Hello,
I have some problems with my fresh installed lyx 1.5 beta 3. When I open
a dialog (open file, save file, insert image, ...) which uses
informations from filesystem (i.e. directory listing), die dialog hangs
for a while. It seems there is an timeout.
Is it possible, that the dialog is
After experiencing tons of weird LaTeX errors, and reading this:
http://www.tex.ac.uk/cgi-bin/texfaq2html?label=erroradvice, I found that
the use of scrheadings was responsible for the weird behaviour.
I rewrote the preamble and fine-combed my ERT parts, and finally all
traces of scrheadings
I have installed lyx 1.5 beta 3 version (I used 1.4.4), and I have a
few problems
1) Crashes are frequent, for reasons which remain obscure to me.
2) When I open some documents (created in version 1.4.4) the preview
of mathematical formula only works for new formulae, for some others
it
Works a charm, thanks Charles!
Deane
Jean == Jean Kaplan [EMAIL PROTECTED] writes:
Jean I have installed lyx 1.5 beta 3 version (I used 1.4.4), and I
Jean have a few problems 1) Crashes are frequent, for reasons which
Jean remain obscure to me. 2) When I open some documents (created in
Jean version 1.4.4) the preview of
Can you export this to LaTeX and post the output here?
Trevor Nicholls wrote:
This has got to be a LyX or LaTeX FAQ but Google isn't helping me much and
my LaTeX books haven't arrived yet...
I have set up two character styles, XYZkeyword and XYZvar. They are defined
in an xyz_classes.inc
Hi
Steve had the solution - my thanks to him obviously weren't cc'ed to the
list.
I wondered why so many code samples I saw had these comment characters hard
up against the end of every line - and now I know.
Cheers
T
-Original Message-
From: Richard Heck [mailto:[EMAIL PROTECTED]
I'm starting to write my thesis in Lyx and it so happens that I need to use
microns(?) in my physical units alot. But I can't get a non-italic ? in math
mode. Unicode doesn't seem to work either I get error messages:
Package inputenc Error: Unicode char \u8:μ not set up for use with LaTeX.
I use the SIunits package for latex to do all my units. It is a bit
cumbersome until you get the hang of it but then works great. I just
include it in the LyX preamble, here is what I use in the preamble for
siunits:
% new commands using SIunits.sty %%%
Steed, Robert J [EMAIL PROTECTED] writes:
I'm starting to write my thesis in Lyx and it so happens that I need to use
microns(?) in my physical units
alot. But I can't get a non-italic ? in math mode. Unicode doesn't seem to
work either I get error messages:
Package inputenc Error:
I think that its working. I have to use ERT to do it, right?
Thanks for the speedy reply.
Rob
-Original Message-
From: Brian Larsen [mailto:[EMAIL PROTECTED]
Sent: Wed 30/05/2007 15:40
To: Steed, Robert J
Cc: lyx-users@lists.lyx.org
Subject: Re: Physical units
I use the SIunits
Hello,
I want to export an example in beta 3 format to 1.4.x
or 1.3.x format. When I make an export I get an error:
An eror ocurred whiist running phthon -tt
usr/local/share/lyx-1.5.0b3/lyx2lyx/l
Is this a know bug?
Marcelo
On 5/30/07, Marcelo Acuña [EMAIL PROTECTED] wrote:
Hello,
I want to export an example in beta 3 format to 1.4.x
or 1.3.x format. When I make an export I get an error:
An eror ocurred whiist running phthon -tt
usr/local/share/lyx-1.5.0b3/lyx2lyx/l
Is this a know bug?
No.
Please give us
Hello,
I want to export an example in beta 3 format to
1.4.x
or 1.3.x format. When I make an export I get an
error:
An eror ocurred whiist running phthon -tt
usr/local/share/lyx-1.5.0b3/lyx2lyx/l
Is this a know bug?
No.
