Our non-member Sender rules work fine with emails coming directly from the
sender, but our servers send emails to root@ and those are forwarded to
the mail list. The Sender filters do not seem to be working on this forwarded
email. How can we get around this?
Andrea
Andrea Laack
Research &
pau.bai...@csuc.cat writes:
> We have a problem with some Outlook users who on the list return
> this error:
This is an Outlook problem. With luck somebody here may have an
answer, but we are not Outlook experts. You should go to Outlook
channels for help.
Here's my best guess:
The error
We have a problem with some Outlook users who on the list return this error:
Error: 550 5.6.0 CAT.InvalidContent.Exception: ExchangeDataException, Decoding
of header Subject failed+ADs- raw value: +AFs-Ens+AF0-
Hi, all. I am trying to set up a Mailman list, and I've encountered a problem.
I'm new to this, and I could really use some help.
I want replies to go to the individual poster, but they're going to the list
instead. I have first_strip_reply_to set to No and reply_goes_to_list set to
Poster.
Hi:
I use postfix as an MTA and on the same mailman 2. When mail is sent to a list
that does not exist, the mail stays in the postfix queue in deferred state. Is
there any configuration at the mailman or postfix level for that those emails
that are passed to mailman to lists that do not exist
Hi:
First of all, thanks for this free software that works so well and
congratulations.
I use the 2.1.15 version in production server and all works well, but we have a
strange operation.
I send a message to a moderated list, the moderator receives a message to
moderate it, I receive a
Kala Balik writes:
>Dear Mailman-Users,
>
>I have a Mailman instance running on a vServer with Plesk, but am using
>email services from my provider (different IP and MX-Domain than the
>Mailman machine). Emails in the format n...@domain.tld generally seem
>to work.
Dear Mailman-Users,
I have a Mailman instance running on a vServer with Plesk, but am using
email services from my provider (different IP and MX-Domain than the
Mailman machine). Emails in the format n...@domain.tld generally seem
to work. However, when I send an email from the
Hello list.
For some reason none of hotmail or outlook users don't receive any of
our newsletter. Finally all of them auto unsubscribe.
The following is an error received form protection.outlook.com:
Remote Server returned '550 5.6.0 CAT.InvalidContent.Exception:
ExchangeDataException,
Hi,
I would like to unsubscribe that list but it seems that Your MX which
hosting mailman-us...@pythong.org is not Tor friendly.
Im getting confirmation from Your host, that my unsubscribe e-mail has
been rejected - because it looks like spam. Also I`m not able to do it
using website
Hello List Admins,
I am somehow at the end of my thinking capacity with this problem, yet I
think it's something minor that a third eye can help me with:
I have installed mailman-2.1.34 on a brand new box running FreeBSD-12.1.
The problem is that the web UI won't open. It instead prompts me
to
Hi,
I've mailing lists with some members using non ASCII characters in there
names, like "Franz Müller ".
Mailman 2.1.29 is installed. When I run "list_members -f mylist" I get
question marks in the output. My locale settings:
LANG=en_US.UTF-8
LANGUAGE=en_US:en
LC_CTYPE="en_US.UTF-8"
On 6/8/19 9:58 AM, ratatouille wrote:
> Hello!
>
> Mark Sapiro schrieb am 08.06.19 um 08:13:24 Uhr:
>
>> On 6/8/19 3:29 AM, ratatouille wrote:
>>>
>>> In /var/lib/mailman/data/aliases there is no alias like mailman-loop.
>>>
>>> What's wrong here and how do I fix this?
>>
>>
>> There should
Hello!
Mark Sapiro schrieb am 08.06.19 um 08:13:24 Uhr:
> On 6/8/19 3:29 AM, ratatouille wrote:
> >
> > In /var/lib/mailman/data/aliases there is no alias like mailman-loop.
> >
> > What's wrong here and how do I fix this?
>
>
> There should be. If Mailman is generating this file, it
On 6/8/19 3:29 AM, ratatouille wrote:
>
> In /var/lib/mailman/data/aliases there is no alias like mailman-loop.
