Hi,
Hoping that some LaTeX experts here may be able to help me with a book
project which I am doing in LaTeX (instead of LyX).
Q-1) How do I leave a page Intetionally Blank, after the title page,
and before the abstract page, if I am using...
\documentclass[11pt,a4paper,titlepage]{article}
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi Barnibrata,
Banibrata Dutta schrieb:
| Hoping that some LaTeX experts here may be able to help me with a book
| project which I am doing in LaTeX (instead of LyX).
Personally, if I was you I would ask those questions in a TeX-Newsgroup
like
On 12/11/05, Nusret BALCI [EMAIL PROTECTED] wrote:
Thank you Paul. By the way, your suggestion uncovered
just another minor issue: I use sciword binding file.
It supposedly includes the math.bind file which
contains the binding you mentioned (but without
AltGr). However it didn't work. I
Paul,
I found out why your first suggestion didn't work on
my computer even after I corrected the typo
maths.bind in the sciword.bind file. I don't know
whether this works on Linux systems or not. However,
in the math.bind file I had the following:
\bind M-m ~C-~M-~S-braceleft math-delim { }
I am a new user who just installed lyx. Using the tutorial I worked on the
example document and found a problem in the math. To be sure, I opened the
example_lyxified.lyx document and the same problem appeared.
The equation that is represented by x=\frac{-b\pm\sqrt{b^{2}-4ac}}{2a} displays
On 12/11/05, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
I am a new user who just installed lyx. Using the tutorial I worked on the
example document and found a problem in the math. To be sure, I opened the
example_lyxified.lyx document and the same problem appeared.
The equation that is
Hi,
Charles de Miramon, 10.12.2005 17:35:
K. Elo wrote:
Hi,
Axel Dessecker, 9.12.2005 19:50:
Kimmo,
Am Freitag, 09. Dezember 2005 15:27 schrieb K. Elo:
1) The title should be followed by a footnote marked with *,
i.e. bla bla bla*
2) All other footnotes should be marked with
Nusret BALCI wrote:
The following doesn't harm in any serious way, but
it's a curious behavior.
I think Lyx doesn't handle well commands like \left\{,
\right\{
Try \left\lbrace and \right\rbrace.
\left(, \right),
These work fine for me.
etc. from the user interface.
Especially try
Stephen Harris wrote:
By the same issue as his I meant this part of your post,
Paul: The not as good news is that the same installation problem I
experienced in pre4 is present in pre5. (Recap: the configuration script
fails to execute during installation; the program launches ok at the end
I didn't notice the status bar change, indeed :).
Anyways, thanks to initial problem I learned quite a
bit about the key binding files and customized my
favorite one to my liking (well, still it needs some
work, but much better). Thanks for helpful comments.
Regards,
Nusret
--- Paul A. Rubin
Stephen Harris wrote:
- Original Message - From: Stephen Harris
[EMAIL PROTECTED]
To: lyx-users@lists.lyx.org; Paul A. Rubin
[EMAIL PROTECTED]
Sent: Saturday, December 10, 2005 6:14 PM
Subject: Re: Prerelease of LyX 1.3.7_5 for Windows
So I think the configure file has changed
K. Elo wrote:
Hi,
Charles de Miramon, 10.12.2005 17:35:
K. Elo wrote:
Hi,
Axel Dessecker, 9.12.2005 19:50:
Kimmo,
Am Freitag, 09. Dezember 2005 15:27 schrieb K. Elo:
1) The title should be followed by a footnote marked with *,
i.e. bla bla bla*
2) All other footnotes should be marked
Steve Litt wrote:
For my next book I'm using a derivative of the Memoir class.
My next book has two distinct parts that have two very different functions in
the book. Each needs an explanation, and because it's a book of short
stories, it would be inappropriate to have the first chapter in a
Hi Herbert,
Herbert Voss, 11.12.2005 22:08:
Another thing are urls within a \thanks. I tried to include my
email as a url, but all I've got were a bundle of Latex errors.
