I have downloaded my Etherboot ROM images from www.rom-o-matic.net in binary format. and use a dos based eprom burner and eprom type 27128 and 29c256. The eprom have I taken from old pc bios or from some old graphic cards. All of them work fine with 3com 3c509, remember you have to enable boot rom in the netcard.
Ola Ketil Siqveland Vara Jambak wrote: > All, > > I have installed ltsp with Mandrake 7.2. > I have also installed etherboot-5.0-4 to get the image for my 3c509 which is > 3c509.lzrom. The problem is I only have a DOS-based eprom burner (XPRO) > which require .bin-extension file. > > Should I, buy or build an eprom burner, the one provided by EEP? > or, is there a conversion tool or program to convert the image into a > .bin-extension format? > > I really need your help. > > regards, > > VJ > > ______________________________________________________________________________ > Send a friend your Buddy Card and stay in contact always with Excite Messenger > http://messenger.excite.com > > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
