Fantastic, thanks Tony.
I'll try it out this weekend.
-Randy
On Fri, Dec 20, 2013 at 10:17 AM, Tony Cheneau wrote:
> Hi Randy,
>
> It should work just fine with a recent net-next kernel. I tried it this
> week and it was working without modifications.
>
> If you are using my "code", you might
Hi Randy,
It should work just fine with a recent net-next kernel. I tried it this
week and it was working without modifications.
If you are using my "code", you might also be interesting in using some
recent linux-zigbee tools so that you can select an higher baudrate in
the "izattach" tool. Y
Thanks Tony.
I have a couple of econotags so I'll give your driver and firmware a shot.
Ultimately I want to get this running on our custom freescale board with
mrf24j40 and have been using the beaglebone as a stepping stone, but
getting my econotags working would also be a good step.
I am runni
Hi Randy,
At work, I use some RedBee Econotags with a slightly modified version
of the serial driver [1] and of the firmware [2]. It works reasonably
well (I'm experiencing 5% packet loss maybe, but it might be due to some
WiFi interferences).
Regards,
Tony
[1]: https://gist.github.com/tchene
