they are latex errors
ususlly commands that the soft does not recognise or that it claims to
be ended by another command.
wht did not happen before upgrading
Herbert Voss wrote:
Rodrigo Esteves de Lima-Lopes wrote:
I was writing my dissertation under lyx 1.0.3 and updated to 1.1.16
they are latex errors
ususlly commands that the soft does not recognise or that it claims to
be ended by another command.
wht did not happen before upgrading
Herbert Voss wrote:
Rodrigo Esteves de Lima-Lopes wrote:
I was writing my dissertation under lyx 1.0.3 and updated to 1.1.16
they are latex errors
ususlly commands that the soft does not recognise or that it claims to
be ended by another command.
wht did not happen before upgrading
Herbert Voss wrote:
>
> Rodrigo Esteves de Lima-Lopes wrote:
> >
> > I was writing my dissertation under lyx
Hi folks,
I was writing my dissertation under lyx 1.0.3 and updated to 1.1.16.
However a doc file which would compile just ok under the older version
now does not work on 1.1.16 (there appears over 140 erros). The file
has not been changed at all
how can i sort it out?
thanks!
Hi folks,
I was writing my dissertation under lyx 1.0.3 and updated to 1.1.16.
However a doc file which would compile just ok under the older version
now does not work on 1.1.16 (there appears over 140 erros). The file
has not been changed at all
how can i sort it out?
thanks!
Hi folks,
I was writing my dissertation under lyx 1.0.3 and updated to 1.1.16.
However a doc file which would compile just ok under the older version
now does not work on 1.1.16 (there appears over 140 erros). The file
has not been changed at all
how can i sort it out?
thanks!
Hi
I am using apalike and natbib packages to format my blibliography and
print an output like
(author, 1991: 21)
I'm using lyx 1.1.3
But all sudenly, without any change onde the lyx file my references
started tobe printed in a number based mode:
(21: 12)
I did not do any change on my lyx
Hi
I am using apalike and natbib packages to format my blibliography and
print an output like
(author, 1991: 21)
I'm using lyx 1.1.3
But all sudenly, without any change onde the lyx file my references
started tobe printed in a number based mode:
(21: 12)
I did not do any change on my lyx
Hi
I am using apalike and natbib packages to format my blibliography and
print an output like
(author, 1991: 21)
I'm using lyx 1.1.3
But all sudenly, without any change onde the lyx file my references
started tobe printed in a number based mode:
(21: 12)
I did not do any change on my lyx
if you write n your preamble:
\usepackage{times}
it will deliver a much more readble pdf, but you might get a
'windows-like' font-effect.
cheers
[]s
lima-lopes
R.E. de Lima-Lopes
[EMAIL PROTECTED]
GNU/Linux Registered User # 182240
On 12 Jul 2001, Myriam Abramson wrote:
if you write n your preamble:
\usepackage{times}
it will deliver a much more readble pdf, but you might get a
'windows-like' font-effect.
cheers
[]s
lima-lopes
R.E. de Lima-Lopes
[EMAIL PROTECTED]
GNU/Linux Registered User # 182240
On 12 Jul 2001, Myriam Abramson wrote:
if you write n your preamble:
\usepackage{times}
it will deliver a much more readble pdf, but you might get a
'windows-like' font-effect.
cheers
[]s
lima-lopes
R.E. de Lima-Lopes
[EMAIL PROTECTED]
GNU/Linux Registered User # 182240
On 12 Jul 2001, Myriam Abramson wrote:
Hi
I et. al means and others (in latin), and it is used in some
bibliographich styles to supress authors names, when they are more than 3.
Apa like will process such abreviation only in the citation, in the body
of the text, but not in the bibliography, when all the authors are
present.
For
Hi
I et. al means and others (in latin), and it is used in some
bibliographich styles to supress authors names, when they are more than 3.
Apa like will process such abreviation only in the citation, in the body
of the text, but not in the bibliography, when all the authors are
present.