>
> What's wrong here and how do I fix this?
There should be. If Mailman is generating this file, it should contain
# The ultimate loop stopper address
mailman-loop:
Hello!
Using mailman 2.1.17
Today I found this in the logfile:
Jun 1 05:16:16 bitmachine1 postfix/qmgr[4215]: 3070F181214:
from=, size=6027, nrcpt=1 (queue active)
Jun 1 05:16:16 bitmachine1 postfix/smtpd[3659]: proxy-accept: END-OF-MESSAGE:
250 2.0.0 from MTA(smtp:[127.0.0.1]:10025): 250
Hi David,
You'll have to dig deeper into cPanel documentation to find where the
problem is.
If you have shell access, then a simple exim -bt j...@nfbnet.org should
tell you whether the address is deliverable or not.
Exim+Mailman integration involves the MACROS, the routers and transports,
and
At 03:03 PM 1/15/2018, Mark Sapiro wrote:
On 01/15/2018 12:26 PM, David Andrews wrote: >
Some of my lists, and some of my users are
unable to send mail. The > users get a message
like this: > > Subject: Mail delivery failed:
returning message to sender > > This message was
created
On 01/15/2018 12:26 PM, David Andrews wrote:
> Some of my lists, and some of my users are unable to send mail. The
> users get a message like this:
>
> Subject: Mail delivery failed: returning message to sender
>
> This message was created automatically by mail delivery software.
>
> A message
Some of my lists, and some of my users are unable to send mail. The
users get a message like this:
Subject: Mail delivery failed: returning message to sender
This message was created automatically by mail delivery software.
A message that you sent could not be delivered to one or more of its
Hi,
For the past few days, I have been unable to get Ibiblio to respond to any
of the postings on your public Ibiblio forum. Is there some kind of
technical
problem and if so, when can I expect things to come back up?
Sherwin Dubren
Forum
Thanks! As usual You're the man!
Dave
p.s. I suppose I could edit and use for gmail too, and put them in a
cron job and run once a day to take care of new folks.
At 04:30 PM 2/14/2017, Mark Sapiro wrote:
On 02/14/2017 07:40 AM, David Andrews wrote:
>
> Well I will have to investigate
On 02/13/2017 07:45 PM, David Andrews wrote:
> Does anyone know if AOL has changed its DMARC policies recently. All of
> a sudden I am getting lots of AOL bounces, or maybe they have black
> listed us? nfbnet.org
Back to the original question.
I don't think AOL has changed anything with
On 02/14/2017 07:40 AM, David Andrews wrote:
>
> Well I will have to investigate further and see if that is the problem.
> You said "some time ago," and it is recent with me, which means it could
> be something else, or not.
True, but you should be able to tell from mail logs or Mailman's
At 08:57 AM 2/14/2017, Mark Sapiro wrote:
On 02/13/2017 09:33 PM, Jayson Smith wrote:
>
> One of my mailing lists has one AOL user who finally got tired of *his*
> messages to the list being rejected by AOL.
Some time ago, I noticed that when an AOL user posts to a list, the list
copy sent
On 02/13/2017 09:33 PM, Jayson Smith wrote:
>
> One of my mailing lists has one AOL user who finally got tired of *his*
> messages to the list being rejected by AOL.
Some time ago, I noticed that when an AOL user posts to a list, the list
copy sent back to that user, but not other AOL users,
Hi,
A while back, I was getting irregular AOL bounces. By that, I mean some
messages would go through just fine, and some would bounce with the
error "AOL will not accept delivery of this message." Very unhelpful, as
you can see. Furthermore, if a message bounced, it was probably always
Does anyone know if AOL has changed its DMARC policies recently. All
of a sudden I am getting lots of AOL bounces, or maybe they have
black listed us? nfbnet.org
--
Mailman-Users mailing list Mailman-Users@python.org
Mark Sapiro writes:
> Perhaps the sigs being stripped are another protocol, e.g.
> application/pkcs7-signature or ??
That was the first thing that occurred to me, although I was thinking
S-MIME.
