Following patches are applied, thanks.
[PATCH v2 1/3] usdpaa: Added fmc in usdpaa dependency list.
[PATCH v2 2/3] usdpaa: export ARCH for all tasks
[PATCH v2 3/3] cryptodev: compile testprogs and package them to ${PN}-tests
Best Regards,
Zhenhua
> -Original Message-
> From: Liu Ting-B
On Tue, Jun 18, 2013 at 11:04 PM, Alexey Mednyy wrote:
> | error: Failed dependencies:
> | libgsl-fsl-mx51 >= 11.09.01 is needed by
> libz160-11.09.01-r2.armv7a_vfp_neon
> | ERROR: Function failed: do_rootfs (see
> /home/swex/Yocto/build/tmp/work/imx53qsb-poky-linux-gnueabi/core-image-x11-1.
| error: Failed dependencies:
| libgsl-fsl-mx51 >= 11.09.01 is needed by
libz160-11.09.01-r2.armv7a_vfp_neon
| ERROR: Function failed: do_rootfs (see
/home/swex/Yocto/build/tmp/work/imx53qsb-poky-linux-gnueabi/core-image-x11-1.0-r0/temp/log.do_rootfs.9830
for further information)
ERROR: Task
On Tue, Jun 18, 2013 at 3:14 PM, Fabio Estevam wrote:
> On Tue, Jun 18, 2013 at 3:05 PM, Otavio Salvador
> wrote:
>
>> No; surely not.
>>
>> Once we have it applied we can redo this. No reason to keep Contatec
>> broken (as GPU were not working with 1.0.0 kernel) when we have the
>> patches.
>
>
On Tue, Jun 18, 2013 at 3:05 PM, Otavio Salvador
wrote:
> No; surely not.
>
> Once we have it applied we can redo this. No reason to keep Contatec
> broken (as GPU were not working with 1.0.0 kernel) when we have the
> patches.
Yes, I understand the kernel issue.
My point was related to the U-b
On 06/18/2013 03:01 PM, Eric Nelson wrote:
Thanks Daiane,
On 06/18/2013 10:50 AM, Daiane Angolini wrote:
On 06/18/2013 02:38 PM, Eric Nelson wrote:
On 06/18/2013 10:05 AM, Fabio Estevam wrote:
Hi Eric,
On Tue, Jun 18, 2013 at 1:55 PM, Eric Nelson
wrote:
I thought this would only take a fe
On Tue, Jun 18, 2013 at 2:51 PM, Fabio Estevam wrote:
> On Tue, Jun 18, 2013 at 2:48 PM, Otavio Salvador
> wrote:
>
>> Sorry for the unclear comment. I applied Leo's patches to
>> meta-fsl-arm-extra (using u-boot-imx 2008.09 for now).
>
> Ok, understood. Then my effort in this thread was in vain
Thanks Daiane,
On 06/18/2013 10:50 AM, Daiane Angolini wrote:
On 06/18/2013 02:38 PM, Eric Nelson wrote:
On 06/18/2013 10:05 AM, Fabio Estevam wrote:
Hi Eric,
On Tue, Jun 18, 2013 at 1:55 PM, Eric Nelson
wrote:
I thought this would only take a few minutes, but I did put
together a U-Boot "
Thanks for the review Otavio.
On 06/18/2013 10:24 AM, Otavio Salvador wrote:
On Tue, Jun 18, 2013 at 1:55 PM, Eric Nelson
wrote:
...
I'll put together another one that's a bit more definitive since
things are now pretty stable.
Silly me.
I thought this would only take a few minutes, but I
On 06/18/2013 02:38 PM, Eric Nelson wrote:
On 06/18/2013 10:05 AM, Fabio Estevam wrote:
Hi Eric,
On Tue, Jun 18, 2013 at 1:55 PM, Eric Nelson
wrote:
I thought this would only take a few minutes, but I did put
together a U-Boot "Getting started" guide:
http://boundarydevices.com/u-bo
On Tue, Jun 18, 2013 at 2:48 PM, Otavio Salvador
wrote:
> Sorry for the unclear comment. I applied Leo's patches to
> meta-fsl-arm-extra (using u-boot-imx 2008.09 for now).
Ok, understood. Then my effort in this thread was in vain :-)
___
meta-freescal
On Tue, Jun 18, 2013 at 2:35 PM, Fabio Estevam wrote:
> On Tue, Jun 18, 2013 at 2:26 PM, Otavio Salvador
> wrote:
>
>>> The support of the ethernet is missing, the patch that add the support of
>>> the
>>> Micrel KSZ9031 is still marked as "New"
>>> http://patchwork.ozlabs.org/patch/218793/ .
