Hi,
On Thu, Jan 23, 2014 at 3:04 AM, Hans de Goede wrote:
> From: Oliver Schinagl
>
> This patch adds sunxi sata support to A10 boards that have such a connector.
> Some boards also feature a regulator via a GPIO and support for this is also
> added.
>
> Signed-off-by: Olliver Schinagl
> Signed
On Wed, 2014-01-22 at 20:16 +0100, Hans de Goede wrote:
> I will be at the urlab at around 12:00 (if I make my train connection
> otherwise 13:00),
> it is fine if you decide to show up announced, I plan to stay till 20:00 and
> then go
> out for dinner. I hope to see you there.
I think I should
On 23-01-14 09:36, Ian Campbell wrote:
On Wed, 2014-01-22 at 20:16 +0100, Hans de Goede wrote:
I will be at the urlab at around 12:00 (if I make my train connection otherwise
13:00),
it is fine if you decide to show up announced, I plan to stay till 20:00 and
then go
out for dinner. I hope to
On 22-01-14 20:16, Hans de Goede wrote:
Hi,
On 01/14/2014 11:19 AM, Ian Campbell wrote:
On Mon, 2014-01-13 at 17:13 +0100, Hans de Goede wrote:
Hi All,
I know it is pretty late for this, and that most of you have already
made travel
arrangements, sorry about that.
I have this last moment spo
+ Huang
Hi Boris,
On Wed, Jan 08, 2014 at 03:21:56PM +0100, Boris BREZILLON wrote:
> The Hynix nand flashes store their ECC requirements in byte 4 of its id
> (returned on READ ID command).
>
> Signed-off-by: Boris BREZILLON
I haven't verified yet (perhaps Huang can confirm?), but this may be
Hi masters.
I'd like to ask you about your progress with a sun7i_tvd driver
I tried but haven't got any answer from A20-boards suppliers.
The strange situations...
( I don't found the driver in linux-sunxi-sunxi 3.4, only in
...linux-sunxi-import-lichee-3.3-a20-dev.
What means that in for
Hey vladimir
On 23-01-14 05:06, za...@mail.ru wrote:
Hi masters.
I'd like to ask you about your progress with a sun7i_tvd driver
none, nobody is working on it.
I tried but haven't got any answer from A20-boards suppliers.
They dont' know, nor care about customers; they just sell you their
Hi,
On 01/23/2014 10:41 AM, Olliver Schinagl wrote:
On 22-01-14 20:16, Hans de Goede wrote:
Hi,
On 01/14/2014 11:19 AM, Ian Campbell wrote:
On Mon, 2014-01-13 at 17:13 +0100, Hans de Goede wrote:
Hi All,
I know it is pretty late for this, and that most of you have already
made travel
arrang
Hi Patrick,
Actually i compiled bcmdhd as a driver not as a module.
because if i compiled as a module and try to insert it
i am getting fallowing error.
modprobe: FATAL: Could not load
/lib/modules/3.4.75-1-g9cfbbed/modules.dep: No such file or directory
Do you think this will be proble
On 23-01-14 13:21, Puneet B wrote:
Hi Patrick,
Actually i compiled bcmdhd as a driver not as a module.
because if i compiled as a module and try to insert it
i am getting fallowing error.
modprobe: FATAL: Could not load
/lib/modules/3.4.75-1-g9cfbbed/modules.dep: No such file or directo
Hi,
On 01/23/2014 09:36 AM, Ian Campbell wrote:
On Wed, 2014-01-22 at 20:16 +0100, Hans de Goede wrote:
I will be at the urlab at around 12:00 (if I make my train connection otherwise
13:00),
it is fine if you decide to show up announced, I plan to stay till 20:00 and
then go
out for dinner.
Hi,
On 01/23/2014 09:34 AM, Chen-Yu Tsai wrote:
Hi,
On Thu, Jan 23, 2014 at 3:04 AM, Hans de Goede wrote:
From: Oliver Schinagl
This patch adds sunxi sata support to A10 boards that have such a connector.
Some boards also feature a regulator via a GPIO and support for this is also
added.
S
Dear experts,
I'm trying to get the CSI to work on an Olimex A13 board.
The sun4i_csi driver crashes since it tries to start clocks that are not
available on sun5i. But, there is no sun5i_csi driver in the main development
line.
