https://ftp.whtech.com/club100/doc/p100-9002.pdf
Article on adding a serial mouse to Model 100 in February 1990 Portable 100.
Comet
On Sunday, January 10, 2021, 03:06:26 PM PST, Hiraghm
wrote:
I have two Gravis Stinger joypads, (which are still available new on Amazon
I suppose they were annoyed by default behavior of sound during modem
use or cassette use; you know, those sounds that from hearing everyday
you hardly notice anymore.
On 10/9/2019 10:29 AM, Peter Vollan wrote:
Why would anyone do that?
On Mon, 9 Sep 2019 at 16:49, Comet wrote:
Shockingly
But if I hooked the modem directly to the serial port on the VT100, then
my Model 100 would not be able to perform macros and automation in the
MUD.?? :-D?? I have the Model 100 involved, so I can run AI.
On 9/9/2019 9:13 PM, Ian Eure wrote:
I guess you???re using the modem built in to the M100
It is just me being quiet; I have 19,676 unread messages from the list
With respect to MUDs, I have used my Model 100 to play.?? Usually I use
the keyboard and modem, and put incoming stream out to my parallel port,
which has a parallel-to-serial interface going to my VT100 terminal, so
I
Hi Josh, I have some interest in reviewing your document.?? If it is
about Tandy Assembly, be sure to cover the instruction set undocumented
opcodes.?? :-)?? [One does need to bank-switch in order to use the extra
interrupt, but it is handy!]
On 8/9/2019 1:17 PM, Josh Malone wrote:
All,
Star
Shockingly, some units have had their beeper wires disconnected
purposefully by former owners.?? Since sound is one of the primary uses
for my own Model 100, this is significant!
On 8/9/2019 4:01 PM, Josh Malone wrote:
On Sun, Sep 8, 2019 at 4:32 PM John R. Hogerhuis wrote:
Your focus is co
Hello Jeroen,
We haven't heard from you lately.?? The model 100 bus and option ROM port
are useful, as are the bar code reader port, etc.
I highly recommend that you ensure that your sound emulation is good --
music/sound processing is one of the "killer apps" for me.?? :-)
On 6/2/2018 4:04 A
The TRS-80 Model 100 Portable Computer Quick Reference Guide contains
the information:
ftp://ftp.whtech.com/club100/doc/m100qr.pdf
Shift/Up: Moves the Cursor to the top of the screen above the current
position.
Shift/Down: Moves the Cursor to the bottom of the screen below the
current posit
Hi George,
It is easy to make custom characters, as I mentioned in
http://m100.bitchin100.narkive.com/4RszT9aa/custom-characters-for-m10014
years ago; it is good to search the archives, as much knowledge it to be
gained, thereby. It seems that people may have forgotten some of these
old ways
.
Managed to get the control characters to display (the Unicode
control character glyphs start at 0x2400)
On 15 November 2015 at 10:51, Mark Wickens
mailto:m...@wickensonline.co.uk>> wrote:
Many thanks for all the input.
Ron: I've corrected the copy-past
On 4/2/2017 12:56 PM, Willard Goosey wrote:
What I'm seeing is that it returns Z set if break was pressed. Can
someone confirm this for me?
(*)HHOK
Willard
It's generally a good idea to search the mail archives for answers to
questions like yours.
(Lately I've been reading the list ONLY t
creen refresh is not all bad
if you are starting from a blank screen, as it will go faster than you can
read. :-D ----
Comet
From: Jim Williams
To: "m100@lists.bitchin100.com"
Sent: Sunday, October 30, 2016 12:24 PM
Subject: [M100] Doing what the C= can do?
I came acros
e corrected the copy-paste error.
Comet: I have incorporated many of your suggestions and I agree with your
philosophy.
The revised and permanent home for the table is now:
http://wickensonline.co.uk/static/files/tandy/Unicode/TandyModelTCodetoUnicodeConversionTable.html
I have embedded
g
characters means 'EM QUAD' (U+2001) space to me.
190 BE looks, even for the Model 100, like it means ¨ DIAERESIS
Comet
From: Ron Wiesen
To: 'Model 100 Discussion'
Sent: Friday, November 13, 2015 5:02 AM
Subject: Re: [M100] Fwd: Re: Conversion of
Hi Joe,
I use a parallel-to-serial converter to drive my VT100 (in VT52 emulation) as
my external display.
I just bought a USB to DB9 serial adaptor cable to connect my Windows 10
desktop to my Model 100, so it will be easy for me to display output using my
PC monitor instead.
Note that us
Hi Ron, you wrote on Friday, August 14, 2015 4:20 AM:
The system ROM of the Model 100 laptop has one error within its logarithm
table. Rather than "some early model 100s" being afflicted, my
understanding is that the erroneous logarithm table is present in the system
ROM of all Model 100 lapto
.
---
From: Gerson W. Barbosa
Sent: Tuesday, October 19, 2010 1:32 PM
To: m...@list.30below.com
Subject: Re: Model 100 ATN Problem - Software fix (Was: Re:Jake's blog)
Hello Comet,
At first glance, there doesn't appear to be anything wrong in the constants
rela
17 matches
Mail list logo