by the
si2168_init() function during error handling even if the passed variable
contained still a null pointer. This implementation detail could be improved
by the introduction of a
From: Markus Elfring
Date: Wed, 19 Nov 2014 22:27:24 +0100
The release_firmware() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring
---
From: Markus Elfring
Date: Wed, 19 Nov 2014 23:20:51 +0100
The release_firmware() function was called in some cases by the
m88ds3103_init() function during error handling even if the passed variable
contained still a null pointer. This implementation detail could be improved
by the introduction o
From: Markus Elfring
Date: Wed, 19 Nov 2014 23:30:37 +0100
Another update suggestion was taken into account after a patch was applied
from static source code analysis.
Markus Elfring (3):
DVB-frontends: Deletion of unnecessary checks before the function
call "release_firmware"
m88ds3103:
51 matches
Mail list logo