On Wed, 2004-05-05 at 16:12, Eric W. Biederman wrote:
>
> No. This must be per chip.
>
> Because you cannot necessarily see these devices before you enable/disable
> them. And only one device on the 8111 actually does the enable/disable.
>
BTW, as shown in the log, the amd8111_enable is calle
On Wed, 2004-05-05 at 16:12, Eric W. Biederman wrote:
> Li-Ta Lo <[EMAIL PROTECTED]> writes:
>
> > On Wed, 2004-05-05 at 10:51, YhLu wrote:
> > > If I changed config.lb
> > > PCI 1:0.2 on --> PCI 1:0.2 off
> > > The PCI 1:0.0 and PCI 1:0.1 will be disabled together.
> > >
> > > According to AMD
YhLu <[EMAIL PROTECTED]> writes:
> According to AMD, USB 2 in amd8111 will never work.
As I have read the documentation it says USB 2.0 devices will never
work.
However what you are disabling is not support for USB 2.0 devices but
a newer USB controller. Granted it is usually used for USB 2.0
Li-Ta Lo <[EMAIL PROTECTED]> writes:
> On Wed, 2004-05-05 at 10:51, YhLu wrote:
> > If I changed config.lb
> > PCI 1:0.2 on --> PCI 1:0.2 off
> > The PCI 1:0.0 and PCI 1:0.1 will be disabled together.
> >
> > According to AMD 8111 data sheet, LPC 0x48, only can be disabled the device
> > in seco
tefan Reinauer; [EMAIL PROTECTED]
主题: Re: 答复: 答复: 答复: Disable USB2 in AMD8111 and remove ide hardcode
io addr
On Wed, 5 May 2004, YhLu wrote:
> If I changed config.lb
> PCI 1:0.2 on --> PCI 1:0.2 off
> The PCI 1:0.0 and PCI 1:0.1 will be disabled together.
>
> According to AMD 81
einauer; LinuxBIOS
> äé: Re: çå: çå: çå: Disable USB2 in AMD8111 and remove ide hardcode
> io addr
>
> On Wed, 2004-05-05 at 10:51, YhLu wrote:
> > If I changed config.lb
> > PCI 1:0.2 on --> PCI 1:0.2 off
> > The PCI 1:0.0 and PCI 1:0.1 will be disabled together.
&
So everyone need to find lpc_dev at first???
YH
-邮件原件-
发件人: Li-Ta Lo [mailto:[EMAIL PROTECTED]
发送时间: 2004年5月5日 10:28
收件人: YhLu
抄送: ron minnich; Stefan Reinauer; LinuxBIOS
主题: Re: 答复: 答复: 答复: Disable USB2 in AMD8111 and remove ide hardcode
io addr
On Wed, 2004-05-05 at 10:51, YhLu wrote
; LinuxBIOS
主题: Re: 答复: 答复: 答复: Disable USB2 in AMD8111 and remove ide hardcode
io addr
On Wed, 2004-05-05 at 10:51, YhLu wrote:
> If I changed config.lb
> PCI 1:0.2 on --> PCI 1:0.2 off
> The PCI 1:0.0 and PCI 1:0.1 will be disabled together.
>
> According to AMD 8111 data sh
On Wed, 2004-05-05 at 10:51, YhLu wrote:
> If I changed config.lb
> PCI 1:0.2 on --> PCI 1:0.2 off
> The PCI 1:0.0 and PCI 1:0.1 will be disabled together.
>
> According to AMD 8111 data sheet, LPC 0x48, only can be disabled the device
> in second bus by device num, and the three USB share one de
On Wed, 5 May 2004, YhLu wrote:
> If I changed config.lb
> PCI 1:0.2 on --> PCI 1:0.2 off
> The PCI 1:0.0 and PCI 1:0.1 will be disabled together.
>
> According to AMD 8111 data sheet, LPC 0x48, only can be disabled the device
> in second bus by device num, and the three USB share one device num
be there.