--
Mailman-Users mailing list
On 11/21/15 7:59 AM, Mark Sapiro wrote:
> On 11/21/15 3:22 AM, Alain Williams wrote:
>> It seems to have recently gone to HTTPS and is generating a 404 for HTTP
>> URLs.
...
> There is a rewrite from http to https in the apache config for
> mail.python.org. It was working.
>
> The server was
On 11/21/15 3:39 AM, Alain Williams wrote:
> I am trying to allow signed messages on a mail list.
>
> I added multipart/signed & application/pgp-signature to pass_mime_types which
> stopped signed emails being rejected by mailman.
>
> My problem is that the signature attachment is being stripped
On 11/21/15 3:22 AM, Alain Williams wrote:
> It seems to have recently gone to HTTPS and is generating a 404 for HTTP URLs.
>
> This causes a problem with archives email that contains a link to old
> messages. Eg:
>
> https://mail.python.org/pipermail/mailman-users/2005-January/042243.html
It seems to have recently gone to HTTPS and is generating a 404 for HTTP URLs.
This causes a problem with archives email that contains a link to old messages.
Eg:
https://mail.python.org/pipermail/mailman-users/2005-January/042243.html
contains a link to:
I am trying to allow signed messages on a mail list.
I added multipart/signed & application/pgp-signature to pass_mime_types which
stopped signed emails being rejected by mailman.
My problem is that the signature attachment is being stripped from the message.
What should I be doing ?
Thanks in
On 7/21/15 12:42 AM, Laura Creighton wrote:
My new rule in my mailer for how to display html text is:
w3m -dump -o display_link_number=1 -cols 78 -T text/html -I $(echo %a | sed
-r 's/.*charset=?([-a-zA-Z0-9_]*).*/\1/') -O utf-8 | less
which is one heck of a mouthful, but hasn't caused
In a message of Mon, 20 Jul 2015 11:04:08 -0700, Mark Sapiro writes:
On 7/19/15 1:13 PM, Dominique Asselineau wrote:
Hello,
When a e-mail in text/html content-type is converted in to plain text,
the accented characters are not treated correctly.
There are potential issues with this. Mailman
Hello,
When a e-mail in text/html content-type is converted in to plain text,
the accented characters are not treated correctly.
in configuration file
/usr/lib/mailman/Mailman/Defaults.py
the variable
HTML_TO_PLAIN_TEXT_COMMAND = '/usr/bin/lynx -dump %(filename)s'
and this variable is
On 7/19/15 1:13 PM, Dominique Asselineau wrote:
Hello,
When a e-mail in text/html content-type is converted in to plain text,
the accented characters are not treated correctly.
There are potential issues with this. Mailman gets the content of the
text/html part and calls
On 05/11/2015 07:38 PM, Eric Lamer wrote:
Hi,
When I am sending mail to my mailman server I get this error:
Remote Server returned ' #5.3.0 x-unix; Group mismatch error. Mailman
expected the mail wrapper script to be executed as group mailman, but the
system's mail server executed
Hi,
When I am sending mail to my mailman server I get this error:
Remote Server returned ' #5.3.0 x-unix; Group mismatch error. Mailman expected
the mail wrapper script to be executed as group mailman, but the system's
mail server executed the mail script as group nobody. Try tweaking the
On 05/10/2015 10:45 AM, Eric Lamer wrote:
When I access the web
server and click on a list it try to go to
http://list.aaa.com/cgi-bin/mailman/listinfo/g711.1ac instead of
http://list.aaa.com/mailman/listinfo/g711.1ac so my old server had
cgi-bin in the url and my new server does not. How
Hello,
As administrator for the Midfex forum on Ibiblio, I am having a problem
with a user
who posts messages that result in no text appearing on the final
message. I do see
the text in the moderated request sent to me. Here is the message he is
sending.