Please give us more information such as the file to
opensuse 10.2, kde 3.5, the file is big file (300.000
words) in koma script style
Marcelo
There are some known problems with back conversion, but your problem
seems to be with how lyx2lyx is called. Are you sure the error message
is
python -tt usr/local/share/lyx-1.5.0b3/lyx2lyx/l
not
opensuse 10.2, kde 3.5, the file is big file
(300.000
words) in koma script style
Marcelo
There are some known problems with back conversion,
but your problem
seems to be with how lyx2lyx is called. Are you sure
the error message
is
python -tt
I am sure that is
python -tt usr/local/share/lyx-1.5.0b3/lyx2lyx/l
without at the end, but may be 1 o l the final
Then, can you manually convert your file? I mean, under a command prompt, run
python -tt /usr/local/share/lyx-1.5.0b3/lyx2lyx/lyx2lyx -t 221
yourfile.lyx newfile.lyx
Bo
I am sure that is
python -tt usr/local/share/lyx-1.5.0b3/lyx2lyx/l
without at the end, but may be 1 o l the final
Then, can you manually convert your file? I mean,
under a command prompt, run
python -tt
/usr/local/share/lyx-1.5.0b3/lyx2lyx/lyx2lyx -t 221
yourfile.lyx
You could probably create a macro for it, which would make the input
much easier --- you would only need to use the ERT once, when creating
the macro. (I haven't use the SIunits package, maybe it's simple enough
to use that macros are not even necessary; but if you find yourself
typing a lot
Hi!
However there are some problems that I need to fix (I use Book as document
class, Lyx 1.4.3):
I never used book class...
1. The bookmarks to some sections such as Acknowledgement, Glossary etc
point to wrong pages.
How?
Like one or two section before that?
Put in a page beak before
Steed, Robert J schrieb:
I'm starting to write my thesis in Lyx and it so happens that I need to use
microns(?) in my physical units alot. But I can't get a non-italic ? in math
mode. Unicode doesn't seem to work either I get error messages:
Package inputenc Error: Unicode char \u8:μ not
This is very helpful to me. Thanks for posting this.
One thing I did find strange is that it would only
work when the table was left justified. If I tried to
center and scale it I received an error during the
latex run.
So, at least for now, I have to settle for keeping the
tables on the left
Hello
Attached is an example of the .lyx file and resultant pdf that show the
problems with long titles, captions and referencing to wrong pages for
Abstract, Acknowledgements, etc.
Also, I have not figured out how to add hyperref to bibliographic references
yet. Please help.
Thank you
Leo
On Wednesday 30 May 2007 10:40, Brian Larsen wrote:
I use the SIunits package for latex to do all my units.
[=]
It is a bit
cumbersome until you get the hang of it but then works great.
I think the preceding sentence sums up working with LyX, LaTeX and TeX.
SteveT
Hi,
You can center scaled tables by enclosing them in
\begin{center}
\end{center}
See the included example file.
-- Christian
Robert Orr wrote:
This is very helpful to me. Thanks for posting this.
One thing I did find strange is that it would only
work when the table was left justified.
I will use it often.
Thanks.
Phil
--- Christian Liesen [EMAIL PROTECTED] wrote:
Hi,
You can center scaled tables by enclosing them in
\begin{center}
\end{center}
See the included example file.
-- Christian
Robert Orr wrote:
This is very helpful to me. Thanks for posting
Is there a way of getting code listings to continue onto another page using
float algorithm.
If not, does the latest beta version support a multi-page float algorithm.
Thanks
On 5/30/07, Graham Griffiths [EMAIL PROTECTED] wrote:
Is there a way of getting code listings to continue onto another page using
float algorithm.
If not, does the latest beta version support a multi-page float algorithm.
You can use the new listings inset (and child document) in lyx
Then, can you manually convert your file? I mean,
under a command prompt, run
python -tt
/usr/local/share/lyx-1.5.0b3/lyx2lyx/lyx2lyx -t 221
yourfile.lyx newfile.lyx
Bo
With this command I can run lyx2lyx but I get several
errors and I can´t get a file correctly exported.
