Well i have succefully play with some synchronized motion with a simulated
spindle-at-speed with hand turning motor ang using G33 G33.1 G76 i think
all work as expected (with G18).
But G73 G81 G82 G83 work only with G17 on a lathe ??
Br
--
website: http://www.machinekit.io blog: http://blog.
Hi all
Regarding to this motorised tailstock i have do some test and i have see
something strange.
Because i have a W axis (motorised tailstock) and i haven't any Drill
position on this ATC i like to use W axis with synchronised motion.
-G33 W-15.5 K1 work like a charm but need to be in G18 ???
for the first message about gpio forget that i have only do something for
check if the pin input for encoder index work correctly.
from linuxcnc forum i have found this test for check index:
and seems to work fine according to the topic and your information (set
true, trigger, check state = fal
I don't know what you mean by "set the index pin as general gpio" if the
hpg encoder hardware pins are setup as they should be you shouldn't have a
problem.
index-enable doesn't reset counts, if "arms" the index-pin itself to reset
the counts and the index-enable pin on the next index pulse.
S
I have setup the pru index pin as a general gpio input and test from halcmd
show pin = work fine.
But i never see some reset for count vs rawcount when this pin is set for
pru index else never see some changing status False/True.
setp hpg.encoder.00.chan.00.A-pin 0 # 931
setp hpg.encod
Hi,
Jan 3, 2020, 11:56 by mib.holotro...@gmail.com:
> The current relation between feeling of accomplishment and feedback.
>
You just need to learn praise yourself for work accomplished. Nobody else will
do it for you. Just tap yourself on the back and say Well Done. Depending on
others is the
