Madhusudhan wrote:
>
>
>> -Original Message-
>> From: svenk...@gmail.com [mailto:svenk...@gmail.com] On Behalf Of
>> Venkatraman S
>> Sent: Thursday, March 11, 2010 11:43 AM
>> To: Madhusudhan
>> Cc: linux-mmc@vger.kernel.org; linux-arm-ker...@lists.infradead.org;
>> linux-o...@vger.kernel.
MMC 4.4 Spec JEDEC Standard No. 84-A44 says CMD1 response from card
has bit 30 set if card is high capacity. (page 111 - Section 8.1)
Toshiba flash <= 2GB has EXT_CSD sectors but does not support
High Capacity but because of bad test -- card was put into sector mode
causing failure.
Signed-off-b
This is a note to let you know that we have just queued up the patch titled
Subject: s3cmci: s3cmci_card_present: Use no_detect to decide whether there
is a card detect pin
to the 2.6.32-stable tree. Its filename is
s3cmci-s3cmci_card_present-use-no_detect-to-decide-whether-there-is-
This is a note to let you know that we have just queued up the patch titled
Subject: s3cmci: initialize default platform data no_wprotect and no_detect
with 1
to the 2.6.32-stable tree. Its filename is
s3cmci-initialize-default-platform-data-no_wprotect-and-no_detect-with-1.patch
A
This is a note to let you know that we have just queued up the patch titled
Subject: s3cmci: s3cmci_card_present: Use no_detect to decide whether there
is a card detect pin
to the 2.6.33-stable tree. Its filename is
s3cmci-s3cmci_card_present-use-no_detect-to-decide-whether-there-is-
This is a note to let you know that we have just queued up the patch titled
Subject: s3cmci: initialize default platform data no_wprotect and no_detect
with 1
to the 2.6.33-stable tree. Its filename is
s3cmci-initialize-default-platform-data-no_wprotect-and-no_detect-with-1.patch
A