For
Hi
I et. al means and others (in latin), and it is used in some
bibliographich styles to supress authors names, when they are more than 3.
Apa like will process such abreviation only in the citation, in the body
of the text, but not in the bibliography, when all the authors are
present.
For
Hi...
I got a three pages long table, since I cannot use a float with it, what
is the best sollution for my problem, since it shall appear on tehlist of
tables?
many thanks!!!
[]s
lima-lopes
R.E. de Lima-Lopes
[EMAIL PROTECTED]
GNU/Linux Registered User # 182240
Hi...
I got a three pages long table, since I cannot use a float with it, what
is the best sollution for my problem, since it shall appear on tehlist of
tables?
many thanks!!!
[]s
lima-lopes
R.E. de Lima-Lopes
[EMAIL PROTECTED]
GNU/Linux Registered User # 182240
Hi...
I got a three pages long table, since I cannot use a float with it, what
is the best sollution for my problem, since it shall appear on tehlist of
tables?
many thanks!!!
[]s
lima-lopes
R.E. de Lima-Lopes
[EMAIL PROTECTED]
GNU/Linux Registered User # 182240
I got it here
if u wish i may send it to your personnal address
[]s
lima-lopes
R.E. de Lima-Lopes
[EMAIL PROTECTED]
GNU/Linux Registered User # 182240
On Tue, 22 May 2001, Jerome FARINAS wrote:
Date: Tue, 22 May 2001 18:59:18 +0200
From: Jerome FARINAS [EMAIL PROTECTED]
i don't know any latex command, but you can do it pretty well under linux
or unix envoirment though 'sort' command, which is part of
text-utilities.
However, I think you'll have to have pure ask data, what is not hard to
get
[]s
lima-lopes
R.E. de Lima-Lopes
[EMAIL
I got it here
if u wish i may send it to your personnal address
[]s
lima-lopes
R.E. de Lima-Lopes
[EMAIL PROTECTED]
GNU/Linux Registered User # 182240
On Tue, 22 May 2001, Jerome FARINAS wrote:
Date: Tue, 22 May 2001 18:59:18 +0200
From: Jerome FARINAS [EMAIL PROTECTED]
i don't know any latex command, but you can do it pretty well under linux
or unix envoirment though 'sort' command, which is part of
text-utilities.
However, I think you'll have to have pure ask data, what is not hard to
get
[]s
lima-lopes
R.E. de Lima-Lopes
[EMAIL
I got it here
if u wish i may send it to your personnal address
[]s
lima-lopes
R.E. de Lima-Lopes
[EMAIL PROTECTED]
GNU/Linux Registered User # 182240
On Tue, 22 May 2001, Jerome FARINAS wrote:
> Date: Tue, 22 May 2001 18:59:18 +0200
> From: Jerome FARINAS <[EMAIL
i don't know any latex command, but you can do it pretty well under linux
or unix envoirment though 'sort' command, which is part of
text-utilities.