After examining my thick and quite expensive ;-) TLC2e, I figured
out the trick:
Preamble:
\usepackage{url}
K. Elo wrote:
This is exactly what Charles suggested - and this works, no doubt! But
because I did NOT know LyX being smart enough to interpret a footnote
directly after a title as \thanks, I just had to figure out a solution
of my own (why on earth would I have posted my question if I had
I am new to LyX and I do not know hot to setup it to work in my field of
study.
So my question would be.
How does install Devanagari and Tibetan font processing on LyX.
Could anyone give a detailed instructions?
Thank you for Your kindness...
robert jakobson.
On Sun, Dec 11, 2005 at 02:00:10PM +0530, Banibrata Dutta wrote:
Hi,
Hoping that some LaTeX experts here may be able to help me with a book
project which I am doing in LaTeX (instead of LyX).
Q-1) How do I leave a page Intetionally Blank, after the title page,
and before the abstract
I'd like to use 'hollywood' and 'broadway' layouts, and although they
(hollywood) are listed as present in the New from Template menu, I get a
Textclass error LyX will not be able to produce output.
Strugling my way in the LyX and MikTex sites, I could not find a clear
procedure to install
- Original Message -
From: Marcel Vercouter
To: lyx-users@lists.lyx.org
Sent: Monday, December 12, 2005 12:29 AM
Subject: installing Tex classes
I'd like to use 'hollywood' and 'broadway' layouts, and although they
(hollywood) are listed as present in the New from Template menu, I
I hope someone on the list can help me with this problem: I was just
about to the send a complete book-manuscript to the publisher, fixed a
few last references, and when I ran LyX again I got 900 errors. They
all concern BibTeX references. In fact, every single ref threw one or
two errors.
Paul A. Rubin [EMAIL PROTECTED] wrote in message
news:[EMAIL PROTECTED]
Stephen Harris wrote:
- Original Message - From: Stephen Harris
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]; Paul A. Rubin
rubin-mhe/[EMAIL PROTECTED]
Sent: Saturday, December 10, 2005 6:14 PM
Subject: Re: Prerelease
- Original Message -
From: Stephen Harris [EMAIL PROTECTED]
To: lyx-users@lists.lyx.org
Cc: Paul A. Rubin [EMAIL PROTECTED]
Sent: Sunday, December 11, 2005 6:29 PM
Subject: Re: Prerelease of LyX 1.3.7_5 for Windows
The set=CVSROOT should be on one line.
Solved.
It turns out that all hell breaks loose if you mistakenly insert a
bibliography file with the plain style and another with Jox (Jurabib)
style.
S.
On Dec 11, 2005, at 5:24 PM, Stefano Franchi wrote:
I hope someone on the list can help me with this problem: I was just
about to the
Georg Baum [EMAIL PROTECTED] writes:
Gunnar wrote:
Hi.
If one would like to send a LyX file that contains many pictures to
another person, one has to send all files to that person. When we are
talking about users with moderate experience of compressed files/creating
archives etc. I
Hi,
Herbert Voss, 11.12.2005 22:58:
K. Elo wrote:
This is exactly what Charles suggested - and this works, no doubt!
But because I did NOT know LyX being smart enough to interpret a
footnote directly after a title as \thanks, I just had to figure
out a solution of my own (why on earth
Hello!
I'm a relatively new user to LyX (installed it a couple of months ago
in my laptop, and I've barely scratched the surface of its
functionality). As it was, I figured that installing LyX into my work
system would be a good idea. So I downloaded the
LyXWin137preComplete-0-51.exe package for
- Original Message -
From: Tariq Kamal [EMAIL PROTECTED]
To: LyX Users Mailing List lyx-users@lists.lyx.org
Sent: Sunday, December 11, 2005 11:28 PM
Subject: There's Something About Textclass.lst [WinXP, installing into]
Hello!
