Is that connector for the battery light ?I also have numerous donor boards
just need to be sure what I'm looking for.
Joe
-Original Message-
From: M100 On Behalf Of Hiraghm
Sent: Saturday, January 20, 2024 5:39 PM
To: m100@lists.bitchin100.com
Subject: [M100] Halp! Cut wire
The service manual lists it as PN YJF02S041Z but no hits for this.
Kyocera makes connectors, so I assume that was the manufacturer of that
connector. But I am not seeing anything that matches. Somebody is still
making the connector because I see it all the time inside of products
like
It's a "JST" type connector, but I don't know which variant. Are you in the
US? I'm sure I have a parts board that I could desolder that cable from and
send to you.
-Josh
On Sat, Jan 20, 2024 at 6:40 PM Hiraghm wrote:
> Awhile back I'd taken on the task of recapping my two M100s. On one it
>
Awhile back I'd taken on the task of recapping my two M100s. On one it
worked great; on the other, it was "dead" afterwards.
I suspected either a cap I didn't get properly soldered, or just flux I
didn't clean off the board sufficiently.
So today I opened it up again to take the motherboard