However, I think you'll have to have pure ask data, what is not hard to
get
[]s
lima-lopes
R.E. de Lima-Lopes
[EMAIL
Hi,
I have to replace a regular expression in my thesis. But when i tried:
edit -- search/replace
I found out that I can't type any kind of accents, and this expression
has an aacute {á}. In terms of lyx codes (extracted form my doc's source
file) this expression should be something like:
Hi,
I have to replace a regular expression in my thesis. But when i tried:
edit -- search/replace
I found out that I can't type any kind of accents, and this expression
has an aacute {á}. In terms of lyx codes (extracted form my doc's source
file) this expression should be something like:
Hi,
I have to replace a regular expression in my thesis. But when i tried:
edit --> search/replace
I found out that I can't type any kind of accents, and this expression
has an aacute {á}. In terms of lyx codes (extracted form my doc's source
file) this expression should be something like:
in red
\appendix
[]s
lima-lopes
R.E. de Lima-Lopes
[EMAIL PROTECTED]
GNU/Linux Registered User # 182240
On Wed, 9 May 2001, Remzi Seker wrote:
Date: Wed, 9 May 2001 13:19:32 -0500
From: Remzi Seker [EMAIL PROTECTED]
To: LyX [EMAIL PROTECTED]
Subject: appendix
How
in red
\appendix
[]s
lima-lopes
R.E. de Lima-Lopes
[EMAIL PROTECTED]
GNU/Linux Registered User # 182240
On Wed, 9 May 2001, Remzi Seker wrote:
Date: Wed, 9 May 2001 13:19:32 -0500
From: Remzi Seker [EMAIL PROTECTED]
To: LyX [EMAIL PROTECTED]
Subject: appendix
How
in red
\appendix
[]s
lima-lopes
R.E. de Lima-Lopes
[EMAIL PROTECTED]
GNU/Linux Registered User # 182240
On Wed, 9 May 2001, Remzi Seker wrote:
> Date: Wed, 9 May 2001 13:19:32 -0500
> From: Remzi Seker <[EMAIL PROTECTED]>
> To: LyX <[EMAIL PROTECTED]>
> Subject: appendix
you may try to export your text as a html file. it can be read by some
versions of m$ Word, like 97 or 2000.
there are may programmes for that, some work as a Lyx plu-in
cheers
[]s
lima-lopes
R.E. de Lima-Lopes
[EMAIL PROTECTED]
GNU/Linux Registered User # 182240
On Sun,
you may try to export your text as a html file. it can be read by some
versions of m$ Word, like 97 or 2000.
there are may programmes for that, some work as a Lyx plu-in
cheers
[]s
lima-lopes
R.E. de Lima-Lopes
[EMAIL PROTECTED]
GNU/Linux Registered User # 182240
On Sun,
you may try to export your text as a html file. it can be read by some
versions of m$ Word, like 97 or 2000.
there are may programmes for that, some work as a Lyx plu-in
cheers
[]s
lima-lopes
R.E. de Lima-Lopes
[EMAIL PROTECTED]
GNU/Linux Registered User # 182240
On Sun,
you might try apa.bst
[]s
lima-lopes
R.E. de Lima-Lopes
[EMAIL PROTECTED]
GNU/Linux Registered User # 182240
On Mon, 9 Apr 2001, Birch P. Browning wrote:
Date: Mon, 09 Apr 2001 21:33:39 -0400
From: Birch P. Browning [EMAIL PROTECTED]
To: lyx-users [EMAIL PROTECTED]
you might try apa.bst
[]s
lima-lopes
R.E. de Lima-Lopes
[EMAIL PROTECTED]
GNU/Linux Registered User # 182240
On Mon, 9 Apr 2001, Birch P. Browning wrote:
Date: Mon, 09 Apr 2001 21:33:39 -0400
From: Birch P. Browning [EMAIL PROTECTED]
To: lyx-users [EMAIL PROTECTED]
you might try apa.bst
[]s
lima-lopes
R.E. de Lima-Lopes
[EMAIL PROTECTED]
GNU/Linux Registered User # 182240
On Mon, 9 Apr 2001, Birch P. Browning wrote:
> Date: Mon, 09 Apr 2001 21:33:39 -0400
> From: Birch P. Browning <[EMAIL PROTECTED]>
> To: lyx-users <[EMAIL
i use it quite frequently and it works great, but I have some remarks to
do:
- It has some problems to inport VERY complex tables, but in ordinary ones
it runs fine;
- It fails to import texts with 1,5 line spacing (at least my version),
but it is no big deal;
- The images it translates are
i use it quite frequently and it works great, but I have some remarks to
do:
- It has some problems to inport VERY complex tables, but in ordinary ones
it runs fine;
- It fails to import texts with 1,5 line spacing (at least my version),
but it is no big deal;
- The images it translates are
i use it quite frequently and it works great, but I have some remarks to
do:
- It has some problems to inport VERY complex tables, but in ordinary ones
it runs fine;
- It fails to import texts with 1,5 line spacing (at least my version),
but it is no big deal;
- The images it translates are
Hi
I'm writing a research report with lots of pictures and any time I user lyx
cross-reference device I cannot get the proper number under my references.