Everything so far has failed, and I've run out of
Hi,
Hoping that some LaTeX experts here may be able to help me with a book
project which I am doing in LaTeX (instead of LyX).
Q-1) How do I leave a page Intetionally Blank, after the title page,
and before the abstract page, if I am using...
\documentclass[11pt,a4paper,titlepage]{article}
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi Barnibrata,
Banibrata Dutta schrieb:
| Hoping that some LaTeX experts here may be able to help me with a book
| project which I am doing in LaTeX (instead of LyX).
Personally, if I was you I would ask those questions in a TeX-Newsgroup
like
On 12/11/05, Nusret BALCI [EMAIL PROTECTED] wrote:
Thank you Paul. By the way, your suggestion uncovered
just another minor issue: I use sciword binding file.
It supposedly includes the math.bind file which
contains the binding you mentioned (but without
AltGr). However it didn't work. I
Paul,
I found out why your first suggestion didn't work on
my computer even after I corrected the typo
maths.bind in the sciword.bind file. I don't know
whether this works on Linux systems or not. However,
in the math.bind file I had the following:
\bind M-m ~C-~M-~S-braceleft math-delim { }
I am a new user who just installed lyx. Using the tutorial I worked on the
example document and found a problem in the math. To be sure, I opened the
example_lyxified.lyx document and the same problem appeared.
The equation that is represented by x=\frac{-b\pm\sqrt{b^{2}-4ac}}{2a} displays
On 12/11/05, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
I am a new user who just installed lyx. Using the tutorial I worked on the
example document and found a problem in the math. To be sure, I opened the
example_lyxified.lyx document and the same problem appeared.
The equation that is
Hi,
Charles de Miramon, 10.12.2005 17:35:
K. Elo wrote:
Hi,
Axel Dessecker, 9.12.2005 19:50:
Kimmo,
Am Freitag, 09. Dezember 2005 15:27 schrieb K. Elo:
1) The title should be followed by a footnote marked with *,
i.e. bla bla bla*
2) All other footnotes should be marked with
Nusret BALCI wrote:
The following doesn't harm in any serious way, but
it's a curious behavior.
I think Lyx doesn't handle well commands like \left\{,
\right\{
Try \left\lbrace and \right\rbrace.
\left(, \right),
These work fine for me.
etc. from the user interface.
Especially try
Stephen Harris wrote:
By the same issue as his I meant this part of your post,
Paul: The not as good news is that the same installation problem I
experienced in pre4 is present in pre5. (Recap: the configuration script
fails to execute during installation; the program launches ok at the end
I didn't notice the status bar change, indeed :).
Anyways, thanks to initial problem I learned quite a
bit about the key binding files and customized my
favorite one to my liking (well, still it needs some
work, but much better). Thanks for helpful comments.
Regards,
Nusret
--- Paul A. Rubin
Stephen Harris wrote:
- Original Message - From: Stephen Harris
[EMAIL PROTECTED]
To: lyx-users@lists.lyx.org; Paul A. Rubin
[EMAIL PROTECTED]
Sent: Saturday, December 10, 2005 6:14 PM
Subject: Re: Prerelease of LyX 1.3.7_5 for Windows
So I think the configure file has changed
K. Elo wrote:
Hi,
Charles de Miramon, 10.12.2005 17:35:
K. Elo wrote:
Hi,
Axel Dessecker, 9.12.2005 19:50:
Kimmo,
Am Freitag, 09. Dezember 2005 15:27 schrieb K. Elo:
1) The title should be followed by a footnote marked with *,
i.e. bla bla bla*
2) All other footnotes should be marked
Steve Litt wrote:
For my next book I'm using a derivative of the Memoir class.
My next book has two distinct parts that have two very different functions in
the book. Each needs an explanation, and because it's a book of short
stories, it would be inappropriate to have the first chapter in a
Hi Herbert,
Herbert Voss, 11.12.2005 22:08:
Another thing are urls within a \thanks. I tried to include my
email as a url, but all I've got were a bundle of Latex errors.
