Greetings: You were right - I needed two modules.. I found the
easiest was to use the isp16.i boot disk to take care of the sound
card/interface and then during the installation run 'insmod' with
'sjcd.o' on a floppy transferring both to the ramdisk.. Setup didn't
like it, at first, but on the 2nd
On 03-30, Boris Bezlaj wrote:
> On Sun, Mar 30, 2003 at 01:29:29PM -0500, Hal MacArgle wrote:
> > Greetings and thanks for your input..
> >
> > I'm still stuck.. I found the bootdisk 'isp16', the name of the
> > soundcard/cd-interface, and it found the drive at the proper port:
> > 0x340.. But it
On 03-30, Chuck Gelm wrote:
> Hi, Hal:
>
> If you are going to receive suggestions from me,
> we need to keep this discussion 'on the list'.
> I prefer to respond here, on the linux-newbie list,
> where others can spot my mistakes and correct them
> before they harm others. :-|
On Sun, Mar 30, 2003 at 01:29:29PM -0500, Hal MacArgle wrote:
> Greetings and thanks for your input..
>
> I'm still stuck.. I found the bootdisk 'isp16', the name of the
> soundcard/cd-interface, and it found the drive at the proper port:
> 0x340.. But it still wont mount the drive either as /dev
Hi, Hal:
If you are going to receive suggestions from me,
we need to keep this discussion 'on the list'.
I prefer to respond here, on the linux-newbie list,
where others can spot my mistakes and correct them
before they harm others. :-|
There seems to me to be several separate topics
that you
Hi, Hal:
OBTW, about that VectorLinux suggestion working on older machines,
I have Slackware v8.0 installed on a Compaq Delinea 4/33.
80486dx33 with 32 Megabytes of RAM and a Maxtor 40 gigabyte HD.
Its bios date is February 1992. It has no CD drive. I did
a 'nfs' install via an 80586x120 on my
On Fri, 28 Mar 2003, Hal MacArgle wrote:
> Greetings: Trying to install Slackware 8.0 in a AM586-P75 box with
> 32mB RAM - I can't find the magic entry/ies to install the packages
> from the CD.. The CD is working OK from the Dos5.0 partition of
> course. :^)..
>
Hal:
I can't help much on the CD
Greetings: Trying to install Slackware 8.0 in a AM586-P75 box with
32mB RAM - I can't find the magic entry/ies to install the packages
from the CD.. The CD is working OK from the Dos5.0 partition of
course. :^)..
I've tried the Slackware boot image - sanyo.i - from both the 8.0 and
7.1 distributio