For exmple, in the chapter 3 four pictures are present
3.1 blah blah blah Label: fig 1
3.2 blah blah blah Label: fig 2
3.3 blah
Hi
I'm writing a research report with lots of pictures and any time I user lyx
cross-reference device I cannot get the proper number under my references.
For exmple, in the chapter 3 four pictures are present
3.1 blah blah blah Label: fig 1
3.2 blah blah blah Label: fig 2
3.3 blah
Hi
I'm writing a research report with lots of pictures and any time I user lyx
cross-reference device I cannot get the proper number under my references.
For exmple, in the chapter 3 four pictures are present
3.1 blah blah blah Label: fig 1
3.2 blah blah blah Label: fig 2
3.3 blah
Hi
something very odd happens to my floats numbering. it just skips nay table
with should be numbered two, I mean in the list of tables it reads
1.1-- blah blah
1.3 -- blah blah
2.1 -- blah blah
2.3 -- blah blah
what maight have caused it?
I'm using version 1.1.3 under red hat linux
thank
Hi
something very odd happens to my floats numbering. it just skips nay table
with should be numbered two, I mean in the list of tables it reads
1.1-- blah blah
1.3 -- blah blah
2.1 -- blah blah
2.3 -- blah blah
what maight have caused it?
I'm using version 1.1.3 under red hat linux
thank
Hi
something very odd happens to my floats numbering. it just skips nay table
with should be numbered two, I mean in the list of tables it reads
1.1-- blah blah
1.3 -- blah blah
2.1 -- blah blah
2.3 -- blah blah
what maight have caused it?
I'm using version 1.1.3 under red hat linux
thank
Hi
I had serious problems to comiple barracuda as well and I just gave up.
A good alternative (the one I use over here) is a programme called tkbib.
Its rather simpler than barracuda, but it does its job well.
You may get it at http://vlsicad.cs.binghamton.edu/~pmadden/tkbib/
regards
[]s
Hi
I had serious problems to comiple barracuda as well and I just gave up.
A good alternative (the one I use over here) is a programme called tkbib.
Its rather simpler than barracuda, but it does its job well.
You may get it at http://vlsicad.cs.binghamton.edu/~pmadden/tkbib/
regards
[]s
Hi
I had serious problems to comiple barracuda as well and I just gave up.
A good alternative (the one I use over here) is a programme called tkbib.
Its rather simpler than barracuda, but it does its job well.
You may get it at http://vlsicad.cs.binghamton.edu/~pmadden/tkbib/
regards
[]s
you may try
\clearpage
Just before your bibliography. I works here
[]s
rlopes
---
R. E. de Lima-Lopes
[EMAIL PROTECTED]
Sao Paulo -SP
Brasil
---Reply to mail
from louis ([EMAIL PROTECTED])
on Mon, 21 Feb 2000 17:55:58 +0200
about Biblio in Contents
Hi
I have a problem
you may try
\clearpage
Just before your bibliography. I works here
[]s
rlopes
---
R. E. de Lima-Lopes
[EMAIL PROTECTED]
Sao Paulo -SP
Brasil
---Reply to mail
from louis ([EMAIL PROTECTED])
on Mon, 21 Feb 2000 17:55:58 +0200
about Biblio in Contents
Hi
I have a problem
you may try
\clearpage
Just before your bibliography. I works here
[]s
rlopes
---
R. E. de Lima-Lopes
[EMAIL PROTECTED]
Sao Paulo -SP
Brasil
---Reply to mail
from louis ([EMAIL PROTECTED])
on Mon, 21 Feb 2000 17:55:58 +0200
about Biblio in Contents
> Hi
>
> I have a
A possible solution is to use layout files from similar document classes.
e. g. If you are using a thesis.cls or sty class you might get book.layout
or report.layout and save it as thesis.layout.
