Search for this. Config error for Probotix cape. 'PRU control files not
found in /sys/class/uio/uio0' .
On Tuesday, September 4, 2018 at 3:02:19 PM UTC-7, mugginsac wrote:
>
> I am working on a CRAMPS config for Stretch. It is blowing out with the
> error msg
> PRU control files not found in /s
Would like to make some changes to the Axis gui, but can't locate the files
on the BBB. Can anyone tell me where the files are located and how to
access them?
Harley
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github:
https://github.com/machinekit
---
You received thi
Thank you for the prompt insight/suggestions ..
On Tuesday, September 5, 2017 at 1:51:21 PM UTC-7, Harley Engholm wrote:
>
> Is there a gui for a 3 axis cnc setup that uses less memory than Axis? And
> if so, will this affect response and accuracy?
> Harley
>
--
website: http://www.machinekit.i
I am running Axis on a diy cnc machine and I really don't see any problems
but the cpu indicator seems to indicate that it is using max available. As
I understand the use of the pru's the gcode execution should run
independent of the gui and the gui is only updated when timing allows it.
If th
Is there a gui for a 3 axis cnc setup that uses less memory than Axis? And
if so, will this affect response and accuracy?
Harley
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github:
https://github.com/machinekit
---
You received this message because you are subscribed t
direction of the motion is changing.
>
> Frederic
> http://cnc.f1oat.org
> On 2017-08-18 01:14, 'Harley Engholm' via Machinekit wrote:
>
> Have worked with the backlash parameter and have observed no differences
> in the engravings. Thanks for the info and I will k
Have worked with the backlash parameter and have observed no differences in
the engravings. Thanks for the info and I will keep playing with the
machine to see if there is
a solution.
On Tuesday, August 15, 2017 at 5:38:04 PM UTC-7, Harley Engholm wrote:
>
> I am using Vectric Cut2d for my desig
Thanks, I will do a little work the backlash adjust. I have never used it
on my main machine, a Probotix Asteroid, but this is on a small engraver I
built and so there may be some issues with backlash etc. I did install anti
backlash nuts on the x an y axis but I may try to go with single start
I am using Vectric Cut2d for my designs and have been using EMC2 post
processors for the g code creation. Everything works except that the
text on engravings are somewhat distorted, ie a straight line on the bottom
of an "L" is curved. Also circles are not complete, there is a very small
openin
Machinekit was working fine on my bbb with the image I originally burned on
an sd card. I then updated the image to the latest ---
bone-debian-8.7-machinekit-armhf-2017-02-05-4gb.img--and now I get
the error message in debug-PRU control files not found in
/sys/class/uio/uio0 on the first startup
I just noticed a previous post asking $15 per board. Is that still the
price and if so I would like to buy one.
On Thursday, January 12, 2017 at 8:08:18 PM UTC-8, Ralph Stirling wrote:
>
> It was such a simple design that I didn't bother with a BOM.
> I started with the Probotix config files, but
I will check out the config files. Are you running the BBB on a Comet? How
much are you asking for the boards?
Harley
On Thursday, January 12, 2017 at 8:08:18 PM UTC-8, Ralph Stirling wrote:
>
> It was such a simple design that I didn't bother with a BOM.
> I started with the Probotix config file
Do you have a BOM for the board and will the configuration files for
Comet_NP for the PBC BB work and how much for the PCB? Looks like a good,
simple setup.
Harley
On Thursday, January 12, 2017 at 10:43:44 AM UTC-8, Ralph Stirling wrote:
>
> I made one mistake on the (hasty) board layout I did,
Have the boards you had made worked well for a probotix type setup? I have
a V90 and an asteroid and am now working on a diy engraver that I want to
use the BBB on. Finding capes for CNC only instead of 3D printer setups has
been a challenge. I would be especially interested in your board since
14 matches
Mail list logo