Volker Wysk wrote:
>
> Hello!
>
> RedHat 6.1's graphical install program has destroyed my RAID0 volume,
> which is really bad for me.
>
> I was going to install a second Linux, on a separate partition, and chose
> "create RAID partition", and to *not* format it. After that, I couldn't
> mount i
Hello!
RedHat 6.1's graphical install program has destroyed my RAID0 volume,
which is really bad for me.
I was going to install a second Linux, on a separate partition, and chose
"create RAID partition", and to *not* format it. After that, I couldn't
mount it any longer. e2fsck and dumpe2fs comp
I tried the 2.3.99-pre8 Kernel, but I cannot load the raid1/5 module.
I can only load the raid0 module.
# modprobe raid1
/lib/modules/2.3.99-pre8/block/raid1.o: unresolved symbol drive_stat_acct
/lib/modules/2.3.99-pre8/block/raid1.o: insmod /lib/modules/2.3.99-pre8/block/raid1.o
failed
/lib/mod
> We had some problems with raid-1 & lilo to allow booting
> from /dev/hda and /dev/hdc.
>
See Boot+Root+Raid+Lilo at the Linux Documentation Project or
ftp.bizsystems.net/pub/raid/Boot+Root+Raid+LILO.html
Hi,
We had some problems with raid-1 & lilo to allow booting
from /dev/hda and /dev/hdc.
We realized executing /sbin/lilo allows to start server
only from hda. When we tries to start from hdc we had
LI
One solution was to change HD hda > hdc and hdc > hda
and make /sbin/lilo.
The other is to
> I wrote about my ide-raid-1 crash (one hd was died).
> I have changed this hd and all works fine now (raid my love :) )
> except lilo (lilo-0.21-15) which does not want to run.
> I have start with a floppy but need help to make it clean.
the problem was:
raid did not finish the reconstruction