Note that this request for
On 03/10/2014 12:27 PM, sherwin wrote:
Hello,
As administrator for the Midfex forum on Ibiblio, I am having a problem
with a user
who posts messages that result in no text appearing on the final
message. I do see
the text in the moderated request sent to me. Here is the message he is
I run a mailman (2.1.14-3ubuntu0.1) mailing list for a client. There are
currently 14 emails stuck in the moderator queue. We've tried over and
over again to choose to Discard them and click on Submit.
Every time, the HTTP request POSTs to
/cgi-bin/mailman/admindb/mailing-list-name-here, which
On 02/21/2014 08:07 AM, Andy Jeffries wrote:
Every time, the HTTP request POSTs to
/cgi-bin/mailman/admindb/mailing-list-name-here, which 301 redirects to the
same URL and the GET request loads exactly the same as before (i.e. it
didn't remove any of the stuck emails).
That's the issue.
Hello,
With mailman 2.1.13-5 on Debian/Squeeze, i encountered a problem after
changing the name of the server.
The administration web pages of the existing lists, continue to use
the old server name.
It seeems the server name is encoded in file
/var/lib/mailman/lists/list-name/config.pck
On 01/05/2014 08:00 AM, Dominique Asselineau wrote:
It seeems the server name is encoded in file
/var/lib/mailman/lists/list-name/config.pck updated by the command
config_list -i config-file-name, but i do not find manner to
modify the server name into those pages. host_name specifies only
On 2014-01-05 12:05 PM, Mark Sapiro m...@msapiro.net wrote:
On 01/05/2014 08:00 AM, Dominique Asselineau wrote:
It seeems the server name is encoded in file
/var/lib/mailman/lists/list-name/config.pck updated by the command
config_list -i config-file-name, but i do not find manner to
modify
On 01/05/2014 09:24 AM, Tanstaafl wrote:
Mark - the only setting that changed on mine is the DEFAULT_URL_PATTERN,
but I'm guessing I still need to do the full command.
So, before I do something dumb and blindly run the command and possibly
mess up my lists (that seem to be working fine), I
On 2014-01-05 12:53 PM, Mark Sapiro m...@msapiro.net wrote:
Assuming you have only one URL domain and email domain and they are
properly set as DEFAULT_URL_HOST and DEFAULT_EMAIL_HOST, what you need
to run after changing DEFAULT_URL_PATTERN is just
bin/withlist -l -a -r fix_url
or to see what
Hello,
I just setup mailman on Debian and created the first list mailman.
I receive a new mailing list email, with the link:
http://mysite/cgi-bin/mailman/admin/mailman
Unfortunately when opening this URL I get:
404: The requested URL /cgi-bin/mailman/admin/mailman was not found on
this server.
On 10/20/2013 06:26 AM, Sascha Rissel wrote:
I just setup mailman on Debian and created the first list mailman.
...
I used the following tutorial:
http://www.howtoforge.com/how-to-install-and-configure-mailman-with-postfix-on-debian-squeeze
Please see the FAQ at http://wiki.list.org/x/OIDD.
On 07-10-13 04:36, Mark Sapiro wrote:
On 10/04/2013 05:51 AM, Tim Sterk wrote:
Hi All,
I'm having a problem with outlook.com and mailman. When I'm trying to
send a message through Outlook.com marks it as spam, but when I'm
sending a message from the same domain (and IP address), it is accepted
On 10/09/2013 12:45 AM, Tim Sterk wrote:
They are moved into the unwanted box, so I was able to view the message
and headers from there.
So they were not rejected but rather marked as spam and put in a spam
box rather than the inbox. Had they been rejected, you wouldn't have
seen them at
On 10/04/2013 05:51 AM, Tim Sterk wrote:
Hi All,
I'm having a problem with outlook.com and mailman. When I'm trying to
send a message through Outlook.com marks it as spam, but when I'm
sending a message from the same domain (and IP address), it is accepted
without a hitch.
Underneath the
Hi All,
I'm having a problem with outlook.com and mailman. When I'm trying to
send a message through Outlook.com marks it as spam, but when I'm
sending a message from the same domain (and IP address), it is accepted
without a hitch.
