, Peter Stuge [EMAIL PROTECTED] wrote:
On Wed, Aug 01, 2007 at 08:50:30AM -0300, Otávio Alcântara wrote:
I've used memtest as a payload and the test was sucessfully.
How long did you leave it running? 24 hours is good to make sure.
Any other idea for the RAMDISK blow up?
It's usually
Thanks for the help. But I have another doubt, I'm not getting video working
even after the linux kernel boots. What do I do to change the console to
video? I've configured Filo to use video console, but the stream goes only
to serial interface.
Regards,
Otávio Alcântara
On 6/20/07, Marc Jones
Hello,
Sorry, it was my bad. I wrong typed the address of option root (
root=/dev/hda insted of root=/dev/hda1 ) of FILO's 'Config' file.
Thanks for the help,
Otávio
On 6/4/07, Peter Stuge [EMAIL PROTECTED] wrote:
On Fri, Jun 01, 2007 at 11:44:13AM -0300, Otávio Alcântara wrote
/07, Peter Stuge [EMAIL PROTECTED] wrote:
Hello Otávio,
On Wed, Jun 06, 2007 at 01:55:19PM -0300, Otávio Alcântara wrote:
Sorry, it was my bad. I wrong typed the address of option
root (root=/dev/hda insted of root=/dev/hda1 ) of FILO's 'Config'
file.
Thanks for the help,
So
formatted.
Is there any other option that need to be setted? Is possible to
choose more than one file system, I mean, FAT and EXT2?
Best Regards,
--
Otávio Alcântara
I'll never cross to the Dark Side.
--
linuxbios mailing list
linuxbios@linuxbios.org
http://www.linuxbios.org/mailman/listinfo
:
do_vsmbios
I'm not including the vsa in the linuxbios.rom, is that the problem?
And how can I concatenate the two files correctly?
Regards,
Otávio Alcântara
On 5/24/07, Otávio Alcântara [EMAIL PROTECTED] wrote:
Thanks Marc,
I will try buildrom.
Regards,
Otavio
On 5/23/07, Marc
] wrote:
Ühel kenal päeval (kolmapäev 30 mai 2007 3:31 pm) kirjutas Otávio
Alcântara:
Hello,
I used the buildrom tool
Did you have trouble with buildrom-devel? I mean building the packages
etc.
Currently I can't get it to work.
sed tool can be sensitive to locale (in bad way). I have seen
Thanks Marc,
I will try buildrom.
Regards,
Otavio
On 5/23/07, Marc Jones [EMAIL PROTECTED] wrote:
Otávio Alcântara wrote:
I used a dissambly and there is no jump in the reset vector. I've tried
other board (amd rumba, using the same tools JTAG and memory
programmer) and it starts
is simple:
hexdump romimage
and see if I see a jump at end.
ron
--
Otávio Alcântara
I'll never cross to the Dark Side.
--
linuxbios mailing list
linuxbios@linuxbios.org
http://www.linuxbios.org/mailman/listinfo/linuxbios
with no problems.
Do you know what could be the problem?
Otávio
On 5/17/07, Uwe Hermann [EMAIL PROTECTED] wrote:
On Thu, May 17, 2007 at 09:32:45AM -0300, Otávio Alcântara wrote:
I'm porting linuxbios to a plataform similar to msm800sel board
(same
processor, companion e superio) and I'm in doubt
to flash
the rom and it's okay too because a program the original bios with it.
On 5/21/07, Uwe Hermann [EMAIL PROTECTED] wrote:
[Please always reply to the mailing list, not individual developers]
On Mon, May 21, 2007 at 12:00:37PM -0300, Otávio Alcântara wrote:
I'm using a JTAG debugger and I can't
the file to a
binary format?
Regards,
--
Otávio Alcântara
--
linuxbios mailing list
linuxbios@linuxbios.org
http://www.linuxbios.org/mailman/listinfo/linuxbios
12 matches
Mail list logo