Here are the files since I forgot to attach them in my last e-mail.
Thanks,
Franklin Meng
decode.tar.gz
Description: application/gzip
I was wondering if someone would be able to help me with getting the analog and
inputs for the Kworld 315U working. I was able to get the digital part working
with help from Douglas Schilling and wanted to get the remaining portions of
the device working.
I have traces but have not made much
frame?
I am begging help 'cause my arsenal's over.. I am really out of ideas!
Thanks a lot!
_
Drag n’ drop—Get easy photo sharing with Windows Live™ Photos.
http://www.microsoft.com/windows/windowslive/products/photos.aspx
. It is not based on MPEG2 transport steam live DVB-T or ISDB-T.
Regards,
Yaron
-Original Message-
From: Shine Liu [mailto:liux...@redflag-linux.com]
Sent: Thursday, September 03, 2009 5:20 AM
To: Uri Shkolnik
Cc: linux-media@vger.kernel.org
Subject: [DVB] Siano: Request help for some unkown SMS
be for CMMB. I want to know the messages format and what
these header ID mean but I can't find these definations in current siano
source code. Could you give me some help on this?
Best regards,
Shine
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body
this by inserted
the IR receiver, I tried but it still doesn't work.
is this a mythtv problem or cxusb issue?
Please help, any pointers appreciated.
regards,
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More
On Thu, 20 Aug 2009 06:50:25 +0800
treblid treb...@gmail.com wrote:
On Wed, Aug 19, 2009 at 3:02 PM, Bob Hepplebhep...@promptu.com wrote:
2.6.27 worked for me - exact same board (ignoring revisions - mine is
an older board, rev.1, I think)
Mine is rev 1 too, I think.. :p
2.6.28 and up
?
Please help, any pointers appreciated.
regards,
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
.
Ok.
Douglas, in a few minutes I am leaving town for the next five
days. Can you help Xwang out to restore his eeprom content using
your tool?
Sure Devin.
Cheers,
Douglas
--
To unsubscribe from this list: send the line unsubscribe
linux-media in the body of a message
-005c: tvp5150am1 detected.
I searched the net for the error messages
zl10353_read_register: readreg error (reg=127, ret==-19)
and
em28xx #0/2: dvb frontend not attached. Can't attach xc3028
but that wasn't very helpful. Is there anybody, who can give me a hint?
Where is my mistake? Any help
On Fri, Aug 7, 2009 at 6:24 AM, xwang1...@email.it wrote:
Just a little addendum.
I remember that the audio of analog tv has started to work with Markus'
drivers when he added the em28xx-audioep driver because, if I have correctly
understood, my device has a noy standard audio.
Is it
On Thu, Aug 6, 2009 at 9:54 AM, xwang1...@email.it wrote:
Hi,
I want to inform you that thanks to Douglas Schilling Landgraf, the first
point (automatic recognition of the device when plugged in) ha been resolved
(using his development tree driver).
I've tried to scan for digital channels
Ok,
I've made the change and now the digital tv works perfectly.
So now I should test the analog tv, but I fear to have another kernel panic.
Is there something I can do before testing so that to be sure that at
least all the file system are in a safety condition even if a kernel
panic happens.
On Thu, Aug 6, 2009 at 11:16 AM, xwang1...@email.it wrote:
Ok,
I've made the change and now the digital tv works perfectly.
So now I should test the analog tv, but I fear to have another kernel panic.
Is there something I can do before testing so that to be sure that at least
all the file
Hi,
Thanks for the help so far. I did a hg clone of the latest v4l-dvb
repository, built, installed, rebooted a few times, and did the
modprobe below, but unfortunately I still can't lock:
Here's the scan output:
$ sudo ../scan -vvv test
scanning test
using '/dev/dvb/adapter0/frontend0
On 26 июля 2009 01:12:14 Shaun Murdoch wrote:
Hi Igor,
I've taken some photos of the tuner so that hopefully you'll be able
to help work out why it won't tune in Linux.
