Hi all,
Just FYI in case anybody wants to play with them:
http://marc.info/?l=linux-omapm=126119434601815w=2
They still do not work for booting the 2.6.28 based
Maemo kernel though.
Regards,
Tony
___
maemo-developers mailing list
* Brad Midgley [EMAIL PROTECTED] [071123 21:14]:
Sebastian
Is it any harder or easier to get the host mode cable sorted out with
the n810 and its new connector?
The N810 has micro-AB connector, so can use a standard micro-A cable.
Micro-A cables or converters do no still seem to be widely
Hi,
* Frantisek Dufka [EMAIL PROTECTED] [071013 00:48]:
Tony Lindgren wrote:
It needs a gadget loaded to be active because it runs in OTG mode.
For some reason g_file_storage is not loaded automatically, do things
work if you run /usr/sbin/osso-usb-mass-storage-enable.sh after booting?
If I
Hi all,
I did a quick update of the N800 host mode patches against
osso55 kernel release, and latest musb driver snapshot
from linux-omap tree.
The musb driver in linux-omap tree has had quite a few
changes since July, so the host mode should work much
better now. I've only done minimal testing
* Frantisek Dufka [EMAIL PROTECTED] [071012 13:07]:
Tony Lindgren wrote:
Anybody else here willing to provide the compiled kernels? Maybe throw
in also the MMC patches from http://intr.overt.org/blog/?p=63 :)
Just finished the crypto API enabled kernel
http://www.internettablettalk.com
* Larry Battraw [EMAIL PROTECTED] [071012 12:53]:
Hi Tony, before anyone else asks-- would you mind posting a compiled kernel
image so it's not necessary to for everyone to set up the cross-compiling
environment and apply the patches, etc.? It would be greatly appreciated-
Heh, well the thing
* Kees Jongenburger [EMAIL PROTECTED] [070605 12:14]:
On 5/9/07, Tony Lindgren [EMAIL PROTECTED] wrote:
Hi,
Here's what I did to convert a mini-A to mini-B cable: I chopped off the
top part of the mini-A end connector aluminum shielding using side cutter
pliers and a hand file so the mini
* Marcell Lengyel [EMAIL PROTECTED] [070525 02:08]:
Hi,
I get similar babble errors every now and then with a usb keyboard. Also,
unplugging and replugging the keyboard almost always result in babble error.
Interesting, I wonder if that happens only when low-speed devices like
keyboards are
Hi,
* Vasudevan Srinivasan [EMAIL PROTECTED] [070524 08:47]:
Hi,
The host side drivers were compiled in, CONFIG_USB_OTG_WHITELIST was set
off.
I could not get things up with the hub, so this time I cooked up a Y
connector
with external power source(a usb port from desktop without d+ and
Hi,
* Vasudevan Srinivasan [EMAIL PROTECTED] [070523 07:53]:
Hi,
I tried the usb host mode on n800 and was not success full in getting
devices hooked up.
These are the following that I have tried.
1. Compiled the kernel on SDK_ARMEL as per instructions at
* Marcell Lengyel [EMAIL PROTECTED] [070510 17:07]:
Just for the record: I got the host mode working with a usb keyboard
connected to the N800 through a powered usb hub. It was a different
keyboard, the first one that I have tried had a hub built into it and the
N800 did not like that for
Hi,
* Frantisek Dufka [EMAIL PROTECTED] [070509 00:05]:
Hello,
any tips how to make custom mini-B to female A cable so that N800
switches mode automatically? Which two wires I need to shortcut in the
cable? I can see the pinout here
http://pinouts.ru/Slots/USB_pinout.shtml but don't
* Marcell Lengyel [EMAIL PROTECTED] [070509 00:48]:
Frantisek Dufka wrote:
I tried the usb host mode on my N800, but I did not get it working. Here's
what I did:
- In scratchbox SDK_ARMEL I downloaded the
kernel-source-rx-34_2.6.18-osso40 sources,
- Applied the
* Klaus Rotter [EMAIL PROTECTED] [070508 05:55]:
Tony Lindgren wrote:
I've updated the patches for 2.6.18 below based on the linux-omap tree
snapshot. This udpate fixes a nasty bug with host mode TX fifo flushing,
so now all the Linux testusb testcases run reliably.
I am interessted
Hi,
* Tony Lindgren [EMAIL PROTECTED] [070418 14:06]:
Hi all,
I've been meaning to do this for a while, but only now got into it after
sorting out one more issue with the N800 USB DMA.
I've posted some experimental N800 host mode patches to [1] for people
to play with. Although the N800
Hi all,
I've been meaning to do this for a while, but only now got into it after
sorting out one more issue with the N800 USB DMA.
I've posted some experimental N800 host mode patches to [1] for people
to play with. Although the N800 is not built to support host or OTG mode
and does not have a
16 matches
Mail list logo