I found a sun5i_csi in a 'wip' branch. But, that branch doesn't bu
On Sat, Jan 11, 2014 at 7:38 AM, boris brezillon
wrote:
> On 08/01/2014 15:21, Boris BREZILLON wrote:
>>
>> Hello,
>>
>> This series add the sunxi NFC support with up to 8 NAND chip connected.
>> I'm still in the early stages drivers development and some key features
>> are
>> missing, but it's us
As Enrico said earlier in this thread, it is pointless to start any work
without a "working setup", even if using blobs from AW drops and using
their distro.
All we have are 4 pins that we don't even know if more than a resistor and
a connector is required, which TV modes are supported, etc.
W
Em terça-feira, 21 de janeiro de 2014 08h44min19s UTC-3, Tomas Novotny
escreveu:
> Hi All,
>
>
>
> I'm trying to use some SPI devices on A10s OLinuXino. It was flawless for
>
> simple MCU driven by spidev (everything needed is defined in FEX). Now I'm
>
> trying to connect external CAN over
Em quinta-feira, 23 de janeiro de 2014 13h59min19s UTC-3, vinic...@gmail.com
escreveu:
> Em terça-feira, 21 de janeiro de 2014 08h44min19s UTC-3, Tomas Novotny
> escreveu:
>
> > Hi All,
>
> >
>
> >
>
> >
>
> > I'm trying to use some SPI devices on A10s OLinuXino. It was flawless for
>
Why dont you just add the device to the fex file ??
activate your spix_para parameters
and add something like:
|[spi_devices]|
spi_dev_num=1
|[spi_board0]|
|modalias| |= ||"|mcp251x|"|||
|max_speed_hz| |= ||1200|
|bus_num| |= ||1|
|chip_select| |= ||0|
|mode| |= ||3|
|full_duplex| |= ||0|
On Thursday, January 23, 2014 7:31:22 AM UTC-5, Olliver Schinagl wrote:
>
>
>
> On 23-01-14 13:21, Puneet B wrote:
> > Hi Patrick,
> >
> > Actually i compiled bcmdhd as a driver not as a module.
> >
> > because if i compiled as a module and try to insert it
> >
> > i am getting fallowing e
On Thu, 23 Jan 2014 09:03:28 -0800 (PST), vinicius...@gmail.com
wrote:
> Em quinta-feira, 23 de janeiro de 2014 13h59min19s UTC-3, vinic...@gmail.com
> escreveu:
> > Em terça-feira, 21 de janeiro de 2014 08h44min19s UTC-3, Tomas Novotny
> > escreveu:
> >
> > > Hi All,
> >
> > >
> >
> > >
On Thu, 23 Jan 2014 19:11:32 +0100, Gustavo Zamboni
wrote:
Hi Gustavo,
> Why dont you just add the device to the fex file ??
>
> activate your spix_para parameters
>
> and add something like:
>
>
> |[spi_devices]|
> spi_dev_num=1
>
> |[spi_board0]|
> |modalias| |= ||"|mcp251x|"|||
> |max_spe
I'm sorry, i didnt see you needed that.
you can use on of the script parse functions to get the oscilator
frequency value from the fex.
Of course you will have to change the spi src as vinicius said.
Gustavo
Le 23/01/2014 21:24, Tomas Novotny a écrit :
On Thu, 23 Jan 2014 19:11:32 +0100, Gust
Hi,
I've been working on updating sunxi-devel to include more
recent versions if your gmac patches, as well as adding support
for the wifi + bluetooth found on the cubietruck.
Here is my current work on this:
https://github.com/jwrdegoede/linux-sunxi/commits/sunxi-devel
It is close to working,
Hi,
On 01/23/2014 11:39 PM, Hans de Goede wrote:
Hi,
I've been working on updating sunxi-devel to include more
recent versions if your gmac patches, as well as adding support
for the wifi + bluetooth found on the cubietruck.
Here is my current work on this:
https://github.com/jwrdegoede/linux
Hi,
On Fri, Jan 24, 2014 at 6:56 AM, Hans de Goede wrote:
> Hi,
>
>
> On 01/23/2014 11:39 PM, Hans de Goede wrote:
>>
>> Hi,
>>
>> I've been working on updating sunxi-devel to include more
>> recent versions if your gmac patches, as well as adding support
>> for the wifi + bluetooth found on the
25 matches
Mail list logo