I get this
With this command I can run lyx2lyx but I get several
errors and I can´t get a file correctly exported.
I get this message:
UnicodeEncodeError: latin-1 codec can´t encode
character u\u0301 in position 0: ordinal not in
range(256)
I also see this with a few other files and I will work on it.
With this command I can run lyx2lyx but I get
several
errors and I can´t get a file correctly exported.
I get this message:
UnicodeEncodeError: latin-1 codec can´t encode
character u\u0301 in position 0: ordinal not in
range(256)
I also see this with a few other files and I
What is RC2, RC1?
Lyx 1.5.0 is now at beta3 testing stage. The next testing release will
be called release candidate 1 (RC1), which is planned to be released
soon (this weekend?). There will likely to be a RC2 release before
1.5.0 is officially released.
Cheers,
Bo
What is RC2, RC1?
Lyx 1.5.0 is now at beta3 testing stage. The next
testing release will
be called release candidate 1 (RC1), which is
planned to be released
soon (this weekend?). There will likely to be a RC2
release before
1.5.0 is officially released.
Cheers,
Bo
Ok. I will
[EMAIL PROTECTED] wrote:
Hi,
Someone going under 'LyXWinUser' placed the following on a wiki page
called Site.FAQ. That page is intendend for question regarding the use
of the wiki, and not issues related to using LyX. So I'm posting the
question here, hoping that 'LyXWinUser' will get an
LB schrieb:
I have added the following code (I took it from EmbeddedObjects.lyx) to the
preamble of my document
However there are some problems that I need to fix (I use Book as document
class, Lyx 1.4.3):
1. The bookmarks to some sections such as Acknowledgement, Glossary etc
point to
Hi
Well, this example file did not work for me with ps2pdf. So I decided to
try pdflatex and that worked.
Unfortunately pdflatex does not like my real document. When I try to view
the real document I get a message There was an arror opening this document.
The file is damaged and could not be
I put the script as code listing (see http://wiki.lyx.org/Mac/
Mac#toc6). It would be more convenient to give it as a file named
og-export.scpt. Could anyone give me the upload password?
Nobody could send this password to me?
It may exist as it is mentionned in the Wiki! ;)
I'd like to
Thanks Bo, I will upgrade and try your suggestion.
Regards,
Graham
Tino Langer wrote:
Hello,
I have some problems with my fresh installed lyx 1.5 beta 3. When I open
a dialog (open file, save file, insert image, ...) which uses
informations from filesystem (i.e. directory listing), die dialog hangs
for a while. It seems there is an timeout.
Is it
Sometimes Lyx does not detect that I've changed a child document and when I
select View-update-pdf(pdflatex), it does not regenerate the pdf. The only
work around I've found is make changes that have no effect like adding blank
lines to ERT in the top level document.
Is there a better way?
LB schrieb:
Well, this example file did not work for me with ps2pdf. So I decided to
try pdflatex and that worked.
Unfortunately pdflatex does not like my real document. When I try to view
the real document I get a message There was an arror opening this document.
The file is damaged and
There are two math toolbars now. The ordinary one and the former math panel.
You can open it via View-Toolbars-Math Panel.
Jürgen
In that case I think that the User's Guide needs updating as it still states in Section
5.1.6 The Math Panel dialog (accesable via InsertMath.
Roger
Dear LyX
On May 30, 2007, at 7:53 PM, Maria Gouskova wrote:
I think the Math Panel really IS gone in LyX 1.5.0b3, Intel, Mac OS
10.4.9. I've tried reinstalling and reconfiguring LyX, to no avail.
There is no VIewToolbarsMath Panel, only ViewToolbarsMath. The
Math toolbar works but lacks most of the Math
I think the Math Panel really IS gone in LyX 1.5.0b3, Intel, Mac OS
10.4.9. I've tried reinstalling and reconfiguring LyX, to no avail.
There is no VIewToolbarsMath Panel, only ViewToolbarsMath. The
Math toolbar works but lacks most of the Math Panel options (arrows,
Greek, etc). Nothing
Hello,
I have some problems with my fresh installed lyx 1.5 beta 3. When I open
a dialog (open file, save file, insert image, ...) which uses
informations from filesystem (i.e. directory listing), die dialog hangs
for a while. It seems there is an timeout.