>>>
On 06/18/2013 10:05 AM, Fabio Estevam wrote:
Hi Eric,
On Tue, Jun 18, 2013 at 1:55 PM, Eric Nelson
wrote:
I thought this would only take a few minutes, but I did put
together a U-Boot "Getting started" guide:
http://boundarydevices.com/u-boot-on-i-mx6/
Excellent document! Very goo
On Tue, Jun 18, 2013 at 2:26 PM, Otavio Salvador
wrote:
>> The support of the ethernet is missing, the patch that add the support of
>> the
>> Micrel KSZ9031 is still marked as "New"
>> http://patchwork.ozlabs.org/patch/218793/ .
>> That are the main missing features.
>
> Ok; I applied this as is
On Tue, Jun 18, 2013 at 9:47 AM, SARTRE Leo wrote:
> Le Tuesday 18 June 2013 14:04:55, Otavio Salvador a écrit :
>
>
>> On Tue, Jun 18, 2013 at 4:12 AM, SARTRE Leo
> wrote:
>> > Hi Otavio,
>> >
>> >> The upcoming U-Boot (2013.07) has the Congatec SOM support merged;
>> >> does it provides same fe
On Tue, Jun 18, 2013 at 1:55 PM, Eric Nelson
wrote:
...
>> I'll put together another one that's a bit more definitive since
>> things are now pretty stable.
>>
>
> Silly me.
>
> I thought this would only take a few minutes, but I did put
> together a U-Boot "Getting started" guide:
> http:
Hi Eric,
On Tue, Jun 18, 2013 at 1:55 PM, Eric Nelson
wrote:
> I thought this would only take a few minutes, but I did put
> together a U-Boot "Getting started" guide:
> http://boundarydevices.com/u-boot-on-i-mx6/
>
Excellent document! Very good work, Eric.
Regards,
Fabio Estevam
On 06/17/2013 01:25 PM, Eric Nelson wrote:
Thanks Otavio,
On 06/17/2013 12:52 PM, Otavio Salvador wrote:
On Fri, Jun 14, 2013 at 7:43 PM, Eric Nelson
wrote:
Than I tried to rewrite the UBoot in Nand with the wiki of linaro (
https://wiki.linaro.org/Boards/MX6QSabreLite )
Why did you do thi
Hi Leo,
On 06/18/2013 08:58 AM, SARTRE Leo wrote:
Le Tuesday 18 June 2013 17:39:15, Eric Nelson a écrit :
Hi Leo,
Hi Eric,
This isn't an issue, it's a policy decision by Linaro because they
wanted to **force** SD card boot.
Ok, that was not very clear in their explanation that it comes f
Le Tuesday 18 June 2013 17:39:15, Eric Nelson a écrit :
> Hi Leo,
>
Hi Eric,
> This isn't an issue, it's a policy decision by Linaro because they
> wanted to **force** SD card boot.
>
Ok, that was not very clear in their explanation that it comes from a policy
decision...
> This Linaro hack
Hi Leo,
On 06/18/2013 07:27 AM, SARTRE Leo wrote:
> If you have your boot pins (or fuses) correctly setup and flash it to
> the correct offset, it should just boot, no?
>
When I try to flash a mainline U-boot (that works when I write it in SD
card)
into the SPI NOR, the board doesn't boot.
T
On Jun 18, 2013, at 6:55 AM, Thanassis Silis wrote:
> Hello everyone,
> it seems tcf-agent is not provided. Not even in the -sdk image I created. And
> that is where my problems start:
>
> using this in my local.conf: IMAGE_INSTALL_append = " tcf-agent"
> I expected to be able to automate the
On Tue, Jun 18, 2013 at 11:59 AM, SARTRE Leo
wrote:
> Hi Fabio,
>
> some news: you were right mainline Uboot can be flashed to SPI NOR.
> I was trying to flash a non-padded Uboot into the SPI NOR, I've just try to
> flash the same binary with a block of 1024 bits of zeros padded on the top
> of
>
Le Tuesday 18 June 2013 16:27:05, SARTRE Leo a écrit :
> > If you have your boot pins (or fuses) correctly setup and flash it to
> > the correct offset, it should just boot, no?
>
> When I try to flash a mainline U-boot (that works when I write it in SD
> card) into the SPI NOR, the board doesn't
> If you have your boot pins (or fuses) correctly setup and flash it to
> the correct offset, it should just boot, no?