[]s
rlopes
---
R. E. de Lima-Lopes
[EMAIL PROTECTED]
Sao Paulo -SP
Brasil
A possible solution is to use layout files from similar document classes.
e. g. If you are using a thesis.cls or sty class you might get book.layout
or report.layout and save it as thesis.layout.
[]s
rlopes
---
R. E. de Lima-Lopes
[EMAIL PROTECTED]
Sao Paulo -SP
Brasil
A possible solution is to use layout files from similar document classes.
e. g. If you are using a thesis.cls or sty class you might get book.layout
or report.layout and save it as thesis.layout.
[]s
rlopes
---
R. E. de Lima-Lopes
[EMAIL PROTECTED]
Sao Paulo -SP
Brasil
Hi friends
I,m writing a document which needs more than usual number of subsections.
In Lyx main window it allows you to have three levels, eg
1.1.1 section
Acutally I need to have in my document four labels, sometimes five, eg
1.1.1.1.section
1.1.1.1.1 section
Is there any command which
about subsections
Rodrigo Esteves de Lima-Lopes wrote:
Hi friends
I,m writing a document which needs more than usual number of subsections.
In Lyx main window it allows you to have three levels, eg
1.1.1 section
Acutally I need to have in my document four labels, sometimes five, eg
Hi friends
I,m writing a document which needs more than usual number of subsections.
In Lyx main window it allows you to have three levels, eg
1.1.1 section
Acutally I need to have in my document four labels, sometimes five, eg
1.1.1.1.section
1.1.1.1.1 section
Is there any command which
about subsections
Rodrigo Esteves de Lima-Lopes wrote:
Hi friends
I,m writing a document which needs more than usual number of subsections.
In Lyx main window it allows you to have three levels, eg
1.1.1 section
Acutally I need to have in my document four labels, sometimes five, eg
Hi friends
I,m writing a document which needs more than usual number of subsections.
In Lyx main window it allows you to have three levels, eg
1.1.1 section
Acutally I need to have in my document four labels, sometimes five, eg
1.1.1.1.section
1.1.1.1.1 section
Is there any command which
about subsections
> Rodrigo Esteves de Lima-Lopes wrote:
>>
>> Hi friends
>>
>> I,m writing a document which needs more than usual number of subsections.
>>
>> In Lyx main window it allows you to have three levels, eg
>>
>> 1.1.1 section
>&g
I think you have to edit your *.bst files and change the and for the
french equivalnet
[]s
rlopes.
--
R.E. de Lima-Lopes
[EMAIL PROTECTED]
I think you have to edit your *.bst files and change the and for the
french equivalnet
[]s
rlopes.
--
R.E. de Lima-Lopes
[EMAIL PROTECTED]
I think you have to edit your *.bst files and change the and for the
french equivalnet
[]s
rlopes.
--
R.E. de Lima-Lopes
[EMAIL PROTECTED]
Hi...
you have to use a couple of latex commands to do it.
just type \pagenumbering{roman} where you want to begin a roman numbering
style and format as latex (format - tex).
after this type the following commands on the page you want your arabic
numbering to start and format as latex
Hi...
you have to use a couple of latex commands to do it.
just type \pagenumbering{roman} where you want to begin a roman numbering
style and format as latex (format - tex).
after this type the following commands on the page you want your arabic
numbering to start and format as latex
Hi folk
I think i might help
\clearpage
\addcontensline{toc}{chapter}{your_reference_chapter}
[]s
rlopes
--
R.E. de Lima-Lopes
[EMAIL PROTECTED]
---Reply to mail
from Abdelrazak YOUNEs ([EMAIL PROTECTED])
on Tue, 01 Feb 2000 18:08:04 +0100
about Putting out page
Hi...
you have to use a couple of latex commands to do it.
just type \pagenumbering{roman} where you want to begin a roman numbering
style and format as latex (format - tex).
after this type the following commands on the page you want your arabic
numbering to start and format as latex
Hi...
you have to use a couple of latex commands to do it.