Is it possible, that the dialog is
After experiencing tons of weird LaTeX errors, and reading this:
http://www.tex.ac.uk/cgi-bin/texfaq2html?label=erroradvice, I found that
the use of scrheadings was responsible for the weird behaviour.
I rewrote the preamble and fine-combed my ERT parts, and finally all
traces of scrheadings
I have installed lyx 1.5 beta 3 version (I used 1.4.4), and I have a
few problems
1) Crashes are frequent, for reasons which remain obscure to me.
2) When I open some documents (created in version 1.4.4) the preview
of mathematical formula only works for new formulae, for some others
it
Works a charm, thanks Charles!
Deane
Jean == Jean Kaplan [EMAIL PROTECTED] writes:
Jean I have installed lyx 1.5 beta 3 version (I used 1.4.4), and I
Jean have a few problems 1) Crashes are frequent, for reasons which
Jean remain obscure to me. 2) When I open some documents (created in
Jean version 1.4.4) the preview of
Can you export this to LaTeX and post the output here?
Trevor Nicholls wrote:
This has got to be a LyX or LaTeX FAQ but Google isn't helping me much and
my LaTeX books haven't arrived yet...
I have set up two character styles, XYZkeyword and XYZvar. They are defined
in an xyz_classes.inc
Hi
Steve had the solution - my thanks to him obviously weren't cc'ed to the
list.
I wondered why so many code samples I saw had these comment characters hard
up against the end of every line - and now I know.
Cheers
T
-Original Message-
From: Richard Heck [mailto:[EMAIL PROTECTED]
I'm starting to write my thesis in Lyx and it so happens that I need to use
microns(?) in my physical units alot. But I can't get a non-italic ? in math
mode. Unicode doesn't seem to work either I get error messages:
Package inputenc Error: Unicode char \u8:μ not set up for use with LaTeX.
I use the SIunits package for latex to do all my units. It is a bit
cumbersome until you get the hang of it but then works great. I just
include it in the LyX preamble, here is what I use in the preamble for
siunits:
% new commands using SIunits.sty %%%
Steed, Robert J [EMAIL PROTECTED] writes:
I'm starting to write my thesis in Lyx and it so happens that I need to use
microns(?) in my physical units
alot. But I can't get a non-italic ? in math mode. Unicode doesn't seem to
work either I get error messages:
Package inputenc Error:
I think that its working. I have to use ERT to do it, right?
Thanks for the speedy reply.
Rob
-Original Message-
From: Brian Larsen [mailto:[EMAIL PROTECTED]
Sent: Wed 30/05/2007 15:40
To: Steed, Robert J
Cc: lyx-users@lists.lyx.org
Subject: Re: Physical units
I use the SIunits
Hello,
I want to export an example in beta 3 format to 1.4.x
or 1.3.x format. When I make an export I get an error:
An eror ocurred whiist running phthon -tt
usr/local/share/lyx-1.5.0b3/lyx2lyx/l
Is this a know bug?
Marcelo
On 5/30/07, Marcelo Acuña [EMAIL PROTECTED] wrote:
Hello,
I want to export an example in beta 3 format to 1.4.x
or 1.3.x format. When I make an export I get an error:
An eror ocurred whiist running phthon -tt
usr/local/share/lyx-1.5.0b3/lyx2lyx/l
Is this a know bug?
No.
