hi,
i currently dont have any GUI on it. But the display is turned on as
am able to see the linux logo and also able to write characters to the
lcd.
i would like to add here that i DID NOT get
[*] Touchscreens
<*> OMAP touchscreen input driver "
but instead i enabled the ADS7846 touchscreen. A
hi,
i currently dont have any GUI on it. But the display is turned on as
am able to see the linux logo and also able to write characters to the
lcd.
regards,
Shareef
On Tue, May 27, 2008 at 11:07 AM, Abraham Arce
<[EMAIL PROTECTED]> wrote:
> Shareef,
>
> Any feature that turns off the display so
Shareef,
Any feature that turns off the display some time after boot up?
If you execute Xfbdev, are you able to see the X cursor?
If you execute Xfbdev in background and then start ts_calibrate, what
do you get in display and serial port?
Best Regards
Abraham
On Tue, May 27, 2008 at 12:32 AM,
Hi ,
Make the following change :
1) In the "ts.conf" file make sure "module_raw input" is uncommented .
2) export TSLIB_CONSOLEDEVICE=none
Thanks and Regards
rajeev
- Original Message -
From: "mohammed shareef" <[EMAIL PROTECTED]>
To: "Abraham Arce" <[EMAIL PROTECTED]>
Cc: "omap"
Dear Abraham,
I am not receiving any error nor any messages on the LCD.. i have
added the following environment variables:
export TSLIB_TSDEVICE=/dev/input/event1
export TSLIB_CONFFILE=/etc/ts.conf
export TSLIB_CONSOLEDEVICE=/dev/ttyS0
export TSLIB_FBDEVICE=/dev/fb0
export TSLIB_PLUGINDIR=/usr/li
Hi Everyone,
I'm new to this, and probably this is a very basic problem, but I'm
still stuck with it so maybe someone can help.
I'm following the dspusersguide for CCS debugging with osk5912 and
JTAG emulator.
I can't seem to build the dsplinkmsg.pjt... here is an extract from
the log (the first l
On 5/26/08, mohammed shareef <[EMAIL PROTECTED]> wrote:
> Dear All,
>
> i cross-compiled the tslib for my filesystem as mentioned in:
> http://linux.omap.com/pipermail/linux-omap-open-source/2005-March/003174.html
>
> and i have put the executables in the filesystem.
> when i do
> /usr/X11/bin/ts_c
Hi *,
Sorry for bothering all of you with my problem again.
I've asked it in [EMAIL PROTECTED] but have not got
some working solution. Maybe here somebody could help me.
I write an SDIO driver on OMAP 2430SDP platform.
I have three questions related to MMC subsystem:
1. When I issue sdio_w
