The m100 can receive files via the cassette port from almost any audio source.
The trick is to use a an audio transformer. Something like an 8 ohm to 1.2k
ohm. The 8 ohm end connects to the output of the audio device. The 1.2k ohm end
connects to the ear end of the m100 cassette cable. I have
But the RX function works?
...
On 8/2/17, Kurt McCullum wrote:
> Testing thus far reveals that pin 25 of the UART doesn't fluctuate at all.
> It sits a 6.7 volts even when I'm not sending data. I wrote a BASIC program
> that sends a character, waits a half a second then
I run a gopher server at gopher://ratthing.com. It can be reached via
http proxy at http://ratthing.com:7780.
I'm always glad to help out with setting up or hosting services.
RL
On 8/2/17 8:03 AM, John Gardner wrote:
> Something for you guys interested in getting on-line to think about...
>
>
Testing thus far reveals that pin 25 of the UART doesn't fluctuate at all. It
sits a 6.7 volts even when I'm not sending data. I wrote a BASIC program that
sends a character, waits a half a second then sends another.
I'll do more testing but my first impression is that it's the UART.
Kurt
Well, what a coïncidence!
I just read about
Gopher:https://motherboard.vice.com/en_us/article/9kwek8/long-live-gopher-the-techies-keeping-the-text-driven-internet-alive
Would suit our machines perfectly. Greetings from the TyRannoSaurus
Jan-80
From: Ken Pettit
To:
Is there somewhere a description of how the DVI interface works, and what
signals (type & speed) come out (and where) of the Model T ?
Did you need to load any software on the T to make it work, or was a simple
screen 1,0 enough ?
Is there a general description of the workings of a DVI,
Correct; the HC is definitely a better replacement for the 40H, but I'm pretty
sure that in a pinch the HCT would also work.
m
- Original Message -
From: "Francesco Messineo"
To:
Sent: Wednesday, August 02, 2017 1:05 PM
Subject: Re:
Other tricks that might be helpful:
- for another alternating bits sequence, repeatedly send capital letter
"U" (a different sequence of alternating ones and zeros).
- for a long pulse, set the baud rate to the slowest speed that the serial
port supports and then send 0x00 or send 0xFF
On Wed,
On Wed, Aug 2, 2017 at 6:47 PM, Mike Stein wrote:
> Good advice; the most likely culprit (because it's indirectly connected to
> the outside world with its static, lightning, ground loops etc.) is M35, a
> (1)4584.
>
> The only other IC would be M24, a 40H032 (which could
Even easier, in BASIC open the com port & set up a loop
which sends 0xAA each time through the loop
On 8/2/17, Kurt McCullum wrote:
> Thanks John,
>
> That sounds doable for me. At least I'll be able to find the culprit. At 300
> baud I should be able to pick up a
Thanks John,
That sounds doable for me. At least I'll be able to find the culprit. At 300
baud I should be able to pick up a signal.
Kurt
-Original Message-
From: M100 [mailto:m100-boun...@lists.bitchin100.com] On Behalf Of John Gardner
Sent: Wednesday, August 02, 2017 9:24 AM
To:
Well the good news is the problem is somewhere between the db25 and the
UART :-)
-- John.
Mike, that reminds me of an old joke.
Q: How many programmers does it take to change a light bulb?
A: None. It’s a hardware problem.
All kidding aside. Yes it’s probably an IC somewhere. I’ve done my fair share
of board work over the years but tracing this down and repairing it is likely
Hey John,
For a WiFi enabled Model T using a Woolly board, Gopher is the main
protocol I was thinking about. Trying to support HTML / Flash /
Javascript, etc. on a machine this old with a 40x8 LCD would be a bit
futile I think. If (or should I say when) Woolly becomes a reality, it
would
Something for you guys interested in getting on-line to think about...
https://motherboard.vice.com/en_us/article/9kwek8/long-live-gopher-the-techies-keeping-the-text-driven-internet-alive
Probably a relatively simple 50 cent IC replacement...
- Original Message -
From: Kurt McCullum
To: m...@bitchin100.com
Sent: Wednesday, August 02, 2017 10:37 AM
Subject: Re: [M100] Model 100 serial port
Well it’s officially a dead serial port. When connected to a PC I can
Well it’s officially a dead serial port. When connected to a PC I can receive
but not send data. I then took a loopback cable and put it on the M100. Nothing!
Not sure if I can fix it or if I should part it out but for now I’ll set it
aside for another day.
Kurt
From: M100
Thanks John,
Yeah the chunky cable thing is an issue but I’ve got a 25 to 9 pin slim adapter
for that. I can receive data but not send. I’m breaking out some testing cables
that I used a couple years back to see if I can get it working. If there isn’t
a difference then I have a bum serial
On Tue, Aug 1, 2017 at 10:03 PM Kurt McCullum wrote:
> Are there any unique requirements for the M100 when it comes to the serial
> port. I just plugged in the M100 to the cable I have used for my
> 102/200/8201 and it flat out doesn’t work. I’m baffled right now. Can
>
19 matches
Mail list logo