After examining my thick and quite expensive ;-) TLC2e, I figured
out the trick:
Preamble:
\usepackage{url}
K. Elo wrote:
This is exactly what Charles suggested - and this works, no doubt! But
because I did NOT know LyX being smart enough to interpret a footnote
directly after a title as \thanks, I just had to figure out a solution
of my own (why on earth would I have posted my question if I had
I am new to LyX and I do not know hot to setup it to work in my field of
study.
So my question would be.
How does install Devanagari and Tibetan font processing on LyX.
Could anyone give a detailed instructions?
Thank you for Your kindness...
robert jakobson.
On Sun, Dec 11, 2005 at 02:00:10PM +0530, Banibrata Dutta wrote:
Hi,
Hoping that some LaTeX experts here may be able to help me with a book
project which I am doing in LaTeX (instead of LyX).
Q-1) How do I leave a page Intetionally Blank, after the title page,
and before the abstract
I'd like to use 'hollywood' and 'broadway' layouts, and although they
(hollywood) are listed as present in the New from Template menu, I get a
Textclass error LyX will not be able to produce output.
Strugling my way in the LyX and MikTex sites, I could not find a clear
procedure to install
- Original Message -
From: Marcel Vercouter
To: lyx-users@lists.lyx.org
Sent: Monday, December 12, 2005 12:29 AM
Subject: installing Tex classes
I'd like to use 'hollywood' and 'broadway' layouts, and although they
(hollywood) are listed as present in the New from Template menu, I
I hope someone on the list can help me with this problem: I was just
about to the send a complete book-manuscript to the publisher, fixed a
few last references, and when I ran LyX again I got 900 errors. They
all concern BibTeX references. In fact, every single ref threw one or
two errors.
Paul A. Rubin [EMAIL PROTECTED] wrote in message
news:[EMAIL PROTECTED]
Stephen Harris wrote:
- Original Message - From: Stephen Harris
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]; Paul A. Rubin
rubin-mhe/[EMAIL PROTECTED]
Sent: Saturday, December 10, 2005 6:14 PM
Subject: Re: Prerelease
- Original Message -
From: Stephen Harris [EMAIL PROTECTED]
To: lyx-users@lists.lyx.org
Cc: Paul A. Rubin [EMAIL PROTECTED]
Sent: Sunday, December 11, 2005 6:29 PM
Subject: Re: Prerelease of LyX 1.3.7_5 for Windows
The set=CVSROOT should be on one line.
Solved.
It turns out that all hell breaks loose if you mistakenly insert a
bibliography file with the plain style and another with Jox (Jurabib)
style.
S.
On Dec 11, 2005, at 5:24 PM, Stefano Franchi wrote:
I hope someone on the list can help me with this problem: I was just
about to the
Georg Baum [EMAIL PROTECTED] writes:
Gunnar wrote:
Hi.
If one would like to send a LyX file that contains many pictures to
another person, one has to send all files to that person. When we are
talking about users with moderate experience of compressed files/creating
archives etc. I
Hi,
Herbert Voss, 11.12.2005 22:58:
K. Elo wrote:
This is exactly what Charles suggested - and this works, no doubt!
But because I did NOT know LyX being smart enough to interpret a
footnote directly after a title as \thanks, I just had to figure
out a solution of my own (why on earth
Hello!
I'm a relatively new user to LyX (installed it a couple of months ago
in my laptop, and I've barely scratched the surface of its
functionality). As it was, I figured that installing LyX into my work
system would be a good idea. So I downloaded the
LyXWin137preComplete-0-51.exe package for
- Original Message -
From: Tariq Kamal [EMAIL PROTECTED]
To: LyX Users Mailing List lyx-users@lists.lyx.org
Sent: Sunday, December 11, 2005 11:28 PM
Subject: There's Something About Textclass.lst [WinXP, installing into]
Hello!
Everything so far has failed, and I've run out of
Hi,
Hoping that some LaTeX experts here may be able to help me with a book
project which I am doing in LaTeX (instead of LyX).
