Hello,
I use U-Boot 1.2.0 on MPC5200B. Console over serial works fine. I have a
Grafic controller at LPB Bus and U-Boot shows his console output at VGa too.
But I would need a keyboard. I compiled U-Boot with USB and if i type "usb
reset" the ohci controller scans the USB devices and finds a keybo
Misbah khan wrote:
Hi all,
I am using io_p2v() function in my driver to get the virtual address mapping
timer control registers
i am passing address as 0x48304024 as base and after getting the virtual
address of it i am reading and writing to it but my any attempt to read the
location or write
Guys,
I know that DENX doesn't list ELDK 4.1 with FC9 as officially supported, but
has anyone tried to install it with FC9?
Attempts last night resulted in the install script freezing during install,
and no apparent error messages.
1) Has anyone tried this? Success?
2) Does anyone have suggestio
Hi,
I have an embedded PowerPC (MPC8347) board that works fine with uboot and Linux
2.6.15.
I am trying to upgrade the kernel so that it runs on the latest release - Linux
2.6.27.
So far, I have gotten the kernel to compile on my platform, but of course it
does not boot.
Things have changed d
I'm not claiming to be a Linux driver expert as I'm still learning.
Some of the comments are nits.
Thanks for the effort you're putting in on this.
> Linux Device Driver for Xilinx LL TEMAC 10/100/1000 Ethernet NIC
>
> Original Author Yoshio Kashiwagi
> Updated and Maintained by David Lynch
>
>
Hi Philipp,
I did U-BOOT driver for emaclite. You can set both ping pong mode - all
combination are supported. I tested this driver with Microblaze and works well.
I use this driver almost every day and I have no problem with it. If you have
problem with this driver please send your email to u-boo