just type \pagenumbering{roman} where you want to begin a roman numbering
style and format as latex (format - tex).
after this type the following commands on the page you want your arabic
numbering to start and format as latex
Hi folk
I think i might help
\clearpage
\addcontensline{toc}{chapter}{your_reference_chapter}
[]s
rlopes
--
R.E. de Lima-Lopes
[EMAIL PROTECTED]
---Reply to mail
from Abdelrazak YOUNEs ([EMAIL PROTECTED])
on Tue, 01 Feb 2000 18:08:04 +0100
about Putting out page
Hi...
you have to use a couple of latex commands to do it.
just type \pagenumbering{roman} where you want to begin a roman numbering
style and format as latex (format - tex).
after this type the following commands on the page you want your arabic
numbering to start and format as latex
Hi...
you have to use a couple of latex commands to do it.
just type \pagenumbering{roman} where you want to begin a roman numbering
style and format as latex (format - tex).
after this type the following commands on the page you want your arabic
numbering to start and format as latex
Hi folk
I think i might help
\clearpage
\addcontensline{toc}{chapter}{your_reference_chapter}
[]s
rlopes
--
R.E. de Lima-Lopes
[EMAIL PROTECTED]
---Reply to mail
from Abdelrazak YOUNEs ([EMAIL PROTECTED])
on Tue, 01 Feb 2000 18:08:04 +0100
about Putting out page
Hello Torsten
you might use apalike, which formats your citation like: (author, year)
It is just to use apalike style in your bibtex references and type \usepackage
{apalike} in your preamble.
It 's also possible to use AMS styles which format the citations by its initials
I hope it helps
Hello Torsten
you might use apalike, which formats your citation like: (author, year)
It is just to use apalike style in your bibtex references and type \usepackage
{apalike} in your preamble.
It 's also possible to use AMS styles which format the citations by its initials
I hope it helps
Hello Torsten
you might use apalike, which formats your citation like: (author, year)
It is just to use apalike style in your bibtex references and type \usepackage
{apalike} in your preamble.
It 's also possible to use AMS styles which format the citations by its initials
I hope it helps
Hi folks...
here are some doubts on the use of lyx, I wonder if you know how to help me:
1. I'm using apalike references style which formats each entry like (key,
year), but in some cases, not all, I need an entry such as (year). Is there any
way of doing this and keep using apalike styles?
2
Hi folks...
here are some doubts on the use of lyx, I wonder if you know how to help me:
1. I'm using apalike references style which formats each entry like (key,
year), but in some cases, not all, I need an entry such as (year). Is there any
way of doing this and keep using apalike styles?
2
Hi folks...
here are some doubts on the use of lyx, I wonder if you know how to help me:
1. I'm using apalike references style which formats each entry like (key,
year), but in some cases, not all, I need an entry such as (year). Is there any
way of doing this and keep using apalike styles?
2
Hi folks
I am using tth package to convert my tex files (produced under lyx) to html,
but there are some problems:
-- the name of the chapters etc appear in English, I need them in Portugeuse in
the htm files as well
-- It doesn't print any table of contents.
Is there any ay to enable such
Hi folks
I am using tth package to convert my tex files (produced under lyx) to html,
but there are some problems:
-- the name of the chapters etc appear in English, I need them in Portugeuse in
the htm files as well
-- It doesn't print any table of contents.
Is there any ay to enable such
Hi folks
I am using tth package to convert my tex files (produced under lyx) to html,
but there are some problems:
-- the name of the chapters etc appear in English, I need them in Portugeuse in
the htm files as well
-- It doesn't print any table of contents.
Is there any ay to enable such
Hi folks
I need to have the references of my thesis present in the table of contents. Is
there any way to do this?
Thank you!!
[]s
rlopes
Hi folks
I need to have the references of my thesis present in the table of contents. Is
there any way to do this?
Thank you!!
[]s
rlopes
Hi folks
I need to have the references of my thesis present in the table of contents. Is
there any way to do this?