Underneath the headers of a message that is rejected at
Hello
I created two mailing lists on my website:
newslet...@iranravi.com
And:
iranr...@iranravi.com
Also, iranr...@iranravi.com is a member of newslet...@iranravi.com. That
means, when I send an email to newslet...@iranravi.com, if someone is not
the member of this group, but is the member of
On 7/7/13 7:11 PM, Javad Hoseini-Nopendar wrote:
Hello
I created two mailing lists on my website:
newslet...@iranravi.com
And:
iranr...@iranravi.com
Also, iranr...@iranravi.com is a member of newslet...@iranravi.com. That
means, when I send an email to newslet...@iranravi.com, if someone
On 07/07/2013 04:11 PM, Javad Hoseini-Nopendar wrote:
I have a problem. When I send an email, if someone is the member of both
groups, this person will receive two copies of the email. Is there any way I
can prevent duplicate emails? I saw a choice in General options:
Prevent Duplicate
On 06/12/2013 09:36 PM, Brett Delmage wrote:
Characters with diacritics in subscriber names are coming out as ?.
On Wed, 12 Jun 2013, Mark Sapiro wrote:
You have a couple of choices:
1) You can edit bin/list_members and replace
ENC = sys.getdefaultencoding()
by
ENC = 'utf-8'
Hi all,
since upgrading to mailman 2.1.15 the following problem occurs:
When lists admins want to change the list parameters or member-list by the
webinterface they receive:
Error: The form lifetime has expired. (request forgery check) and no change
is done.
IMPORTANT: This error only happens
On 06/13/2013 03:51 AM, Gerhard Rappenecker wrote:
Hi all,
since upgrading to mailman 2.1.15 the following problem occurs:
When lists admins want to change the list parameters or member-list by the
webinterface they receive:
Error: The form lifetime has expired. (request forgery check)
On 06/13/2013 07:56 AM, Gerhard Rappenecker wrote:
the workaround works fine.
This is now reported at
https://bugs.launchpad.net/mailman/+bug/1190802 and properly fixed at
http://bazaar.launchpad.net/~mailman-coders/mailman/2.1/revision/1392.
Thanks a lot for the great support.
We try.
Hi.
checked through the 65,397 list messages in my mail archives first, but
didn't see anything obvious for this.
on ubuntu MM 1:2.1.14-3 I'm trying to export subscribers at the command
line with full names
list_members -f mylistname
Characters with diacritics in subscriber names are
On 06/12/2013 09:36 PM, Brett Delmage wrote:
Characters with diacritics in subscriber names are coming out as ?.
bin/list_members uses the encoding returned by Python's
sys.getdefaultencoding() which is 'ascii' so all non-ascii characters
get converted to '?'
You have a couple of choices:
Hi there everybody
In my mailman administration control panel, I tried to add some Farsi text to
the welcome message, because mailman does not have any
Farsi interface. I added something like this:
خوش آمدید.
But mailman sends only some peculiar numbers and letters instead of Farsi text.
It
On 3/25/2013 5:35 PM, Javad Hoseini wrote:
But mailman sends only some peculiar numbers and letters instead of Farsi
text. It writes something like this in the beginning of
welcome email:
29@5926252wfo
It's hard to see without seeing the actual welcome email message, but my
guess is that
Hi guys, I am working with Mailman version 2.1.13-5 on Debian 6, kernel
2.6.32-5.
I have some lists configured and when I try to delete a user from one of them
doing some of these:
$ echo john.li...@aaamerica.comm.mx | /usr/lib/mailman/bin/remove_members -f
- gerencia
$
On 3/22/2013 1:23 PM, Antonio Colin wrote:
They don't work at all giving a prompt waiting for input. And it ends only
when I press ^C
(throwing a traceback which I posted here: http://pastebin.com/jt8C3Qjq ) or
^Z.
The traceback you posted shows the command is not waiting for input but
I have enabled mailing lists under cPanel on my hosting package and am
doing my own testing to ensure I understand how it works before inviting
other users, and putting the system into service.
