It seems than at Fri, 7 Sep 2007 22:37:49 -0400, archer wrote:
> A "microphone array" is what I would like to build but I'm not sure
> about which unidirectional microphones to use.
> A system of about 12 or 15 microphones which would be
> positioned around a conference table and connected to a c
It seems than at Fri, 7 Sep 2007 17:49:04 -0400, archer wrote:
> Question:
> Are there any audio engineers or technicians on this group?
> Gerry Archer
> '83 300D and 240D
Yeah - why?
-- Philip
___
http://www.okiebenz.com
For new parts see officia
See posting to the group; OK Don and Jeff.
Thanks,
Gerry
--
- Original Message -
From: "Robert & Tara Ludwick" <[EMAIL PROTECTED]>
>I run a recording studio on the side...or at least I did before the fuel
> and utility prices went nuts. Now all the bro
- Original Message -
From: "OK Don" <[EMAIL PROTECTED]>
> Sounds like a very worthwhile project. First - (and remember, I'm the
> one with a little knowledge, and lots of opinions) - you can limit
> some of the room noise by filtering the audio down to the frequency
> range needed for voi
Sounds like a very worthwhile project. First - (and remember, I'm the
one with a little knowledge, and lots of opinions) - you can limit
some of the room noise by filtering the audio down to the frequency
range needed for voice communication - around 3kHz. Do this in the
pre-amp stage.
I expect tha
I run a recording studio on the side...or at least I did before the fuel
and utility prices went nuts. Now all the broke musicians are REALLY
broke and business is slim at best. We specialize in recording all
acoustic stuff so I know very little about noisy distortion effects or
any of that mid
I sent the question direct to Trampas, thinking he was the only
engineer/technician. Here's what I wrote him:
A "microphone array" is what I would like to build but I'm not sure about
which unidirectional microphones to use.
A system of about 12 or 15 microphones which would be positioned around
I'm neither one, but am full of unfounded opinions on subjects that I
know only a little about. Ask away!
On 9/7/07, Jeff Zedic <[EMAIL PROTECTED]> wrote:
> I'm the opposite of Trampas, I'm an audiophile but not an engineer.
>
> What's the Q?
>
> Jeff Zedic
--
OK Don, KD5NRO
Norman, OK
"There ar
I'm the opposite of Trampas, I'm an audiophile but not an engineer.
What's the Q?
Jeff Zedic
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]
To Unsubscribe or change deliver
electronic gadgets. The last
one I just finished was a microphone array.
Trampas
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of archer
Sent: Friday, September 07, 2007 5:49 PM
To: Mercedes Discussion List
Subject: [MBZ] Looking for audio guy
Question:
Are
On 9/7/07, Mitch Haley <[EMAIL PROTECTED]> wrote:
>
>
> archer wrote:
> >
> > Question:
> > Are there any audio engineers or technicians on this group?
>
> Whatever happened to Jaime? Did he sell his Benz, or just drop off the list?
Kopchinski? I wonder that too. His web site http://www.jaimekop
archer wrote:
>
> Question:
> Are there any audio engineers or technicians on this group?
Whatever happened to Jaime? Did he sell his Benz, or just drop off the list?
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.
Question:
Are there any audio engineers or technicians on this group?
Gerry Archer
'83 300D and 240D
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]
To Unsubscribe or change
13 matches
Mail list logo