Q-1) How do I leave a page "Intetionally Blank", after the title page,
and before the abstract page, if I am using...
\documentclass[11pt,a4paper,titlepage]{article}
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi Barnibrata,
Banibrata Dutta schrieb:
| Hoping that some LaTeX experts here may be able to help me with a book
| project which I am doing in LaTeX (instead of LyX).
Personally, if I was you I would ask those questions in a TeX-Newsgroup
like
On 12/11/05, Nusret BALCI <[EMAIL PROTECTED]> wrote:
> Thank you Paul. By the way, your suggestion uncovered
> just another minor issue: I use sciword binding file.
> It supposedly includes the math.bind file which
> contains the binding you mentioned (but without
> AltGr). However it didn't work.
Paul,
I found out why your first suggestion didn't work on
my computer even after I corrected the typo
"maths.bind" in the sciword.bind file. I don't know
whether this works on Linux systems or not. However,
in the math.bind file I had the following:
\bind "M-m ~C-~M-~S-braceleft" "math-delim {
I am a new user who just installed lyx. Using the tutorial I worked on the
example document and found a problem in the math. To be sure, I opened the
example_lyxified.lyx document and the same problem appeared.
The equation that is represented by x=\frac{-b\pm\sqrt{b^{2}-4ac}}{2a} displays
On 12/11/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> I am a new user who just installed lyx. Using the tutorial I worked on the
> example document and found a problem in the math. To be sure, I opened the
> example_lyxified.lyx document and the same problem appeared.
>
> The equation
Hi,
Charles de Miramon, 10.12.2005 17:35:
> K. Elo wrote:
> > Hi,
> >
> > Axel Dessecker, 9.12.2005 19:50:
> >> Kimmo,
> >>
> >> Am Freitag, 09. Dezember 2005 15:27 schrieb K. Elo:
> >> > 1) The title should be followed by a footnote marked with *,
> >> > i.e. bla bla bla*
> >> > 2) All other
Nusret BALCI wrote:
The following doesn't harm in any serious way, but
it's a curious behavior.
I think Lyx doesn't handle well commands like \left\{,
\right\{
Try \left\lbrace and \right\rbrace.
\left(, \right),
These work fine for me.
etc. from the user interface.
Especially try
Stephen Harris wrote:
By the "same issue as his" I meant this part of your post,
Paul: "The not as good news is that the same installation problem I
experienced in pre4 is present in pre5. (Recap: the configuration script
fails to execute during installation; the program launches ok at the
I didn't notice the status bar change, indeed :).
Anyways, thanks to initial problem I learned quite a
bit about the key binding files and customized my
favorite one to my liking (well, still it needs some
work, but much better). Thanks for helpful comments.
Regards,
Nusret
--- "Paul A. Rubin"
Stephen Harris wrote:
- Original Message - From: "Stephen Harris"
<[EMAIL PROTECTED]>
To: ; "Paul A. Rubin"
<[EMAIL PROTECTED]>
Sent: Saturday, December 10, 2005 6:14 PM
Subject: Re: Prerelease of LyX 1.3.7_5 for Windows
So I think the configure file has
K. Elo wrote:
Hi,
Charles de Miramon, 10.12.2005 17:35:
K. Elo wrote:
Hi,
Axel Dessecker, 9.12.2005 19:50:
Kimmo,
Am Freitag, 09. Dezember 2005 15:27 schrieb K. Elo:
1) The title should be followed by a footnote marked with *,
i.e. bla bla bla*
2) All other footnotes should be marked
Steve Litt wrote:
For my next book I'm using a derivative of the Memoir class.
My next book has two distinct parts that have two very different functions in
the book. Each needs an explanation, and because it's a book of short
stories, it would be inappropriate to have the first chapter in a
Hi Herbert,
Herbert Voss, 11.12.2005 22:08:
> > Another thing are urls within a \thanks. I tried to include my
> > email as a url, but all I've got were a bundle of Latex errors.
