On Nov 22, 2007 9:11 PM, ron minnich [EMAIL PROTECTED] wrote:
Try to enable all the debug prints you can in-kernel that relate to
APIC (NOT ACPI-- APIC). see arch/i386/pci/acpi.c I believe.
Sigh. My fingers typed for me. I meant ioapic.c ...
ron
--
linuxbios mailing list
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
SMP mptable: bad signature [TEST]!
BIOS bug, MP table errors detected!...
... disabling SMP support. (tell your hw vendor)
And there is your problem. You don't need to worry about IRQ tables
ever again. We have to fix
On Nov 22, 2007 9:19 PM, Jerome Ibanes [EMAIL PROTECTED] wrote:
Ron,
Unfortunately, I have changed sig to PCMP, and I still get a very
similar output. I might be able to provide a bios output, but at this time
I had to remove the opteron as it was making the system unstable (kernel
oops
Ron,
Unfortunately, I have changed sig to PCMP, and I still get a very
similar output. I might be able to provide a bios output, but at this time
I had to remove the opteron as it was making the system unstable (kernel
oops after a little while, could be related to overheating perhaps).
Jerome
Folks,
Included are the superiotool lspci outputs for the DFI LANPARTY nF4
SLI-DR, please notice that this board has the same north+south bridge as
the Asus A8N-E.
[snip]
After moving the bits from asus/a8n_e (thanks Uwe!) and creating a new
dfi/nf4_sli_dr branch and changing the VendorID
On Nov 21, 2007 12:37 AM, Jerome Ibanes [EMAIL PROTECTED] wrote:
In set_Trwt():
if ((clocks DTH_TRWT_MIN) || (clocks DTH_TRWT_MAX)) {
die(Unknown Trwt);
}
It might not kill us, or destroy linuxbios as a project, if we did
something like this:
print(Trwt
On Wed, Nov 21, 2007 at 09:05:01AM -0800, ron minnich wrote:
On Nov 21, 2007 12:37 AM, Jerome Ibanes [EMAIL PROTECTED] wrote:
In set_Trwt():
if ((clocks DTH_TRWT_MIN) || (clocks DTH_TRWT_MAX)) {
die(Unknown Trwt);
}
It might not kill us, or
On Wed, Nov 21, 2007 at 11:22:50AM -0800, Jerome Ibanes wrote:
Ron List,
print(Trwt %x is out of range: min %x max %x\n etc. etc. etc.
[snip]
Are you suggesting that I try to boot with less or different memory? I've
Yes. Only one DIMM in the slot which the manual says it should be.
Uwe, Ron List,
Jerome, can you try two things on the board:
- Only use _one_ DIMM (if you used more for the first test), AFAIK
there are some issues with multiple DIMMs, but I'm not sure yet.
That's what I had in mind, I will proceed accordingly and report my
findings to the list.
Included are the superiotool lspci outputs for the DFI LANPARTY
nF4 SLI-DR, please notice that this board has the same
north+south bridge as the Asus A8N-E.
It also has a sockered bios.
superiotool -dV
superiotool r2975
Probing for ALi Super I/O at 0x3f0...
Failed. Returned data: id=0x,
10 matches
Mail list logo