Everything was going great with all my tests, till I tried sending a few
messages to the list from
Tim Chesnutt wrote:
I have enabled mailing lists under cPanel on my hosting package and am
doing my own testing to ensure I understand how it works before inviting
other users, and putting the system into service.
See the FAQs at http://wiki.list.org/x/sYA9 and
http://wiki.list.org/x/OIDD.
David Renstrom wrote:
Everytime I create a new list using the Web interface in Mailman I get the
following error:
Bug in Mailman version 2.1.14
We're sorry, we hit a bug!
Please inform the webmaster for this site of this problem. Printing of
traceback and other system information has been
Hi,
Everytime I create a new list using the Web interface in Mailman I get the
following error:
Bug in Mailman version 2.1.14
We're sorry, we hit a bug!
Please inform the webmaster for this site of this problem. Printing of
traceback and other system information has been explicitly inhibited,
hi,
I've ben admistering mailman for several years now. But ran into an odd
issue today. I had a customer come to me and they have a mailing list
b...@blah.com
when they have people use blah-subscr...@blah.com the people are getting
access denied errors i've checked all the settings am i over
mike wrote:
I've ben admistering mailman for several years now. But ran into an odd
issue today. I had a customer come to me and they have a mailing list
b...@blah.com
when they have people use blah-subscr...@blah.com the people are getting
access denied errors i've checked all the settings am i
It works just fine if I log in as root and use newlist, but if I try
to create a new list via the web admin interface, two things happen.
First, I get an error, whose text I do not have in front of me (I
know, I know, first rule of error reporting, report the exact error,
but you probably won't
On Wed, Mar 28, 2012 at 9:34 PM, Steve Matzura sm...@noisynotes.com wrote:
user unknown in virtual mailbox table. My question is, why doesn't
the web interface create new list feature update the aliases file?
What aliases file? Exim, for example, doesn't need one at all. There
are many MTAs,
Steve Matzura wrote:
It works just fine if I log in as root and use newlist, but if I try
to create a new list via the web admin interface, two things happen.
First, I get an error, whose text I do not have in front of me (I
know, I know, first rule of error reporting, report the exact error,
but
Mark Sapiro wrote:
Steve Matzura wrote:
and
second, the aliases file is not updated, so if a subscriber tries to
send a message to the list, they receive an auto-reply telling them
user unknown in virtual mailbox table. My question is, why doesn't
the web interface create new list feature update
The MTA is postfix. The file in question is
/var/lib/mailman/data/aliases which, according to what I've read, is
created from aliases.db. The interesting thing is, virtual-mailman
*is* updated correctly from virtual-mailman.db while aliases is not.
Mailman was installed long before I got here,
Steve Matzura wrote:
The MTA is postfix. The file in question is
/var/lib/mailman/data/aliases which, according to what I've read, is
created from aliases.db.
The other way around.
The interesting thing is, virtual-mailman
*is* updated correctly from virtual-mailman.db while aliases is not.
It would *never* be in my best interest not to give you all the info.
The problem is, I don't know exactly what info you need or want, and
what would be superfluous. Let's see if I can provide more below.
Anything I've omitted, just ask and it shall be yours for the knowing.
On Wed, 28 Mar 2012
On Wed, 28 Mar 2012 12:46:48 -0700, you wrote:
You need to 'chmod 660 /var/lib/mailman/data/virtual-mailman.db' It
must be writable by the 'list group or it can't be updated by the web
server running the create CGI.
I did that and am still receiving the unknown virtual host error when
On Wed, 28 Mar 2012, Steve Matzura wrote:
It would *never* be in my best interest not to give you all the info.
The problem is, I don't know exactly what info you need or want, and
what would be superfluous. Let's see if I can provide more below.
Anything I've omitted, just ask and it shall be
On Wed, 28 Mar 2012 16:24:07 -0500 (CDT), you wrote:
On Wed, 28 Mar 2012, Steve Matzura wrote:
It would *never* be in my best interest not to give you all the info.
