Hi,
On 10/07/2015 05:01 PM, Stefan Monnier wrote:
@Maxime: How should we handle this? In its current form, the patch applies
only to the BananaPi dts by overriding the inherited opp from the SoC dtsi.
In an earlier discussion, it was said that this can be done, even though it
might not be the
Hi Timo,
On Mon, Oct 05, 2015 at 07:39:57PM +0200, Timo Sigurdsson wrote:
> Hi Kevin,
>
> Kevin Hilman schrieb am 24.09.2015 19:57:
> > kernelci.org started finding boot faiulres[1] on bananapi linux-next
> > around next-20150918, but it was only failing in some labs and not
> > others. I
"Timo Sigurdsson" writes:
> Kevin Hilman schrieb am 24.09.2015 19:57:
>> kernelci.org started finding boot faiulres[1] on bananapi linux-next
>> around next-20150918, but it was only failing in some labs and not
>> others. I finally bisected it down to this patch,
Hi Timo,
On Wed, Oct 07, 2015 at 05:49:18PM +0200, Timo Sigurdsson wrote:
> Hi Kevin,
> Hi Maxime,
>
> Kevin Hilman schrieb am 07.10.2015 16:36:
>
> > "Timo Sigurdsson" writes:
> >> I still think that the lower voltages may be the cause of your problem
> >> with
> @Maxime: How should we handle this? In its current form, the patch applies
> only to the BananaPi dts by overriding the inherited opp from the SoC dtsi.
> In an earlier discussion, it was said that this can be done, even though it
> might not be the most elegant approach. But then again, I think
Hi Kevin,
Hi Maxime,
Kevin Hilman schrieb am 07.10.2015 16:36:
> "Timo Sigurdsson" writes:
>> I still think that the lower voltages may be the cause of your problem
>> with that specific board, so could you please test the attached patch on
>> top of my patch that
Hi Maxime,
Maxime Ripard schrieb am 07.10.2015 19:49:
> Hi Timo,
>
> On Wed, Oct 07, 2015 at 05:49:18PM +0200, Timo Sigurdsson wrote:
>> Hi Kevin,
>> Hi Maxime,
>>
>> Kevin Hilman schrieb am 07.10.2015 16:36:
>>
>> > "Timo Sigurdsson" writes:
>> >> I still think
Hi Kevin,
Kevin Hilman schrieb am 24.09.2015 19:57:
> kernelci.org started finding boot faiulres[1] on bananapi linux-next
> around next-20150918, but it was only failing in some labs and not
> others. I finally bisected it down to this patch, which landed in
> linux-next in the form of
On Sunday, 27 September 2015 09:21:00 UTC+1, Maxime Ripard wrote:
>
> I've dropped the patch waiting for you to come back from your holidays
> when we will have more time to figure out what's wrong.
>
FYI, I'm running this patch on a BananaPi and have also modified the BPro
dts so the reg is
On Fri, Sep 25, 2015 at 05:05:58PM +0200, Timo Sigurdsson wrote:
> Hi Kevin,
>
> Kevin Hilman schrieb am 25. Sept 2015 01:57:
>
> > On Tue, Aug 18, 2015 at 8:36 AM, Maxime Ripard
> > wrote:
> >> On Sun, Aug 02, 2015 at 06:18:25PM +0200, Timo Sigurdsson wrote:
>
Hi Kevin,
Kevin Hilman schrieb am 25. Sept 2015 01:57:
> On Tue, Aug 18, 2015 at 8:36 AM, Maxime Ripard
> wrote:
>> On Sun, Aug 02, 2015 at 06:18:25PM +0200, Timo Sigurdsson wrote:
>>> sun7i-a20-bananapi.dts doesn't contain regulator nodes for the AXP209
>>>
On Tue, Aug 18, 2015 at 8:36 AM, Maxime Ripard
wrote:
> On Sun, Aug 02, 2015 at 06:18:25PM +0200, Timo Sigurdsson wrote:
>> sun7i-a20-bananapi.dts doesn't contain regulator nodes for the AXP209 PMU
>> driver, so add them to allow for voltage-scaling with
On Tue, Aug 04, 2015 at 11:02:24AM +0200, Timo Sigurdsson wrote:
Hi Maxime,
Maxime Ripard schrieb am 03.08.2015 11:47:
What regulator provides the 3.3V regulator used in the rest of this DT
then (MMC, GMAC) ?
For GMAC, there is a reg_gmac_3v3 defined in sun7i-a20-bananapi.dts [1].
MMC
On Sun, Aug 02, 2015 at 06:18:25PM +0200, Timo Sigurdsson wrote:
sun7i-a20-bananapi.dts doesn't contain regulator nodes for the AXP209 PMU
driver, so add them to allow for voltage-scaling with cpufreq-dt.
Signed-off-by: Timo Sigurdsson public_tim...@silentcreek.de
Queued, thanks!
Maxime
--
Hi Maxime,
Maxime Ripard schrieb am 03.08.2015 11:47:
What regulator provides the 3.3V regulator used in the rest of this DT
then (MMC, GMAC) ?
For GMAC, there is a reg_gmac_3v3 defined in sun7i-a20-bananapi.dts [1].
MMC uses reg_vcc3v3 included from sunxi-common-regulators.dtsi. Am I
missing
On Sun, Aug 02, 2015 at 06:18:25PM +0200, Timo Sigurdsson wrote:
sun7i-a20-bananapi.dts doesn't contain regulator nodes for the AXP209 PMU
driver, so add them to allow for voltage-scaling with cpufreq-dt.
Signed-off-by: Timo Sigurdsson public_tim...@silentcreek.de
---
Changes since v1
Hi,
On 03-08-15 11:47, Maxime Ripard wrote:
On Sun, Aug 02, 2015 at 06:18:25PM +0200, Timo Sigurdsson wrote:
sun7i-a20-bananapi.dts doesn't contain regulator nodes for the AXP209 PMU
driver, so add them to allow for voltage-scaling with cpufreq-dt.
Signed-off-by: Timo Sigurdsson
17 matches
Mail list logo