RedHat has a lot of patched in the kernel already. Take a look at the
kernel source RPMs.
Greg
> -Original Message-
> From: Edward Schernau [mailto:[EMAIL PROTECTED]]
> Sent: Saturday, May 06, 2000 12:20 PM
> To: [EMAIL PROTECTED]
> Subject: RAID and new kernels, FYI
>
>
> The
Hey folks, I'm a software-raid newbie so go easy. :-)
I'm testing a very minimal 2-disk RAID-1 to get a hang of the failure
recovery mechanisms, and I've run across a problem.
/etc/raidtab
raiddev /dev/md0
raid-level 1
persistent-superblock 1
chunk-size 1
On Sat, May 06, 2000 at 03:19:49PM -0400, Edward Schernau wrote:
> The RAID patches will NOT patch cleanly (nor will much else)
> on a Redhat-supplied kernel. Make sure you start with a
that maybe is beacuse the raid patch are already applied
L.
--
Luca Berra -- [EMAIL PROTECTED]
Communica
The RAID patches will NOT patch cleanly (nor will much else)
on a Redhat-supplied kernel. Make sure you start with a
fresh kernel.org tarball.
Ed
Gregory Leblanc wrote:
>
> The 2.2.11 patch will work with kernels up to 2.2.13. There is a patch for
> 2.2.14 that applies cleanly, and can be found at
> http://www.redhat.com/~mingo/ This patch will also apply to the 2.2.15
> kernel, but I believe that it will have 1 reject that you'll have t
First, check out the Software-RAID-HOWTO at http://www.LinuxDoc.org/
> -Original Message-
> From: Andreas ~ [mailto:[EMAIL PROTECTED]]
> Sent: Saturday, May 06, 2000 4:53 AM
> To: [EMAIL PROTECTED]
> Subject: Software-RAID and new Kernel -> Patch?
>
> Sorry if this question has already
Sorry if this question has already been answered in the past - I'm
relative new to this list and to Linux...
I'm using software-RAID Level 0 with kernel 2.2.11 and the correspon-
ding raidpatch (raid0145-19990824-2.2.11) and the newest raid-
tools 0.90 (raidtools-19990824-0.90.tar).
It seems that
Hi all,
I need help setting up an old RAID system with new RAIDtools:
The machine I'm working with previously had Redhat 4.2 installed on it
with a striped RAID. The OS has been upgraded to Redhat 6.1, but I can't
get the new set of raidtools to read the old RAID.
When the two devices are comp
