I have spent the past few months slowly trying to get a PCI design
with Linux 2.6 on the Virtex 4. I have been able to overcome some of
the hurdles; however, I am still unable to boot up a working system.
I am using PPC.I have implemented Xilinx's board support package including
xparameter head f
I'm not using DRE and CSUM yet. I have seen some weirdness similar to
that but hard to reproduce reliably to chase it.
I tend to see it with heavy traffic also, so maybe it's not related to
DRE & CSUM. I am running DMA.
-- John
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL
On Sun, Aug 26, 2007 at 7:00 PM, <[EMAIL PROTECTED]> wrote:
> I am having a problem with my network. I am using a V4FX12 running linux
> 2.6.21 with the TEMAC. I am running the PPC at 300 MHz and the TEMAC is
> configured for DMA and DRE on the Xmit and the Recv. I have tried varying
> the F
I am using a set top box board : MB442 based on STi7109 chip. I use STAPI
(drivers provided by ST) with STlinux kernell. I have some problems with a
module (named mme_host) which must be inserted with arguments (insmod
mme_host.ko transport0=). This operation causes the
following error :
insmod: e
I am working ST set top box board and I need help to resolve some problems.
if you 're working on set top box or you have experience with them these are
more detailed informations:
I am using a set top box board : STB442 based on STi7109 chip. I use STAPI
(drivers provided by ST) with STlinux ker
>
> On Mar 25, 2008, at 8:03 AM, Marco Stornelli wrote:
>> Kumar Gala ha scritto:
>>> On Mar 25, 2008, at 3:02 AM, Marco Stornelli wrote:
Hi,
do you remember my problem with the pci-express? I have an
mpc8641d_hpcn (rev. 2.0) board connected via pci-express with the
Xilinx