Please give us
Hello,
I want to export an example in beta 3 format to
1.4.x
or 1.3.x format. When I make an export I get an
error:
An eror ocurred whiist running phthon -tt
usr/local/share/lyx-1.5.0b3/lyx2lyx/l
Is this a know bug?
No.
Please give us more information such as the file to
opensuse 10.2, kde 3.5, the file is big file (300.000
words) in koma script style
Marcelo
There are some known problems with back conversion, but your problem
seems to be with how lyx2lyx is called. Are you sure the error message
is
python -tt usr/local/share/lyx-1.5.0b3/lyx2lyx/l
not
opensuse 10.2, kde 3.5, the file is big file
(300.000
words) in koma script style
Marcelo
There are some known problems with back conversion,
but your problem
seems to be with how lyx2lyx is called. Are you sure
the error message
is
python -tt
I am sure that is
python -tt usr/local/share/lyx-1.5.0b3/lyx2lyx/l
without at the end, but may be 1 o l the final
Then, can you manually convert your file? I mean, under a command prompt, run
python -tt /usr/local/share/lyx-1.5.0b3/lyx2lyx/lyx2lyx -t 221
yourfile.lyx newfile.lyx
Bo
I am sure that is
python -tt usr/local/share/lyx-1.5.0b3/lyx2lyx/l
without at the end, but may be 1 o l the final
Then, can you manually convert your file? I mean,
under a command prompt, run
python -tt
/usr/local/share/lyx-1.5.0b3/lyx2lyx/lyx2lyx -t 221
yourfile.lyx
You could probably create a macro for it, which would make the input
much easier --- you would only need to use the ERT once, when creating
the macro. (I haven't use the SIunits package, maybe it's simple enough
to use that macros are not even necessary; but if you find yourself
typing a lot
Hi!
However there are some problems that I need to fix (I use Book as document
class, Lyx 1.4.3):
I never used book class...
1. The bookmarks to some sections such as Acknowledgement, Glossary etc
point to wrong pages.
How?
Like one or two section before that?
Put in a page beak before
Steed, Robert J schrieb:
I'm starting to write my thesis in Lyx and it so happens that I need to use
microns(?) in my physical units alot. But I can't get a non-italic ? in math
mode. Unicode doesn't seem to work either I get error messages:
Package inputenc Error: Unicode char \u8:μ not
This is very helpful to me. Thanks for posting this.
One thing I did find strange is that it would only
work when the table was left justified. If I tried to
center and scale it I received an error during the
latex run.
So, at least for now, I have to settle for keeping the
tables on the left
Hello
Attached is an example of the .lyx file and resultant pdf that show the
problems with long titles, captions and referencing to wrong pages for
Abstract, Acknowledgements, etc.
Also, I have not figured out how to add hyperref to bibliographic references
yet. Please help.
Thank you
Leo
On Wednesday 30 May 2007 10:40, Brian Larsen wrote:
I use the SIunits package for latex to do all my units.
[=]
It is a bit
cumbersome until you get the hang of it but then works great.
I think the preceding sentence sums up working with LyX, LaTeX and TeX.
SteveT
Hi,
You can center scaled tables by enclosing them in
\begin{center}
\end{center}
See the included example file.
-- Christian
Robert Orr wrote:
This is very helpful to me. Thanks for posting this.
One thing I did find strange is that it would only
work when the table was left justified.
I will use it often.
Thanks.
Phil
--- Christian Liesen [EMAIL PROTECTED] wrote:
Hi,
You can center scaled tables by enclosing them in
\begin{center}
\end{center}
See the included example file.
-- Christian
Robert Orr wrote:
This is very helpful to me. Thanks for posting
Is there a way of getting code listings to continue onto another page using
float algorithm.
If not, does the latest beta version support a multi-page float algorithm.
Thanks
On 5/30/07, Graham Griffiths [EMAIL PROTECTED] wrote:
Is there a way of getting code listings to continue onto another page using
float algorithm.
