On Tue, Nov 04, 2014 at 10:08:27PM +0100, Bruno Prémont wrote:
> On Tue, 04 November 2014 Maxime Ripard
> wrote:
> > On Mon, Nov 03, 2014 at 09:02:44PM +0100, Bruno Prémont wrote:
> > > Doing something like this?:
> > >
> > > --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
> > > +++ b/arch/arm
*Hello Bruno Thank you for your attention sought some more docs just
applying a patch and here is the result.*
*add*
*https://dev.openwrt.org/browser/trunk/target/linux/sunxi/patches-3.14/210-mfd-add-axp20x-pmic-driver.patch?rev=42463*
*https://dev.openwrt.org/browser/trunk/target/linux/sunxi
Hi Ezaul,
On Tue, 04 November 2014 Ezaul Zillmer wrote:
> Cubieboard2 + Kernel 3.18-rc3
>
> [ 15.955655] axp20x-regulator axp20x-regulator: regulators node not found
> [ 15.962580] LDO1: 1300 mV
> [ 15.965732] LDO2: at 3000 mV
> [ 15.969120] LDO3: at 2275 mV
> [ 15.972314] LDO4: at 28
Hi Maxime,
On Tue, 04 November 2014 Maxime Ripard wrote:
> On Mon, Nov 03, 2014 at 09:02:44PM +0100, Bruno Prémont wrote:
> > Doing something like this?:
> >
> > --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
> > +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
> > @@ -126,9 +126,11 @@
> >
Hi Bruno,
On Mon, Nov 03, 2014 at 09:02:44PM +0100, Bruno Prémont wrote:
> Doing something like this?:
>
> --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
> +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
> @@ -126,9 +126,11 @@
> interrupt-controller;
>
Hi Bruno
Cubieboard2 + Kernel 3.18-rc3
[ 15.955655] axp20x-regulator axp20x-regulator: regulators node not found
[ 15.962580] LDO1: 1300 mV
[ 15.965732] LDO2: at 3000 mV
[ 15.969120] LDO3: at 2275 mV
[ 15.972314] LDO4: at 2800 mV
[ 15.975700] LDO5: at 2800 mV
[ 15.979075] DCDC2: at
Hi Maxime,
On Tue, 21 October 2014 Maxime Ripard wrote:
> On Tue, Oct 21, 2014 at 06:09:16PM +0200, Bruno Prémont wrote:
> > On Tue, 21 October 2014 Lee Jones wrote:
> > > On Mon, 20 Oct 2014, Bruno Prémont wrote:
> > > > ---
> > > > Note: the OCV values seem to have some defaults build into the
On Tue, 21 October 2014 Lee Jones wrote:
> On Mon, 20 Oct 2014, Bruno Prémont wrote:
> > ---
> > Note: the OCV values seem to have some defaults build into the
> > PMIC though may need adjustment if the used battery has a different
> > open circuit voltage curve.
> > As far as understood (these va
On Mon, Oct 20, 2014 at 10:33:14PM +0200, Bruno Prémont wrote:
>
> ---
You're missing a commit log, and your signed-off-by.
You should go through Documentation/SubmittingPatches, and make sure
to run checkpatch.pl, and fix the warning and errors.
> Note: the OCV values seem to have some default
Hi Bruno,
Thanks a lot for working on this!
On Tue, Oct 21, 2014 at 06:09:16PM +0200, Bruno Prémont wrote:
> On Tue, 21 October 2014 Lee Jones wrote:
> > On Mon, 20 Oct 2014, Bruno Prémont wrote:
> > > ---
> > > Note: the OCV values seem to have some defaults build into the
> > > PMIC though may
On Mon, 20 Oct 2014, Bruno Prémont wrote:
>
> ---
> Note: the OCV values seem to have some defaults build into the
> PMIC though may need adjustment if the used battery has a different
> open circuit voltage curve.
> As far as understood (these values are set in vendor driver but not
> mentioned
11 matches
Mail list logo