27, 2017 11:15 AM
> >> To: mercedes@okiebenz.com
> >> Cc: Kaleb C. Striplin <ka...@striplin.net>
> >> Subject: [MBZ] Cruise control solder
> >>
> >> So after replacing the caps it worked but was intermittent. So I
> reflowed the
> >> solder on
Sent: Sunday, August 27, 2017 11:15 AM
>> To: mercedes@okiebenz.com
>> Cc: Kaleb C. Striplin <ka...@striplin.net>
>> Subject: [MBZ] Cruise control solder
>>
>> So after replacing the caps it worked but was intermittent. So I reflowed the
>> solder on all the
rcedes [mailto:mercedes-boun...@okiebenz.com] On Behalf Of
> Kaleb C. Striplin via Mercedes
> Sent: Sunday, August 27, 2017 11:15 AM
> To: mercedes@okiebenz.com
> Cc: Kaleb C. Striplin <ka...@striplin.net>
> Subject: [MBZ] Cruise control solder
>
> So after replacing the caps i
This is tricky business, to be sure. Often took me more than once to get
it working. So far, though, no solder bridges. Acute attention to detail
is paramount.
-- Jim
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To
https://wiki.ezvid.com/best-headband-magnifiers?id=adw=EAIaIQobChMIs67O5fL31QIVEol-Ch3NeQd-EAMYAiAAEgIwXvD_BwE
These... apparently, had a senior moment and failed to click paste..
oops...
On Sun, Aug 27, 2017 at 10:10 AM, G Mann wrote:
> Kaleb, have a look at these... I find
Kaleb, have a look at these... I find the head band lighted magnifier with
interchangeable lenses give good result.
Often.. things that need more "seeing" can't be brought to the bench and
put under the stationary lense... the headband goes where I am... more
light can be supplied with a LED
Spencer! Your eyes are younger than mine, can you find the spot where the
solder bridges over two connections?
Good boy. Now go away and get yourself a popsicle out of the freezer.
Mitch.
> On August 27, 2017 at 11:14 AM "Kaleb C. Striplin via Mercedes"
> wrote:
>
>
So after replacing the caps it worked but was intermittent. So I reflowed the
solder on all the joints. It worked better but still intermittent. I pulled it
again yesterday and reflowed the joints again and added a little solder to a
few joints that were lacking. Put the board back in the car