ery tired 95 E300D, 462,000 miles
>
> -Original Message- From: Kaleb C. Striplin via Mercedes
> Sent: Wednesday, October 04, 2017 2:04 PM
> To: Mercedes Discussion List
> Cc: Kaleb C. Striplin
> Subject: Re: [MBZ] Tranny plug, etc.
>
> You already pulled the plug on
Discussion List
Cc: Kaleb C. Striplin
Subject: Re: [MBZ] Tranny plug, etc.
You already pulled the plug on drivers side middle? And the other one is at
the back?
Sent from my iPhone
On Oct 4, 2017, at 11:51 AM, Rich Thomas via Mercedes
wrote:
I'm fixing to pull the engine/tranny in
I got it off after I dropped the back of the tranny and saw the bolt. I guess
it’s the speed sensor. I’ll have to fish all that stuff out if I want to use it
again. I think there’s only the two connectors but I’ll look to make sure
before I start pulling.
--R
Sent from iPhone
> On Oct 4, 2017
Are you going to do anything with the 420 Body after you pull the
engine/transmission? If not, I'd say use a hot wrench (wire cutters)
LarryT
On 10/04/2017 12:51 PM, Rich Thomas via Mercedes wrote:
I'm fixing to pull the engine/tranny in this 420SEL donor, I pulled
off on electrical connectio
I guess I am not sure then. The only ones I am aware of is the neutral switch
in the middle which has a bigger plug with a twist off holder on it, and at the
rear is the speed sensor which has a 10mm bolt holding it in, and the kickdown
switch which is either pushed on or held on with a screw us
Yeah it is a bit behind the one in front, driver side, a bit larger plug
--R
On 10/4/17 2:04 PM, Kaleb C. Striplin via Mercedes wrote:
You already pulled the plug on drivers side middle? And the other one is at the
back?
Sent from my iPhone
On Oct 4, 2017, at 11:51 AM, Rich Thomas via Merc
You already pulled the plug on drivers side middle? And the other one is at the
back?
Sent from my iPhone
> On Oct 4, 2017, at 11:51 AM, Rich Thomas via Mercedes
> wrote:
>
> I'm fixing to pull the engine/tranny in this 420SEL donor, I pulled off on
> electrical connection (front one) on th
I'm fixing to pull the engine/tranny in this 420SEL donor, I pulled off
on electrical connection (front one) on the tranny, there is another
one, bigger, behind it, that is a bugger to get at and pull off. Is
there some kind of clip or screw or something holding it on, or will
this one just pu