If not, does the latest beta version support a multi-page float algorithm.
You can use the new listings inset (and child document) in lyx
Then, can you manually convert your file? I mean,
under a command prompt, run
python -tt
/usr/local/share/lyx-1.5.0b3/lyx2lyx/lyx2lyx -t 221
yourfile.lyx newfile.lyx
Bo
With this command I can run lyx2lyx but I get several
errors and I can´t get a file correctly exported.
I get this
With this command I can run lyx2lyx but I get several
errors and I can´t get a file correctly exported.
I get this message:
UnicodeEncodeError: latin-1 codec can´t encode
character u\u0301 in position 0: ordinal not in
range(256)
I also see this with a few other files and I will work on it.
With this command I can run lyx2lyx but I get
several
errors and I can´t get a file correctly exported.
I get this message:
UnicodeEncodeError: latin-1 codec can´t encode
character u\u0301 in position 0: ordinal not in
range(256)
I also see this with a few other files and I
What is RC2, RC1?
Lyx 1.5.0 is now at beta3 testing stage. The next testing release will
be called release candidate 1 (RC1), which is planned to be released
soon (this weekend?). There will likely to be a RC2 release before
1.5.0 is officially released.
Cheers,
Bo
What is RC2, RC1?
Lyx 1.5.0 is now at beta3 testing stage. The next
testing release will
be called release candidate 1 (RC1), which is
planned to be released
soon (this weekend?). There will likely to be a RC2
release before
1.5.0 is officially released.
Cheers,
Bo
Ok. I will
[EMAIL PROTECTED] wrote:
Hi,
Someone going under 'LyXWinUser' placed the following on a wiki page
called Site.FAQ. That page is intendend for question regarding the use
of the wiki, and not issues related to using LyX. So I'm posting the
question here, hoping that 'LyXWinUser' will get an
LB schrieb:
I have added the following code (I took it from EmbeddedObjects.lyx) to the
preamble of my document
However there are some problems that I need to fix (I use Book as document
class, Lyx 1.4.3):
1. The bookmarks to some sections such as Acknowledgement, Glossary etc
point to
Hi
Well, this example file did not work for me with ps2pdf. So I decided to
try pdflatex and that worked.
Unfortunately pdflatex does not like my real document. When I try to view
the real document I get a message There was an arror opening this document.
The file is damaged and could not be
I put the script as code listing (see http://wiki.lyx.org/Mac/
Mac#toc6). It would be more convenient to give it as a file named
og-export.scpt. Could anyone give me the upload password?
Nobody could send this password to me?
It may exist as it is mentionned in the Wiki! ;)
I'd like to
Thanks Bo, I will upgrade and try your suggestion.
Regards,
Graham
Tino Langer wrote:
Hello,
I have some problems with my fresh installed lyx 1.5 beta 3. When I open
a dialog (open file, save file, insert image, ...) which uses
informations from filesystem (i.e. directory listing), die dialog hangs
for a while. It seems there is an timeout.
Is it
Sometimes Lyx does not detect that I've changed a child document and when I
select View-update-pdf(pdflatex), it does not regenerate the pdf. The only
work around I've found is make changes that have no effect like adding blank
lines to ERT in the top level document.
Is there a better way?
LB schrieb:
Well, this example file did not work for me with ps2pdf. So I decided to
try pdflatex and that worked.
Unfortunately pdflatex does not like my real document. When I try to view
the real document I get a message There was an arror opening this document.
The file is damaged and
There are two math toolbars now. The ordinary one and the former math panel.
You can open it via View-Toolbars-Math Panel.
