What exact flash part number do you have?
On Thu, Oct 19, 2017 at 1:22 PM, Brian Brindle wrote:
> I have one put together that programmed up OK but am having issues getting
> the REX software on it. It erases all the blocks just fine but hangs when
> re-loading to block 0.
http://www.ebay.ca/itm/282700577494?ul_noapp=true
OK great!
I find the T200 memory management leaves a lot to be desired. Even simple
things like deleting a Basic program or Text file can leave the memory
still occupied with nothing showing on the screen. Although I do like the
screen real estate and keyboard on the T200 :)
On 19/10/17, 11:58
Wow! The ctrl-break thing now shows 19590 bytes free! Something must
have been hogging the RAM but no idea what. Oh well.
Thanks for your help.
On 19/10/17 01:07, Fugu ME100 wrote:
> A T200 with a clean memory should show around 19K per bank, if they are
> fully populated. Part of the 24K is
When I built an original REX I had a similar problem turned out there was a bad
solder joint on the CPLD. The soldering looked fine from a visual inspection
but when I used my dental pick to check each joint one of the pins moved.
Fixed the bad joint and the board worked fine. Might be
check your solder joints. if you try to program to a block that is already
programmed... the flash never recovers.
On Thu, Oct 19, 2017 at 1:22 PM, Brian Brindle wrote:
> I have one put together that programmed up OK but am having issues getting
> the REX software on it. It
I have one put together that programmed up OK but am having issues getting
the REX software on it. It erases all the blocks just fine but hangs when
re-loading to block 0. Probably something up with the flash..
I'll report back when I have more info.
Brian
On Thu, Oct 19, 2017 at 7:25 AM,
I have parts on order to try again. Will be >= week.
On Thu, Oct 19, 2017 at 12:11 PM, Brian White wrote:
> I ordered a set only a couple days ago, so it'll be a week or so for me.
>
> On Oct 19, 2017 7:25 AM, "Stephen Adolph" wrote:
>
> Has anyone made
I ordered a set only a couple days ago, so it'll be a week or so for me.
On Oct 19, 2017 7:25 AM, "Stephen Adolph" wrote:
Has anyone made a REX successfully with that modified PCB yet?
I would like to know if that artwork is good or bad.
..Steve
Has anyone made a REX successfully with that modified PCB yet?
I would like to know if that artwork is good or bad.
..Steve
I think a larger pad would do it.
On Oct 19, 2017 12:35 AM, "Brian White" wrote:
> That's exactly why I want to come up with a little saner way to pull up
> PORT_EN. It's way too easy to just touch the wrong side of that resistor,
> or something else in the area. It's
11 matches
Mail list logo