Hello,
Here is what I have an issue enabling XDMCP. I am trying
to configure this service using ltspcfg on ltsp 4.1.
ltspcfg v0.8 The Linux Terminal Server
Project (http://www.LTSP.org)
Xdmcp is the protocol used by a display manager to present
a login dia
Hi All,
Motherboard with RTL8139 network card with PXE option enabled
+ Boot ROM enabled gives an error "PXE: NBP is too big to fit into
memory" while trying to load kernel from an LTSP Server. It could able
to contact DHCP server where LTSP is running. Any suggestions of what
this message
Tom,
Are you trying to configure dhcp on IPCOP server or just DHCP
on a normal one?
On Fri, 19 Nov 2004 15:03:42 -0500, Tom Allison <[EMAIL PROTECTED]> wrote:
> I found two locations for my DHCP config files.
>
> /etc/dhcpd.conf
> /var/ipcop/dhcpd/dhcpd.conf
>
> Which is it?
>
> I need
Hi,
I have been having some issues configuring local cdrom access
using LTSP - 3.0. I got it working perfect using LTSP - 4.1 version
though. As most the servers which I am working now has LTSP - 3.0
configured on it and I would have to have some down time for
upgrading it to LTSP - 4.1 to ha
I am trying to boot a client having "INT18 network device" as the boot
option in the BIOS. I can able to boot this client having either CDROM
or hard disk drive in the booting options. Right after I chose, INT18
network device, I see this message:
DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS EN
Hello,
option option-128 seem to require a special value which etherboot
requires. Based on http://www.ltsp.org/instructions-3.0.html,
option-128 is not refering to network card's MAC address. Then what it
is refering to? How can I able to find a special value for the network
card I got.
Does anyone know of how to enable PXE for BroadCom Ethernet Controller
4401. My ASUS motherboard has an on-board broadcom network card. Did
anyone faced the same problem with this card? Anyone else figured out
how to make BroadCom Corp network card ( 4401 ) work with LTSP by
enabling PXE option? I
Hello All,
Can anyone suggest me a good barebone PC so that I can
use it as an LTSP client. Currently, I got ASUS pundit Barebone PC but
it doesnt have PXE option in the motherboard BIOS. BroadCom ethernet
on-board ASUS doesnt have etherboot drivers and I couldnt enable PXE
support fo
Hello Daniel,
I got the same PXE issue but with BroadCom 4401. I
didnt find any etherboot drivers for BCM4401. I came to know that
BCM4401 has PXE support but I wanted to know of how I could enable it.
I am trying to boot one of my client diskless machines which has
BroadCom Corpo
Local cdrom drive access on diskless clients
Hi everyone,
This is my first mail to LTSP mailing
lists. I am working on RH-9 Linux machines. LTSP is
Too many errors encountered; the rest of the message
is ignored:
Command? working fine. I could access local floppy
drive on
Too many errors
10 matches
Mail list logo