YH
-邮件原件-
发件人: ron minnich [mailto:[EMAIL PROTECTED]
发送时间: 2004年5月5日 9:28
收件人: YhLu
抄送: Stefan Reinauer; [EMAIL PROTECTED]
主题: Re: 答复: 答复: Disable USB2 in AMD8111 and remove ide hardcode io
addr
On Wed, 5 May 2004, YhLu wrote:
> I change my mind, disable that in Config
On Wed, 5 May 2004, YhLu wrote:
> I change my mind, disable that in Config.lb is better and less code.
good!
ron
___
Linuxbios mailing list
[EMAIL PROTECTED]
http://www.clustermatic.org/mailman/listinfo/linuxbios
I change my mind, disable that in Config.lb is better and less code.
YH
-邮件原件-
发件人: ron minnich [mailto:[EMAIL PROTECTED]
发送时间: 2004年5月5日 9:25
收件人: YhLu
抄送: Stefan Reinauer; [EMAIL PROTECTED]
主题: Re: 答复: Disable USB2 in AMD8111 and remove ide hardcode io addr
On Wed, 5 May 2004, YhLu
On Wed, 5 May 2004, YhLu wrote:
> According to AMD, USB 2 in amd8111 will never work.
well, that's certainly interesting.
If AMD is certain about that, and no one else objects, I remove any
concerns I have about this code. But please put in a more informative
comment such as "will never work"
According to AMD, USB 2 in amd8111 will never work.
YH
-邮件原件-
发件人: ron minnich [mailto:[EMAIL PROTECTED]
发送时间: 2004年5月5日 7:07
收件人: YhLu
抄送: Stefan Reinauer; [EMAIL PROTECTED]
主题: Re: Disable USB2 in AMD8111 and remove ide hardcode io addr
On Wed, 5 May 2004, ron minnich wrote:
>
On Wed, 5 May 2004, Li-Ta Lo wrote:
> On Tue, 2004-05-04 at 23:26, YhLu wrote:
> > Ron,
> >
> > I'm going to add several lines in amd8111_enable of amd8111.c to disable
> > USB2 in amd8111.
> >
> > /* disable usb2 in amd 8111 because it does not work awlays*/
> > byte = pci_read
On Tue, 2004-05-04 at 23:26, YhLu wrote:
> Ron,
>
> I'm going to add several lines in amd8111_enable of amd8111.c to disable
> USB2 in amd8111.
>
> /* disable usb2 in amd 8111 because it does not work awlays*/
> byte = pci_read_config8(lpc_dev, 0x47);
> byte |= (1<<7);
>
ron minnich <[EMAIL PROTECTED]> writes:
> On Tue, 4 May 2004, YhLu wrote:
>
> > I'm going to add several lines in amd8111_enable of amd8111.c to disable
> > USB2 in amd8111.
> >
> > /* disable usb2 in amd 8111 because it does not work awlays*/
> > byte = pci_read_config8(lpc_dev
On Wed, 5 May 2004, ron minnich wrote:
> On Tue, 4 May 2004, YhLu wrote:
>
> > I'm going to add several lines in amd8111_enable of amd8111.c to disable
> > USB2 in amd8111.
> >
> > /* disable usb2 in amd 8111 because it does not work awlays*/
> > byte = pci_read_config8(lpc_dev,
On Tue, 4 May 2004, YhLu wrote:
> I'm going to add several lines in amd8111_enable of amd8111.c to disable
> USB2 in amd8111.
>
> /* disable usb2 in amd 8111 because it does not work awlays*/
> byte = pci_read_config8(lpc_dev, 0x47);
> byte |= (1<<7);
> pci_write_
Ron,
I'm going to add several lines in amd8111_enable of amd8111.c to disable
USB2 in amd8111.
/* disable usb2 in amd 8111 because it does not work awlays*/
byte = pci_read_config8(lpc_dev, 0x47);
byte |= (1<<7);
pci_write_config8(lpc_dev, 0x47, byte);
Also will
* YhLu <[EMAIL PROTECTED]> [040505 07:26]:
> Ron,
>
> I'm going to add several lines in amd8111_enable of amd8111.c to disable
> USB2 in amd8111.
[..]
> Also will remove several lines in amd8111_ide.c
>
> /* The AMD768 has a bug where the BM DMA address must be
> * 256 byte
22 matches
Mail list logo