Thank you!!
[]s
rlopes
you could export as a *ps and then use ps2pdf, here it works very well.
[]s
rlopes
At 09:02 01/12/1999 +0200, Jacques Germishuizen wrote:
Hello
Is there software available for converting Lyx 2 PDF?
Regards
Jacques Germishuizen
E-pos: [EMAIL PROTECTED]
you could export as a *ps and then use ps2pdf, here it works very well.
[]s
rlopes
At 09:02 01/12/1999 +0200, Jacques Germishuizen wrote:
Hello
Is there software available for converting Lyx 2 PDF?
Regards
Jacques Germishuizen
E-pos: [EMAIL PROTECTED]
you could export as a *ps and then use ps2pdf, here it works very well.
[]s
rlopes
At 09:02 01/12/1999 +0200, Jacques Germishuizen wrote:
>Hello
>
>Is there software available for converting Lyx 2 PDF?
>
>Regards
>
>Jacques Germishuizen
>E-pos: [EMAIL PROTECTED]
>
>
>
>
hi
I need to include some graphics on my thesis which I generate by using an
ordinary spreadsheet and printing as non-encapsulated postscript files.
After this, I try to convert them to encapsulated but the follow problems show
up:
- the GIMP software makes my graphics quite blur, almost
hi
I need to include some graphics on my thesis which I generate by using an
ordinary spreadsheet and printing as non-encapsulated postscript files.
After this, I try to convert them to encapsulated but the follow problems show
up:
- the GIMP software makes my graphics quite blur, almost
hi
I need to include some graphics on my thesis which I generate by using an
ordinary spreadsheet and printing as non-encapsulated postscript files.
After this, I try to convert them to encapsulated but the follow problems show
up:
- the GIMP software makes my graphics quite blur, almost
Hi folks...
Does anybody know a package which prints messages such as "continued next page"
in tables longer than a page?
Where do I get it?
thank you.
[]s
rlopes
Hi folks...
Does anybody know a package which prints messages such as "continued next page"
in tables longer than a page?
Where do I get it?
thank you.
[]s
rlopes
Hi folks...
Does anybody know a package which prints messages such as "continued next page"
in tables longer than a page?
Where do I get it?
thank you.
[]s
rlopes
I had a problem like you myself
I don't know with sort of requierments you have to follow, but some styles are
available on
http://www.tex.ac.uk/tex-archive/help/Catalogue/catalogue.html
You may install one in your latex system and use a copy of the report.layout,
renamed to the actual style.
I had a problem like you myself
I don't know with sort of requierments you have to follow, but some styles are
available on
http://www.tex.ac.uk/tex-archive/help/Catalogue/catalogue.html
You may install one in your latex system and use a copy of the report.layout,
renamed to the actual style.
I had a problem like you myself
I don't know with sort of requierments you have to follow, but some styles are
available on
http://www.tex.ac.uk/tex-archive/help/Catalogue/catalogue.html
You may install one in your latex system and use a copy of the report.layout,
renamed to the actual style.
Hi folks,
I need to write some tables which are 2 or three pages long. However when
I activate my longtable support my tables' floats are placed by the beging
of the second page, by the pages' break, not at the begining of the table
(on the first page) as they should be.
I need them to be
Hi folks,
I need to write some tables which are 2 or three pages long. However when
I activate my longtable support my tables' floats are placed by the beging
of the second page, by the pages' break, not at the begining of the table
(on the first page) as they should be.
I need them to be
Hi folks,
I need to write some tables which are 2 or three pages long. However when
I activate my longtable support my tables' floats are placed by the beging
of the second page, by the pages' break, not at the begining of the table
(on the first page) as they should be.
I need them to be
Hi everybody
I'm running Lyx.1.0.1 within a tetex-latex 0.9.2..
I'd like to know how to install some latex packages such as easy talbe, long
table etc and, after this, make them work at lyx.
Thank you very much
[]s
rlopes
1 - 100 of 114 matches
Mail list logo
