:52
via eth0
and here it stop
If I compare with the log for the 3c509 nic (look below) the ws would not
send any DHCPREQUEST
to the server
are there any other parameter that I have forgotten to set in the nic?
Ola Ketil Siqveland
the dhcpd.conf for the nic's are
host ws002 {
#
Yes I have enabled tftp, the server and workstation works fine with
an older 3c509 card but I have many 3com 3c590 PCI network card that
I hope to use in some ws.
Ola Ketil Siqveland
"G. David Sword" wrote:
> On Wed, 2002-02-13 at 06:27, Ola Ketil Siqveland wrote:
> > Hi
&g
: DHCPOFFER on 192.168.0.53 to
00:a0:24:96:84:52 via eth0
The dhcp serve got a question about IP and try do send back the
192.168.0.53
to the workstation, but the workstation has stopped
Does anyone have any solution on this problem?
Ola Ketil Siqveland
Hi When I try to boot up with use of a floppy it
stop after searching for a dhcpd server
.
And in the /var/log /messages it says
dhcpd from 00:0a:12:32:43 via eth0:network WORKSTATION no free leases
What does that means
Here are my dhcpd.conf file
ddns-update-style ad-hoc;
defa
If I want to use KDE with KDM where shall I put these command below can I
use the same as for gdm
Ola Keitil Siqveland
Nancy Solano wrote:
>
> 2) Fix gdm. Use this scripting in /etc/X11/gdm/PreSession/Default
> instead of what is currently in the docs:
>
> # Check for remote floppy on
rom in the netcard.
Ola Ketil Siqveland
Vara Jambak wrote:
> All,
>
> I have installed ltsp with Mandrake 7.2.
> I have also installed etherboot-5.0-4 to get the image for my 3c509 which is
> 3c509.lzrom. The problem is I only have a DOS-based eprom burner (XPRO)
> which requ
Hi
When I start my terminal I got after some screen blinking a message.
Fatal server error
no screens found
I have a S3 Trio64V+ video card and it seems that this card is not
supported in the XFree86 version 4.1. How can I use this card?
Ola Ketil Siqveland