>
When I try to flash a mainline U-boot (that works when I write it in SD card)
into the SPI NOR, the board doesn't boot.
The binary that I flash is a non-padded Uboot and I pla
Dash should be supported by Yocto now, seems like a permission issue.
You can try to run the command manually to see what happens.
Best Regards,
Zhenhua
> -Original Message-
> From: meta-freescale-boun...@yoctoproject.org [mailto:meta-freescale-
> boun...@yoctoproject.org] On Behal
On 2013-06-18 14:14, Fikret Alim wrote:
Hello,
I got the following error during compile process. What can be the reason, how
can I solve it?
I believe this is because you have dash, not bash, as your shell.
Try this:
# sudo dpkg-reconfigure dash
ubuntu@ubuntu:~/projects/fsl-community-bsp/
On Tue, Jun 18, 2013 at 10:53 AM, SARTRE Leo
wrote:
> Yes sorry I mean the SPI NOR, u-boot-imx can be flashed into the SPI NOR,
> Uboot
> mainline doesn't support boot from SPI NOR.
Why not?
If you have your boot pins (or fuses) correctly setup and flash it to
the correct offset, it should just
Le Tuesday 18 June 2013 15:32:48, Fabio Estevam a écrit :
> On Tue, Jun 18, 2013 at 9:47 AM, SARTRE Leo
wrote:
> > Mainline U-Boot cannot boot from NOR, so the only way to use it on this
> > board
>
> I don't understand. Do you mean SPI NOR or a parallel NOR?
>
Yes sorry I mean the SPI NOR, u-
Hello everyone,
it seems tcf-agent is not provided. Not even in the -sdk image I created. And
that is where my problems start:
using this in my local.conf: IMAGE_INSTALL_append = " tcf-agent"
I expected to be able to automate the process of generating the tcf-agent and
deploying it in my image w
On Tue, Jun 18, 2013 at 9:47 AM, SARTRE Leo wrote:
> Mainline U-Boot cannot boot from NOR, so the only way to use it on this
> board
I don't understand. Do you mean SPI NOR or a parallel NOR?
How does the other U-boot version deal with it?
> is to use a big hack (simmilar as the one made by Li
Hello,
I got the following error during compile process. What can be the reason,
how can I solve it?
Thanks&Best Regards,
Fikret
ubuntu@ubuntu:~/projects/fsl-community-bsp/fsl-community-bsp/build$ bitbake
fsl-image-test
Pseudo is not present but is required, building this first before the main
b
Le Tuesday 18 June 2013 14:04:55, Otavio Salvador a écrit :
> On Tue, Jun 18, 2013 at 4:12 AM, SARTRE Leo
wrote:
> > Hi Otavio,
> >
> >> The upcoming U-Boot (2013.07) has the Congatec SOM support merged;
> >> does it provides same features than this version? I'd prefer to move
> >> to it, if it
On Tue, Jun 18, 2013 at 4:12 AM, SARTRE Leo wrote:
> Hi Otavio,
>
>
>
>> The upcoming U-Boot (2013.07) has the Congatec SOM support merged;
>> does it provides same features than this version? I'd prefer to move
>> to it, if it is the case.
>
> The support merged to U-Boot (2013.07) miss some feat
Hi Gary,
On Tue, Jun 18, 2013 at 4:02 AM, Gary Thomas wrote:
>> I don't have a mx35pdk board handy, but looking at the defconfig both
>> framebuffer and camera support are selected.
>>
>
> Indeed, but neither one works - there is no /dev/fb* nor /dev/video*
I will boot my mx35pdk when I have a
On 2013-06-18 02:36, Liu Ting-B28495 wrote:
This was fixed in commit:
http://git.yoctoproject.org/cgit/cgit.cgi/poky/commit/?id=14010b4a60072641bab62c761edffc51148ae6e9
use latest poky or cherry-pick this commit.
Thanks, that fixed it. I can now build a complete image for the P1022DS.
-
Hi Otavio,
> The upcoming U-Boot (2013.07) has the Congatec SOM support merged;
> does it provides same features than this version? I'd prefer to move
> to it, if it is the case.
The support merged to U-Boot (2013.07) miss some features that the Freescale's
U-boot offer. Maybe, right now, it is
On 2013-06-17 22:59, Fabio Estevam wrote:
On Mon, Jun 17, 2013 at 12:53 PM, Gary Thomas wrote:
Manual build using this configuration file does work. However, there
are a lot of bits missing, e.g. frame buffer and camera. How do I enable
(use?) them on the PDK?
I don't have a mx35pdk board
38 matches
Mail list logo