Jürgen
In that case I think that the User's Guide needs updating as it still states in Section
5.1.6 The Math Panel dialog (accesable via InsertMath.
Roger
Dear LyX
On May 30, 2007, at 7:53 PM, Maria Gouskova wrote:
I think the Math Panel really IS gone in LyX 1.5.0b3, Intel, Mac OS
10.4.9. I've tried reinstalling and reconfiguring LyX, to no avail.
There is no VIewToolbarsMath Panel, only ViewToolbarsMath. The
Math toolbar works but lacks most of the Math
I think the Math Panel really IS gone in LyX 1.5.0b3, Intel, Mac OS
10.4.9. I've tried reinstalling and reconfiguring LyX, to no avail.
There is no VIewToolbarsMath Panel, only ViewToolbarsMath. The
Math toolbar works but lacks most of the Math Panel options (arrows,
Greek, etc). Nothing
Hello,
I have some problems with my fresh installed lyx 1.5 beta 3. When I open
a dialog (open file, save file, insert image, ...) which uses
informations from filesystem (i.e. directory listing), die dialog hangs
for a while. It seems there is an timeout.
Is it possible, that the dialog is
After experiencing tons of weird LaTeX errors, and reading this:
http://www.tex.ac.uk/cgi-bin/texfaq2html?label=erroradvice, I found that
the use of scrheadings was responsible for the weird behaviour.
I rewrote the preamble and fine-combed my ERT parts, and finally all
traces of scrheadings
I have installed lyx 1.5 beta 3 version (I used 1.4.4), and I have a
few problems
1) Crashes are frequent, for reasons which remain obscure to me.
2) When I open some documents (created in version 1.4.4) the preview
of mathematical formula only works for new formulae, for some others
it
Works a charm, thanks Charles!
Deane
> "Jean" == Jean Kaplan <[EMAIL PROTECTED]> writes:
Jean> I have installed lyx 1.5 beta 3 version (I used 1.4.4), and I
Jean> have a few problems 1) Crashes are frequent, for reasons which
Jean> remain obscure to me. 2) When I open some documents (created in
Jean> version 1.4.4) the preview
Can you export this to LaTeX and post the output here?
Trevor Nicholls wrote:
> This has got to be a LyX or LaTeX FAQ but Google isn't helping me much and
> my LaTeX books haven't arrived yet...
>
> I have set up two character styles, XYZkeyword and XYZvar. They are defined
> in an
Hi
Steve had the solution - my thanks to him obviously weren't cc'ed to the
list.
I wondered why so many code samples I saw had these comment characters hard
up against the end of every line - and now I know.
Cheers
T
-Original Message-
From: Richard Heck [mailto:[EMAIL PROTECTED]
I'm starting to write my thesis in Lyx and it so happens that I need to use
microns(?) in my physical units alot. But I can't get a non-italic ? in math
mode. Unicode doesn't seem to work either I get error messages:
Package inputenc Error: Unicode char \u8:μ not set up for use with LaTeX.
I use the SIunits package for latex to do all my units. It is a bit
cumbersome until you get the hang of it but then works great. I just
include it in the LyX preamble, here is what I use in the preamble for
siunits:
% new commands using SIunits.sty %%%
Steed, Robert J <[EMAIL PROTECTED]> writes:
>
> I'm starting to write my thesis in Lyx and it so happens that I need to use
microns(?) in my physical units
> alot. But I can't get a non-italic ? in math mode. Unicode doesn't seem to
work either I get error messages:
>
> Package inputenc
I think that its working. I have to use ERT to do it, right?
Thanks for the speedy reply.
Rob
-Original Message-
From: Brian Larsen [mailto:[EMAIL PROTECTED]
Sent: Wed 30/05/2007 15:40
To: Steed, Robert J
Cc: lyx-users@lists.lyx.org
Subject: Re: Physical units
I use the SIunits
Hello,
I want to export an example in beta 3 format to 1.4.x
or 1.3.x format. When I make an export I get an error:
An eror ocurred whiist running phthon -tt
"usr/local/share/lyx-1.5.0b3/lyx2lyx/l
Is this a know bug?
Marcelo
1 - 100 of 132 matches
Mail list logo