Re: [Mikrotik] RB411U and 3G cards

wihtout connection. NB: With 0 you need to remove power to MKT to restart 3G card Bye! --- Sim -- Forwarded message -- From: Glenn Finch gl...@glmobile.com Date: 2014-01-30 Subject: [Mikrotik] RB411U and 3G cards To: Mikrotik@mail.butchevans.com Mikrotik@mail.butchevans.com Has

Re: [Mikrotik] IPSec for mobile

Hi, this is that you need :-) # Server Preshared (1234567abcdef) config /interface l2tp-server server set enabled=yes /ip ipsec proposal set [ find default=yes ] auth-algorithms=sha1 disabled=no enc-algorithms=3des,aes-256 \ lifetime=30m name=default pfs-group=modp1024 /ip ipsec peer add

Re: [Mikrotik] IPSec for mobile

iPhone IPsec is for Cisco (see logo). Use L2TP+IPsec (first choice on your mobile device) Regards 2012/8/22 Meftah Tayeb tayeb.mef...@gmail.com: thank you a lot ! is L2TP required? or IPSec can work alone ? - Original Message - From: Sim simvi...@gmail.com To: Mikrotik discussions

Re: [Mikrotik] IPSec for mobile

on the tunnel but are they just arbitrary, non-routable addresses? Is the iPhone in this case going to find itself attached to this router but with a 192.168.255.254 address? Do you then need to src.nat your way out into the world beyond? -Ty On Wed, Aug 22, 2012 at 8:39 AM, Sim simvi

Re: [Mikrotik] IPSec for mobile

-Size=4 [admin@Edge01-493-Alger] /ppp secret - Original Message - From: Sim simvi...@gmail.com To: Mikrotik discussions mikrotik@mail.butchevans.com Sent: Wednesday, August 22, 2012 4:44 PM Subject: Re: [Mikrotik] IPSec for mobile iPhone IPsec is for Cisco (see logo). Use L2TP

Re: [Mikrotik] IPSec for mobile

, iPhone and Android! Check: Do not forget to allow: - UDP 500 (Dst.Port), - UDP 1701, - UDP 4500 (Nat-Traversal) - and Protocol 50 (ESP) in the firewall filter settings. (Input chain, accept). 2012/8/22 Meftah Tayeb tayeb.mef...@gmail.com: question, sim is l2tp itself alone good? i think it's

Re: [Mikrotik] IPSec for mobile

- From: Sim simvi...@gmail.com To: Mikrotik discussions mikrotik@mail.butchevans.com Sent: Wednesday, August 22, 2012 9:50 PM Subject: Re: [Mikrotik] IPSec for mobile For security reason L2TP isn't good. Ipsec + L2TP is the only way supported by iPhone (it ask you security/secret and not only

Re: [Mikrotik] IPSec for mobile

- Original Message - From: Sim simvi...@gmail.com To: Mikrotik discussions mikrotik@mail.butchevans.com Sent: Wednesday, August 22, 2012 9:55 PM Subject: Re: [Mikrotik] IPSec for mobile Reduce lacency? Contact your 3G/WiFi/Provider ;- Bye! 2012/8/22 Meftah Tayeb tayeb.mef

[Mikrotik] IPROUTE2 multiple GW

Hello! I need to convert this Linux config to Mikrotik config. I've TWO internet lines: HDSL and ADSL. HDSL is the default gateway (ETH2) I need to connect to Mikrotik (VPN) from ADSL PORT. In this way all connection from/to ADSL will be forwarded over them and not over default gw. In linux I

Re: [Mikrotik] IPROUTE2 multiple GW

Hello! Thanks for your idea I will try it! PS: is not possible use similar iproute2, also for other case? 2012/7/30 Meftah Tayeb tayeb.mef...@gmail.com: you need to mark your VPN subnet and add a default route for it makr it in /ip firewall mangle add and mark route using action action

Re: [Mikrotik] Problem adding R52H to RB411U

... 2012/5/27 Josh Luthman j...@imaginenetworksllc.com: Try 5.14? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On May 27, 2012 4:30 PM, Sim simvi...@gmail.com wrote: ___ Mikrotik mailing list

[Mikrotik] Problem adding R52H to RB411U

: 0x4218d8 rb: RB_READ_INFO The RB is real instable (crash and very very slow) with R52H into slot. Thanks for your support. Best regards --- Sim