>From the Software-RAID-2.html
" ...
RAID-0 is much like RAID-linear, except that the component partitions
are divided into stripes and then interleaved. Like RAID-linear, the
result is a single larger virtual partition.
RAID-1 is also referred to as "mirroring". Two (or more) partitions, al
I fought with this for a full day before I got it to work. I was
pleasantly surprised to findd that it 'just worked'. The required lines
were already in rc.sysinit, even.
Here are my specifics. (YMMV)
RedHat 5.2, kernel level 2.0.36
raidtools-0.50beta10-2 RPM installed
fdisk all disks, to provid
>
>When I run
>mkraid /dev/md0
>The output I get is
>
>handling MD device /dev/md0
>analyzing super-block
>disk 0: /dev/sda1, 8890352kB, raid superblock at 8890240kB
>disk 1: /dev/sdb1, 8890352kB, raid superblock at 8890240kB
>disk 2: /dev/sdc1, 8890352kB, raid superblock at 8890240kB
>disk 3
When I run
mkraid /dev/md0
The output I get is
handling MD device /dev/md0
analyzing super-block
disk 0: /dev/sda1, 8890352kB, raid superblock at 8890240kB
disk 1: /dev/sdb1, 8890352kB, raid superblock at 8890240kB
disk 2: /dev/sdc1, 8890352kB, raid superblock at 8890240kB
disk 3: /dev/sdd1,
