Not trying to be esoteric, if you're talking about the actual
documentation/visualization part of it (not automated discovery), then
you can make a spreadsheet of edges/vertexes (e.g. routers and
connecting interfaces) and feed it into graphviz. This approach has the
benefit of storing the dat
ed by another of their
peers, they would ignore your routes.
-Kristian
On 11/01/2017 12:40 PM, Kristian Hoffmann via Mikrotik-users wrote:
> I think the "best" answer lies with BGP communities. What you're
> looking for what I've seen called a "backup only" rou
I think the "best" answer lies with BGP communities. What you're
looking for what I've seen called a "backup only" route. You can try
asking Charter support for a list of their supported BGP communities.
The goal would be to announce your prefixes to them with a community
that instructs them
https://routerboard.com/RB960PGS
5 ports, check
SFP, check
POE, check
ROS, check
On 06/23/2017 03:22 PM, Blair Davis via Mikrotik-users wrote:
> Looking for a routerboard with 4-8 Ethernet ports and a fiber cage...
>
> POE out on the Ethernet ports would be nice...
>
> But I need ROS, not a swi
The models are listed here...
https://wiki.mikrotik.com/wiki/MikroTik_SFP_module_compatibility_table
See the section titled "SFP+ interface compatibility settings with 1G
links."
Also, I think the ones that do both (most) have the interface called
sfp-sfpplusX by default.
-Kristian
On 05/
Short version...
Set up both 951s as APs (there's probably a quickset for that).
On the real/wired AP, set wds-mode=dynamic, and
wds-default-bridge=yourbridge.
On the remote AP, set mode=wds-slave instead of ap-bridge.
From http://wiki.mikrotik.com/wiki/Manual:Interface/Wireless...
"/wds-slav
Depending on the hardware release and firmware version, you have to run
vlan_add or something like that to allow the VLANs you want to be passed
through the ApexLynx.
-Kristian
On 09/16/2016 09:10 AM, Christian Palecek via Mikrotik-users wrote:
Hello,
I am having an issue that I’m not sure