The problem is, I don't know exactly what info you need or want, and
what would be superfluous. Let's see if I can provide more
Steve Matzura wrote:
That would be www.theglobalvoice.info with the additional mailman
suffix string, of course. I tried putting add_virtualhost in
mm_cfg.py, but all that did was generate an error saying I'd found a
bug! Obviously that was the wrong thing to do, so I removed it, and
now we're
On Mar 28, 2012, at 4:40 PM, Steve Matzura wrote:
On Wed, 28 Mar 2012 16:24:07 -0500 (CDT), you wrote:
How about the error message you get when you try to create a list via the
web interface. The one that you assumed we would somehow all know without
you telling us (having never
I've obviously bunged this up badly. Now here it is, all correct and
properly assigned to each half of the problem:
When creating the list ad...@theglobalvoice.info, unknown virtual
host is the error, but some way, somehow, the list gets partially
created.
If I send a message to that partially
Steve Matzura wrote:
When creating the list ad...@theglobalvoice.info, unknown virtual
host is the error, but some way, somehow, the list gets partially
created.
How do you know this? Is the list visible in the web UI? In
bin/list_lists?
If I send a message to that partially created list,
Steve Matzura wrote:
I wrote:
How do you know this? Is the list visible in the web UI? In
bin/list_lists?
Neither.
Then the list didn't exist. It was not created, partially or otherwise.
Do you have
add_virtualhost('www.theglobalvoice.info', 'theglobalvoice.info')
or perhaps the
On Wed, 28 Mar 2012 19:37:42 -0700, you wrote:
Did I forget to check or report on anything?
Well, you never answered the questions I asked at
http://mail.python.org/pipermail/mailman-users/2012-March/073113.html
so we don't know what was wrong there, but presumably, you don't care
as you
Using Mailman version 2.1.14-1, I'm trying to get notifications from Youtube
and Facebook automatically accepted.
In Privacy Options - Sender filters - accept_these_nonmembers, I configured
nore...@youtube.com
^notification.*facebookmail\.com$
^update.*facebookmail\.com$
But I'm still
On 1/23/2012 9:46 PM, Степанов Роман Владимирович wrote:
I have a problem when I send mail command to unsubscribe user from specified
mail list with mail command:
unsubscribe somepass address=some email address
I have got message from mailman that password was wrong.
At the
Dear mailman,
I have a problem when I send mail command to unsubscribe user from specified
mail list with mail command:
unsubscribe somepass address=some email address
mailto:address=m...@mail.mail
I have got message from mailman that password was wrong.
At the same time I can
Thanks again. Observations: Somehow the stale lock was stopping all
emails from going out
and secondly, /var/lock/mailman is where the lock was. I'm not sure how
I happened to figure
that lock location out as it isn't ~mailman/locks. Perhaps my config is
non-standard.
Troy
This email was
Troy Campbell wrote:
Thanks again. Observations: Somehow the stale lock was stopping all
emails from going out
and secondly, /var/lock/mailman is where the lock was. I'm not sure how
I happened to figure
that lock location out as it isn't ~mailman/locks. Perhaps my config is
non-standard.
It appears there was a list that created locks in /var/lock/mailman so I
deleted this list and recreated it
and life seems to be good again...thanks again man for the excellent
support!
Troy
This email was created using 100% recycled organic free range electrons.
On 1/12/2012 8:05 PM, Mark
Troy Campbell wrote:
It appears there was a list that created locks in /var/lock/mailman so I
deleted this list and recreated it
and life seems to be good again...thanks again man for the excellent
support!
I'm glad things are again working well for you, but deleting and
recreating the list
For some reason Mailman just stopped working and I must confess that I
have forgot how to debug since it
has run so well for the last couple of years...it appears
that when a Mailman email is sent to the Mailman server it that it
doesn't recognize it as local but instead tries to
relay out and
Troy Campbell wrote:
For some reason Mailman just stopped working and I must confess that I
have forgot how to debug since it
has run so well for the last couple of years...it appears
that when a Mailman email is sent to the Mailman server it that it
doesn't recognize it as local but instead
1 - 100 of 974 matches
Mail list logo
