Andre, Thanks so much for the reply. In my case I am using a BE6
motherboard made my ABIT. This mother board has all 4 IDE channels build
into it, so there is no PCI card. However when looking at the way the
BIOS acts, I think the motherboard emulates a PCI card with this chipset.
So even thoug
# LILO configuration file
# generated by 'liloconfig'
#
# Start LILO global section
append="mem=255M pci=reverse maxcpus=2"
#
boot = /dev/hda
# compact# faster, but won't work on all systems.
This it the top of my lilo.conf file, so yes.
Andre Hedrick
The Linux IDE guy
On Sun, 31 Oct 1
Andre Hedrick wrote:
>
> In order to get the off board cards to boot you have to enable the option
> first, now comes the FUN!
>
> You are now required to determine the PCI card slot order.
> Since LILO does not like to boot drives beyond the fourth device, in IDE
> land. You must call
In order to get the off board cards to boot you have to enable the option
first, now comes the FUN!
You are now required to determine the PCI card slot order.
Since LILO does not like to boot drives beyond the fourth device, in IDE
land. You must call "pci=reverse" to invert the pci-dev
- Original Message -
From: Robert <[EMAIL PROTECTED]>
To: Andre Hedrick <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Sunday, October 31, 1999 11:52 PM
Subject: Web site on IDE patch status
> Andre, as you may remember from a prior email, I am
Andre, as you may remember from a prior email, I am anxious to get my
HPT366 controller chipset working. At present I am using 2.2.12 with
patches: ide.2.2.12.19991014.patch & raid0145-19990824-2.2.11. The system
fails to boot when a drive is connected to either IDE3 or IDE4. In my
case, it's mor