Please see the following link for the images:
http://www.flickr.com/photos/7690...@n04/sets/72157621703527801/
I have
Hi Igor,
I've taken some photos of the tuner so that hopefully you'll be able
to help work out why it won't tune in Linux.
Please see the following link for the images:
http://www.flickr.com/photos/7690...@n04/sets/72157621703527801/
The only chip on display is:
SDMC
DM1105N
D735 E280034
Also
Shaun Murdoch wrote:
Hi everyone,
First post so please be gentle :-)
I was wondering if anyone can help me please - I am trying to get a
DVB-S PCI card working with Linux (Ubuntu 9.04). So far I can get the
card recognised by Linux, but it won't tune - Kaffeine does tell me
that there is 95
/23 Simon Kenyon si...@koala.ie:
Shaun Murdoch wrote:
Hi everyone,
First post so please be gentle :-)
I was wondering if anyone can help me please - I am trying to get a DVB-S
PCI card working with Linux (Ubuntu 9.04). So far I can get the card
recognised by Linux, but it won't tune
Hi everyone,
First post so please be gentle :-)
I was wondering if anyone can help me please - I am trying to get a
DVB-S PCI card working with Linux (Ubuntu 9.04). So far I can get the
card recognised by Linux, but it won't tune - Kaffeine does tell me
that there is 95% signal and 80% SNR
Hi everyone,
First post so please be gentle :-) [Resending to this list as
linux-dvb is deprecated apparently and I wasn't a member of
linux-media. Apologies if this gets to you multiple times.]
I was wondering if anyone can help me please - I am trying to get a
DVB-S PCI card working
Murdoch scra...@gmail.com
Hi everyone,
First post so please be gentle :-)
I was wondering if anyone can help me please - I am trying to get a DVB-S PCI
card working with Linux (Ubuntu 9.04). So far I can get the card recognised
by Linux, but it won't tune - Kaffeine does tell me
the
frequency to interpret as : 1,177,800 MHz !!!
2009/7/22 Shaun Murdoch scra...@gmail.com
Hi everyone,
First post so please be gentle :-)
I was wondering if anyone can help me please - I am trying to get a DVB-S
PCI card working with Linux (Ubuntu 9.04). So far I can get the card
in which the frequency parameters has two extra zeros which cause the
frequency to interpret as : 1,177,800 MHz !!!
2009/7/22 Shaun Murdoch scra...@gmail.com
Hi everyone,
First post so please be gentle :-)
I was wondering if anyone can help me please - I am trying to get a
DVB-S PCI
everyone,
First post so please be gentle :-)
I was wondering if anyone can help me please - I am trying to get a
DVB-S PCI card working with Linux (Ubuntu 9.04). So far I can get the
card recognised by Linux, but it won't tune - Kaffeine does tell me that
there is 95% signal and 80% SNR, and I
(Dropped Sameer and Mohit from Cc.)
John Sarman wrote:
Hello,
Hi,
I am having a problem deciphering what is wrong with my sensor
driver. It seems that everything operates on the driver but that I am
getting buffer overflows. I have fully tested the image sensor and it
is set to operate
Sakari,
My images are not so pretty yet, but that is because I haven't set any
real configuration on the image sensor yet. First I would like to get
the data streaming to the framebuffer. That will allow me to focus the
image, then I will start applying the i2c calls needed. Also I have
an idea
Hello,
I am having a problem deciphering what is wrong with my sensor
driver. It seems that everything operates on the driver but that I am
getting buffer overflows. I have fully tested the image sensor and it
is set to operate in 640x480 mode. currently it is like 648x 487 for
the dummy
; Tuukka Toivonen; linux-media
Subject: Help bringing up a sensor driver for isp omap34xx.c
Hello,
I am having a problem deciphering what is wrong with my sensor
driver. It seems that everything operates on the driver but that I am
getting buffer overflows. I have fully tested the image
Hi,
With the huge help of Hermann, I managed to implement this remote with
it's new card Compro VideoMate Vista T750F card=169 (just a copy of T750
with a diff keymap). I successfully compiled v4l and managed to get this
remote to work.
