Thanks, all, for slapping me with some common sense. I'll get the
head job.
Dan
P.S. Anybody have that door handle, visor clips and license plate
valance for a 88 300TE?
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buym
On Apr 4, 2006, at 10:57 AM, Richard Hattaway wrote:
Johnny B. overlooks the ideal reason (and maybe only) to use a very
very small skim of Hylomar when installing any gasket.. it keeps the
darn thing in place while you move stuff around.
Richard
No, I use locating pins that screw into hea
On Apr 3, 2006, at 5:42 PM, Christopher McCann wrote:
Is this something that you should use as a matter of course when
changing any head gasket?
Chris
This is something that I choose to do, especially when the head and
block are of dissimilar metals. I have no idea whether Ma Benz
a
Yes.
Nothing. All modern composition gaskets have sealant applied where
needed.
Peter
Is this something that you should use as a matter of course when changing any
head gasket?
Chris
John Berryman <[EMAIL PROTECTED]> wrote:
On Apr 1, 2006, at 10:42 AM, Bob DuPuy wrote:
> Johny!
> I thought it was you that recomended Hylomar. I went to their web
> site, which product do yo
On Apr 1, 2006, at 10:42 AM, Bob DuPuy wrote:
Johny!
I thought it was you that recomended Hylomar. I went to their web
site, which product do you recomend for head gaskets? Do you have any
additional wisdom to share, as to application? I can't afford to screw
the pooch on this one.
Thanks,
Bo
Johny!
I thought it was you that recomended Hylomar. I went to their web
site, which product do you recomend for head gaskets? Do you have any
additional wisdom to share, as to application? I can't afford to screw
the pooch on this one.
Thanks,
Bob DuPuy
On Apr 1, 2006, at 9:01 AM, Bob DuPuy wrote:
I'm doing another OM603 head today, actually putting a decent 350SDL
head on a 300SDL. In the past I've always put the gasket on dry, but
this time I'm considering using a sealer like Permatex copper spray on
the head side. There are a few pits aroun
I'm doing another OM603 head today, actually putting a decent 350SDL
head on a 300SDL. In the past I've always put the gasket on dry, but
this time I'm considering using a sealer like Permatex copper spray on
the head side. There are a few pits around water passages and the like
on the replacement