Suggestion - Remove all power, connect a 1K resistor across
the NiCd. Let it percolate overnight & remove the resistor, plug
it back in.
On 12/3/18, Mauro Pintus wrote:
> Unfortunately the unit is not working and yes I tried the cold start
> (CTRL+PAUSE then Reset) without luck.
>
> Thanks
>
Unfortunately the unit is not working and yes I tried the cold start
(CTRL+PAUSE then Reset) without luck.
Thanks
Mauro
Sent from my iPad
On 04/dic/2018, at 00:02, "John R. Hogerhuis" wrote:
> So is it working now? Did you do a cold start?
>
> On Mon, Dec 3, 2018, 2:57 PM Mauro Pintus >
So is it working now? Did you do a cold start?
On Mon, Dec 3, 2018, 2:57 PM Mauro Pintus Hi Mike,
> I tried to replace the NiCd battery leaving the unit without battery
> for few days and when I applied the new one I left it on charge without
> turning on the unit for couple of days.
> I thin
Hi Mike,
I tried to replace the NiCd battery leaving the unit without battery for
few days and when I applied the new one I left it on charge without turning on
the unit for couple of days.
I think this should have cleared the garbage in the RAM :)
I also replaced most of the electrolitic ca
Might just need a short rest and a cold boot; turning off the memory switch
might well have scrambled the RAM contents.
- Original Message -
From: Mauro Pintus
To: m...@bitchin100.com
Sent: Monday, December 03, 2018 5:00 PM
Subject: Re: [M100] Olivetti M-10's for a new home
Hi Jan,
i actually don't know for sure which component is preventing it to complete
the boot.
It was warking fine while accidentally I flipped off the NiCd battery switch.
Now if I turn it on nothing appear on the display, I can just regulate the
contrast...
I tried to blindly write a basic
Mauro,
What do you need to repair your M-10? Greetings from the TyRannoSaurus
Jan-80
From: Mauro Pintus
To: m...@bitchin100.com
Sent: Saturday, 1 December 2018, 16:12
Subject: Re: [M100] Olivetti M-10's for a new home
Thank you Jeff, really appreciated. Now I keep my finger crossed