I need some help on mapping specific MCE buttons
I am currently creating a camera driver for an omap3530 processor
based on omap3 camera support. I have it successfully configuring my
camera and /dev/video0 shows up. However when I try to open the
device using any program( xawtv , cat, etc.) The system soft locks.
What I am trying to do is
for the chip was committed last year, but I don't see any drivers
actually using it.
Does anyone have any documentation for the chip, or even better, some examples
of how to set it up for a driver. Also I don't know how to find their I2C
addresses.
Thanks for any help in advance
their I2C addresses.
Thanks for any help in advance.
Work was recently done for lgdt3304 support for the K-World 330u by
Jarod Wilson and Michael Krufky. That work should be making its way
into the mainline driver soon.
Cheers,
Devin
--
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
. radio is not working . analog TV
seems to be working (very poor antenna, hard to say)
in 2.6.26 (and later, up to 2.6.30)
composite input is working, DVB is not working (tzap does not lock),
radio is not working (don't remember for analog TV). dmesg warns about
parity error.
any help would
Hi !
I've modified the sources of a 2.6.29 kernel to try to have my
Terratec Hybrid usb key working in DVB-T mode.
Basically I modified em28xx-cards.c, and used the settings of a WINTV
HVR-900 for my card.
[EM2882_BOARD_TERRATEC_HYBRID_XS] = {
.name = Terratec
Hi again,
Am Dienstag, den 05.05.2009, 21:33 +0200 schrieb Lars Oliver Hansen:
So I would have instead of a wrapped call to a non-existant snd_card_new
a direct call to an exported snd_card_create.
me adding snd_card_create to the Ubuntu sources (headers to be precise)
obviously means it
a direct call to an exported snd_card_create.
Unfortunately I get this in dmesg now:
saa7134_alsa: no symbol version for snd_card_create
[ 4383.422044] saa7134_alsa: Unknown symbol snd_card_create
What can I do now?
Any help?
Thanks!
Best Regards
Lars
--
To unsubscribe from this list: send
saMmapLoopback.c, it runs, however, it receives only HS_VS_IRQ, but
no any image data. I checked FLDSTAT(CCDC_SYN_MODE), it's never
changed. Right now, I don't know what to check, if you can give some
suggestions, your help will be greatly appreciated. Thanks in
advance.
I haven't been using
, it runs, however, it
receives only HS_VS_IRQ, but no any image data. I checked
FLDSTAT(CCDC_SYN_MODE), it's never changed.
Right now, I don't know what to check, if you can give some suggestions, your
help will be greatly appreciated. Thanks in advance.
Wending Weng
--
To unsubscribe from
, cam_hs and cam_vs are
also connected, At the omap3 side, I use saMmapLoopback.c, it runs, however,
it receives only HS_VS_IRQ, but no any image data. I checked
FLDSTAT(CCDC_SYN_MODE), it's never changed.
Right now, I don't know what to check, if you can give some suggestions, your
help
-media@vger.kernel.org
Subject: need help for omap3 isp-camera interface
Hi All,
I'm working on video image capture(omap3 isp) interface(PSP
1.0.2), and have met many difficulties. At the camera side, the 8
bits BT656 signal are connected to cam_d[0-7], which looks OK. The
cam_fld, cam_hs
Hi. Maybe this code will help.
This driver registers new adapter, demux and frontend. It also
registers char devices /dev/dvbstubi[0-9]. This devices should be used
for writing raw TS stream. Stream will be processed by dvb-core
internals.
Module has one parameter - baudrate, to prevent overflows
301 - 342 of 342 matches
Mail list logo