I've been using the 428 on a Dell 4200. 2x300MHz PII, stock RH
2.2.5-15smp, driver from megatrends site, 2xACEnic GbE, no frills NFS
server configuration, 5x9MB RAID 5, board in a primary PCI slot with no
shared interrupts.
~18 MB/s on larger multi-stream, sequential i/o tests (dd & bonnie
cockt
Hmm... My Dual Celeron box works fine with the MegaRAID 428. I'm using
2.2.13pre6 at the moment. I did update to the UF80 firmware but I was
using the original firmware before without any real problem. My problem
is it won't swallow my narrow devices.
Might you have bad memory on the card?
Brian
On Tue, 14 Sep 1999, Chad Schmutzer wrote:
> The system in question is a Dell PowerEdge 6300 with 4 processors.
> I have the Dell OEM AMI MegaRAID 428 controller configured for RAID 5.
>
> When I boot with any 2.2.x SMP kernel and run a command which utilizes
> the disk (such as untarring a larg
Hello,
I'm sorry if this is a known issue, but I have been having problems
which I cannot find an answer for.
The system in question is a Dell PowerEdge 6300 with 4 processors.
I have the Dell OEM AMI MegaRAID 428 controller configured for RAID 5.
When I boot with any 2.2.x SMP kernel and run a