> > After examining my thick and quite expensive ;-) TLC2e, I figured
> > out the trick:
> >
> > Preamble:
> >
K. Elo wrote:
This is exactly what Charles suggested - and this works, no doubt! But
because I did NOT know LyX being smart enough to interpret a footnote
directly after a title as \thanks, I just had to figure out a solution
of my own (why on earth would I have posted my question if I had
I am new to LyX and I do not know hot to setup it to work in my field of
study.
So my question would be.
How does install Devanagari and Tibetan font processing on LyX.
Could anyone give a detailed instructions?
Thank you for Your kindness...
robert jakobson.
On Sun, Dec 11, 2005 at 02:00:10PM +0530, Banibrata Dutta wrote:
> Hi,
>
> Hoping that some LaTeX experts here may be able to help me with a book
> project which I am doing in LaTeX (instead of LyX).
>
> Q-1) How do I leave a page "Intetionally Blank", after the title page,
> and before the
I'd like to use 'hollywood' and 'broadway' layouts, and although they
(hollywood) are listed as present in the "New from Template" menu, I get a
Textclass error LyX will not be able to produce output.
Strugling my way in the LyX and MikTex sites, I could not find a clear
procedure to install
- Original Message -
From: Marcel Vercouter
To: lyx-users@lists.lyx.org
Sent: Monday, December 12, 2005 12:29 AM
Subject: installing Tex classes
I'd like to use 'hollywood' and 'broadway' layouts, and although they
(hollywood) are listed as present in the "New from Template" menu, I
I hope someone on the list can help me with this problem: I was just
about to the send a complete book-manuscript to the publisher, fixed a
few last references, and when I ran LyX again I got 900 errors. They
all concern BibTeX references. In fact, every single ref threw one or
two errors.
"Paul A. Rubin" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]
Stephen Harris wrote:
- Original Message - From: "Stephen Harris"
<[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; "Paul A. Rubin"
Sent: Saturday, December 10, 2005 6:14 PM
Subject: Re: Prerelease of LyX 1.3.7_5
- Original Message -
From: "Stephen Harris" <[EMAIL PROTECTED]>
To:
Cc: "Paul A. Rubin" <[EMAIL PROTECTED]>
Sent: Sunday, December 11, 2005 6:29 PM
Subject: Re: Prerelease of LyX 1.3.7_5 for Windows
The set=CVSROOT should be on one line.
Solved.
It turns out that all hell breaks loose if you mistakenly insert a
bibliography file with the plain style and another with Jox (Jurabib)
style.
S.
On Dec 11, 2005, at 5:24 PM, Stefano Franchi wrote:
I hope someone on the list can help me with this problem: I was just
about to the
Georg Baum <[EMAIL PROTECTED]> writes:
>
> Gunnar wrote:
>
> > Hi.
> > If one would like to send a LyX file that contains many pictures to
> > another person, one has to send all files to that person. When we are
> > talking about users with moderate experience of compressed files/creating
> >
Hi,
Herbert Voss, 11.12.2005 22:58:
> K. Elo wrote:
> > This is exactly what Charles suggested - and this works, no doubt!
> > But because I did NOT know LyX being smart enough to interpret a
> > footnote directly after a title as \thanks, I just had to figure
> > out a solution of my own (why on
Hello!
I'm a relatively new user to LyX (installed it a couple of months ago
in my laptop, and I've barely scratched the surface of its
functionality). As it was, I figured that installing LyX into my work
system would be a good idea. So I downloaded the
LyXWin137preComplete-0-51.exe package for
- Original Message -
From: "Tariq Kamal" <[EMAIL PROTECTED]>
To: "LyX Users Mailing List"
Sent: Sunday, December 11, 2005 11:28 PM
Subject: There's Something About Textclass.lst [WinXP, installing into]
Hello!
Everything so far has failed, and I've run out
81 matches
Mail list logo